Where to find the wifi password on your computer. How to find your Wi-Fi password

Hello dear readers! In this article we will figure out how to find out the Wi-Fi password. Nowadays, more and more devices that we use in everyday life have built-in means for accessing the Internet. To organize shared access to a global network of smartphones, laptops, media players, televisions and other equipment, it is necessary to combine all devices into a single network.

Organizing such a network is quite difficult and requires certain knowledge, so many users trust this process to friends, acquaintances or specialists. It often happens that, after finishing work, specialists do not leave any configuration data, unless of course they are specifically asked about it. Some do not give this data because they want you to call him next time, or they may simply forget or consider it unnecessary. At the initial stage, there is no particular need to know this data - everything works as it is, the task is completed and no one wants to bother themselves with unnecessary details. But over time, new devices appear that would also be nice to connect to the network, and here the question arises - how to find out your Wi-Fi password.

Attention! If you call a specialist who sets up Wi-Fi, be sure to ask him for the password and write it down so you don’t forget.

I recently read somewhere that according to statistics, more than half of all users use wireless connection to the Internet, which implies the presence of a special device called a router. This is a device that identifies all devices on the network and their shared access to the Internet. One of the main signs by which a router allows “its” users to pass is the password. It is set for the entire network and is checked with every connection request. Therefore, if the password is not known, then in order to carry out any actions related to changing existing settings or registering new devices, it is necessary to recover it. You can, of course, call the person who set up Wi-Fi again, but this will require time and money. So we come to the very topic of the article;).

How to find out the Wi-Fi password from a computer

If there is at least one computer on which a connection to a wireless network is already configured and working, then finding out the Wi-Fi password is quite simple. Next we will show how to do this for a device running Windows 7; for other operating systems the process will be almost exactly the same.

So, go to “Start”, click “Control Panel”. Next, select “Network and Sharing Center”, where information and connection settings opens local network.

You can also get here more in a fast way. To do this, find the local or wireless network icon in the tray and right-click. A context menu of two items will appear; we need to select “Network and Sharing Center”. I think this method is much simpler, because you don’t need to make unnecessary mouse movements.
Now on the left side of the screen click on “Manage” wireless networks"(if this item is not there, read on):

Next, select the network whose password we want to know, call up the context menu by right-clicking and select “Properties”.

In the window that opens, go to the “Security” tab. To see the password, check the “Display entered characters” checkbox. You can get to these settings faster by left-clicking on the tray icon and right-clicking on the connection for which you need to find out the password. A context menu will appear, click “Properties”.

Now opposite “Network security key” we see the Wi-Fi password. All that remains is to register it in the necessary devices and they will have access to the Internet.

If “Manage wireless networks” is missing, then you need to go to “Change adapter settings”.

Now find the wireless connection through which you connect to your router, right-click on it and select “Status”.

How to find out or change your wi-fi password on a router

If there are no computers connected via Wi-Fi, you can change the password in the router settings. Let's look at this process using the Huawei HG530 Wi-Fi router as an example. To enter the control menu, in the browser line, type the address 192.168.1.1 (in other models this value may be different, if this does not work, then look at the instructions).

If you do not know the IP address of your router, then you can find it on a computer that has Internet access through this router. So, we have this computer, now we left-click on the network and click “Network and Sharing Center” (I showed another way to get into the network management settings).

On the left, click “Change adapter settings.”

Now you need to right-click on the connection that is used to access the Internet. In my case, I am currently using Wi-Fi, which means I need a “Wireless Network Connection”. In the context menu, click “Status”.

In the window that opens, click “Information...”.

In this window you need to find the line “Default gateway IPv4”. Exactly, what is to the right is the IP address of the router that we need to log into. And by “DHCP – IPv4 server” you can find out whether the router distributes IP addresses automatically.

If you didn’t know, the router can distribute IP addresses automatically (DHCP), and if automatic distribution is disabled, then you need to register IP addresses, this method is called static. As I said above, my IP: 192.168.1.1.

If everything I said above did not help you, then there is another option. Pay attention on the back of your router, or rarely on the bottom, there may be a sticker on which the IP address is sometimes written. Sometimes I find that the router settings are located directly on the router itself.

I'm attaching a photo below so you can roughly understand where to look for this information.

Now open any browser and enter the IP address of your router in the address bar and press “Enter”.

A standard window will appear where you need to enter your username and password to enter the router menu. By default, as a rule, this is admin-admin (again, in case of difficulties, study the instructions, or pay attention to the sticker), these parameters are rarely changed. If the admin password does not work, you can try pass or password.

It happens that you can log in without a password at all, just enter admin and click “Login.” After correct input we find ourselves in the main menu:

In my router you need to click “Basic” - “Wireless Lan”.

As you can see from the screenshot above, my current password is “Abracadabra” (for example). In some routers you cannot view the existing password, but you can see the words “Password Viewer”, “Click here to display” or something similar next to the password. By clicking on the corresponding inscription, the Wi-Fi password appears. If the router does not have a password viewing function, then you can enter your password, that is, change it.

Of course, yours may be a little different. For example, you need to click on “Wireless” - “Security”. As you understand, even if there are some differences, you can still roughly understand where the settings for Wi-Fi are. If there are no signs related to Wi-Fi, then we simply go through all the sections.

A small warning: if you change the network name, you will have to reconnect all devices. If you just change the password, then network connections will remain the same, you just need to replace the old password with a new one.

This is how you can quickly and easily find out or change the password for your Wi-Fi wireless network without turning to outside specialists.

Also, to find out the Wi-Fi password, you can consider the option of calling the specialist who set up your router. But you need to be prepared for the answer that he forgot it and didn’t write it down in his notebook. Usually they answer that you need to come and look at the password, and if you even ask how to do it yourself, you most likely will not get a positive answer. This is a double-edged sword, he wants you to pay him money, because he needs to come to you, wasting his time, for which naturally you will need to pay.

This is where I end this article, see you soon!

For a visual example, watch the video on how to find out the password on D-link:

In every article on setting up a router, or in instructions on changing passwords, I advise you to write down somewhere the password that you set for your home Wi-Fi. Or set a password that you definitely won’t forget, but at the same time, it should be strong enough. As you understand, few people do this, to be honest, I don’t write anything down either :) And the password is such a thing that if you forget it, it’s very difficult to remember, you’ll try a bunch of options and nothing will work. And here you just need to connect to your Wi-Fi new device. In this article I will tell you what to do in such cases. How to remember forgotten password from the Wi-Fi network, where you can see it in the computer settings, or the router itself. I will try to write in detail about all the nuances, possible problems and not miss anything.

How can you find out your forgotten Wi-Fi password:

View the password in the computer settings if you have already connected (or are connected) to a network for which we need to find out the password.
View the password in the Wi-Fi router settings.
Reset the router, configure it again and set a new password.

We'll start with the simplest thing, which is, of course, the computer. If you have a laptop (or PC with adapter), which has already been connected to your Wi-Fi, or is currently connected, then most likely we will be able to look in the settings for the password that we have successfully forgotten.

Looking for a forgotten Wi-Fi password on a computer: Windows 7, 8, 10

Many people ask where to find this password on a computer? In Windows 7, Windows 8 and Windows 10 this is not difficult to do, but XP has its own problems. Let's look at newer versions of Windows first. On seven and eight everything is almost the same.

Attention! Your computer from which you want to remember the network key must be connected to this network. If he connected to it before, that’s fine too. If you do not have such a computer, then go straight to the section where we will look at the password in the router settings.

And one moment: if you don’t want to mess around with the settings, you can try to do everything with the WirelessKeyView program, which I wrote about a little lower.

Go to Network and Sharing Center.

Seva choose Wireless Network Management.

You'll see a list of all the networks you've previously connected to. Find the network you need to remember the password for, right-click on it and select Properties.

In the new window, go to the tab Safety, put a tick next to the item Show entered characters and in the field Network Security Key look at our password.

Let's take a quick look at the possible problems you may encounter.

What should I do if there is no “Manage wireless networks” item, or if the password is not displayed after checking the box?

These are very popular problems. There may most likely be no management of wireless networks due to the fact that you do not have Wi-Fi configured on your computer at all (in this case, you definitely won’t be able to view the password this way).Or, I read somewhere that this could be due to the home version of Windows. What to do if there is no "Wireless Network Management"? You can view the password through the router, read about this below, or try doing this:

You will succeed under one condition: you must be connected to the network from which you want to view the password.

If, after checking the “Display entered characters” checkbox, the password does not appear, then try looking at it in the router settings. Or, try from another computer, if possible.

How to find Wi-Fi password in Windows XP? We use the WirelessKeyView program

As I wrote above, XP is a little more complicated. In principle, you can see everything there too, but not as easily as on Windows 7. Therefore, I advise you not to go into this jungle, but to use the free WirelessKeyView program. Which, by the way, works just as well in newer versions of Windows. What does the little program WirelessKeyView do? It displays all the networks to which the computer on which you launched it previously connected. And of course, it displays the saved passwords for these networks.

Everything is very simple. Download the program from the official website http://www.nirsoft.net/utils/wireless_key.html. Open the archive and run the file "WirelessKeyView.exe". The program will open, look for your network there (by name), and in the field Key (Ascii) look at the password for it. It looks like this:

Agree, everything is very simple and clear. Even on Windows 7 and 8, you don’t have to bother with finding the password in the settings. Very good program, thanks to its developers. The only thing is that your antivirus can swear at it. Probably because of its slightly spy purpose.

Where is the Wi-Fi password in the router settings?

Another proven method. If you can set a password in the router settings, you can view it there. And even if it doesn’t work out, you can set a new password. If you were unable to view the key in the computer settings, there is no computer connected via Wi-Fi, and the WirelessKeyView program also failed, then all that remains is the router itself. Well, or reset the settings, but this is a last resort.

Another good thing about this method is that you can even access the settings from your phone or tablet. Provided they are already connected. Just on mobile device I can’t see the password, at least I don’t know how to do it. Although, perhaps there are already some programs for Android (but you will most likely need Root rights there).

I think it’s best to separately show how to view the password on a router from a specific manufacturer. Let's look at the most popular companies.

We look at the key to the Wi-Fi network on Tp-Link

We will start, as usual, with Tp-Link routers. We need to go into settings. Connect to the router via cable or Wi-Fi (which is very unlikely, because you don’t know the password :)). Open the address in the browser 192.168.1.1 (possibly 192.168.0.1) and specify the username and password. The default is admin and admin.

To view the installed key, go to the tab Wireless ( Wireless mode) - Wireless Security. In field Wireless Password a password will be provided.

Remembering the password on Asus routers

Everything is about the same. Let's go to the settings, if you don't know how, then... The address used is the same - 192.168.1.1.

In the settings, right on the main screen there is an item State of the system, the password is indicated there. Just place your cursor in the field "WPA-PSK key". Like this:

By the way, it may still be useful to you.

Finding out a forgotten password on D-Link

I already wrote how to do this in the article: . But I couldn’t help but write about it here, because D-Link is very popular. So we do the same, and go to the tab WiFi - Security Settings. In field "PSK encryption key" you will see the password itself.

We look at the password for ZyXEL

Go to your router settings ZyXEL Keenetic I wrote how to do this. Go to the tab Wi-Fi network(below) and in the field "Network key" you will see the password itself, which is currently set and which you have forgotten.

If you forgot your password on your Tenda router

This means it’s exactly the same on Tenda routers, go to the tab Wireless settings - Wireless Security and in the field "Key" look at the password.

On a Linksys router

Let's take a look at Linksys devices. We do everything according to the scheme: , go to the tab Wireless network - Wireless Security. In field "Passphrase" the password for the Wi-Fi network is specified.

That's all, as you can see, nothing complicated.

What to do if nothing helps?

I think that there is only one way left, this is to reset all the settings and passwords of your router and configure everything again. You can configure it according to the instructions that you will find on our website in the “Setting up a router” section.

I tried to collect on this page all the possible ways in which you can recover a forgotten Wi-Fi password. If something didn’t work out for you, or some points from the article are not very clear, then write about it in the comments, we’ll figure it out. And of course, I will be grateful for new and useful information on this topic.

How to find out the router password or what to do if it is hopelessly forgotten? It's simple! Wi-fi has long and firmly become a part of the lives of many city residents. Many people can no longer imagine visiting a public place, such as a cafe, without the ability to connect to the Internet. Naturally, there is a desire to have wireless access to the network at home. This is very convenient, but there is a possibility of encountering a typical situation that, one way or another, probably everyone faces - you need to connect a new device to the Internet, but you have forgotten the password for the router. Fortunately, this problem can be solved.

Content:

How to find out the password for your Wi-Fi router if you have forgotten it?

To go through the Wi-Fi password recovery procedure, you will need one computer that was previously connected to it.

Right-click on the icon with the connected Wi-Fi in the right, next to the clock, bottom corner of the monitor and select “Network and Sharing Center” from the items that appear.
In the window that appears, you need to select “Wireless Network Management”.
When you see another window that appears, on the required connection you need to right-click again and select “Properties” there.
Inside the "Security" tab, in the column called "Network Security Key" you will find hidden password. To see it, you need to check the box “Display entered characters”, and it will immediately become visible to you.

If there is not a single computer already connected to the network, then you need to find out the password using the router itself.

Connect the router to your computer using the included power cord.
In the address bar of any browser you need to type the following address - . Next, you will need to fill in the fields with your login and password, which will allow you to access the settings. With a high degree of probability, this is admin/admin.
Next, you need to go to the following tabs - Wireless and Wireless Security. In the column called PSK Password: (PSK Password:) you will see your password. Perhaps it will be indicated in some other column in the same section. If you have a router from Asus, then you will see the password immediately on the first page.

Standard router and router passwords

By default, in most cases, the login “admin” and a similar password “admin” will be set on your router. But in some models the situation is different. For example, in the D-Link DI-804 model the password field will need to be left blank with the same login, and in the Zyxel Prestige 650 model the login and password will be the set of numbers “1234”.

By the way, if the above passwords do not work, it means they have already changed them before you, the most popular passwords, try them.

How to reset the password from the router to the standard/factory one?

If you don't remember your router login and password, try entering the factory ones. If they don't fit, you'll have to reset. It's very easy to do. On each router you will find a small button, usually next to the power button, which you need to press with something sharp (since it is very small) and hold for about 10 seconds.
After this, all logins/passwords/settings will be reset to factory settings and you can use your router. But keep in mind that you will have to re-enter all the settings that were made earlier.

We found out the password from Wi-Fi router? Don't forget to take a look and enjoy it for free!

How to change the password of a wifi router?

For this procedure, you need to connect the router to your computer using the cable that comes with it.

Launch your favorite browser and type ;
Type your username and password in the appropriate boxes to begin setting up the router in the appropriate section;
Go to the Wireless section and then - Wireless Security;
Check the WPA/WPA2 box;
Set the following settings: Version should be set to WPA2-PSK, and Encryption should be set to Automatic;
In the column called PSK Password, enter your new (changed) wifi password and click Save;
After the router asks to reboot, click OK;
In the red inscription that appears, click on the blue phrase “click here”, and the process of changing the password will be completed.

3 more useful articles:

The Sidejacking utility is translated from English as “Left Connection” and uses a classic version of the attack called…

WiFi Key Recovery is a reliable program that allows you to remember the password for any wifi network to which…

A typical situation: a user connects one device, for example, a laptop, to a Wi-Fi network, and after some time tries to connect another one, for example, a mobile phone. In this case, the password was conveniently forgotten and not written down. What should I do?

In today's article we will tell you in detail how to find out the password for your Wi-Fi (Wi-Fi) on a computer with different Windows versions. Let's also talk about special programs To view saved Wi-Fi passwords, we will tell you how to view the password on the router and Android mobile phones and tablets.

How to find out the password for your Wi-Fi on your computer

To view the password for your connected Wi-Fi, the condition must be met that the password was saved on the computer at least once. If not, then you should look at the Wi-Fi password on the router.

Find out the password for your Wi-Fi network in Windows 7, 8, 10

In order to find out the password for your Wi-Fi network on a computer or laptop under Windows control 7, 8, 10 perform the following operations:

Open Network and Sharing Center. The easiest way to do this is by clicking the “Start” menu and typing the name of the menu in the search. Also, you can right-click on the network connection icon in the lower right corner or find this menu in the Control Panel.
The window that opens shows basic data about the active Wi-Fi network. Click on the active wireless connection as in the screenshot below.
In the window that opens, open “Wireless Network Properties”.
Go to the “Security” tab and check the “Display entered characters” checkbox. In the field next to you you will see the password for your Wi-Fi.

If for some reason, when you select the “display entered characters” checkbox, the password is not displayed, then try looking at the Wi-Fi password on the router. This is written about in this article just below.

Find out the password for your Wi-Fi network in Windows XP

In the operating room Windows system XP, viewing the password of a saved Wi-Fi network is somewhat more difficult than on more modern OSes, but nevertheless possible.

Open the menu " Start" in the lower left corner of the computer and go to " Control Panel«.

Go to the Wireless Network Wizard menu in Control Panel.

In the Wireless Network Wizard window that opens, click “Next”.

In the next window, select “Add new computers or network devices” and click “Next”.

Select a network installation method. To do this, click “Install a network manually” and click “Next”.

In the final window of the wireless setup wizard Windows network XP click "Print network settings".

As a result of this, you will have Text Document with different settings Wi-Fi connections, including the password. The password line will be called “Network key (WEP/WPA key)”.

Programs for viewing saved Wi-Fi passwords

Let's look at two programs for viewing passwords of saved Wi-Fi networks on a computer.

WiFi Password Decryptor — free program to recover passwords of saved Wi-Fi networks. The program decrypts all types of Wi-Fi passwords for WEP, WPA, WPA2 networks, and also generates all the information into a convenient report in HTML/XML/TEXT/CSV format.

You can download the WiFi Password Decryptor program on the official website of its developer.

After downloading the .zip archive, unpack the contents and run the installation file Setup_WiFiPasswordDecryptor.exe. After that, just launch the program and click on the name of the Wi-Fi network you are interested in to view the password.

A video of WiFi Password Decryptor working is shown below:

WirelessKeyView- small free utility, which displays a list of all Wi-Fi networks ever saved on the computer. The program has an English-language interface, but if necessary, a localization .ini file is published on the developer’s website.

In the screenshot above you can see that the password for the ALESKA Wi-Fi network corresponds to the value 180700.

Video on how to find out the password of your Wi-Fi network via the command line:

How to find out the password for your Wi-Fi on a router

If it is not possible to view the password for your Wi-Fi on your computer, for example, if the data on the computer’s saved networks has been deleted, you can view and, if desired, change the password on the router.

If the computer is not connected to a Wi-Fi network, then you need to connect the computer to the router using a twisted pair patch cord.

After that, type the address 192.168.1.1 into the browser line and click OK. This is one of the most popular IP addresses for logging into a router. If the address is valid, then you will be asked to log in by entering your username and password. Very often the default router password is admin/admin.

If the address 192.168.1.1 or 192.168.1.0 does not work, then you need to find the correct address.

The IP address of the router is often indicated on the back of the device.

You can see the router's IP address in the network connection properties. To do this, open the “Network and Sharing Center” and click on the current connection.

In the window that opens, click “Details”.

We are interested in the “default gateway” line. This value is the router address.

Now that we have successfully found out the router’s address and logged into it, all that remains is to look at the set password for the Wi-Fi network.

Looking at the Wi-Fi password on a TP-Link router

The instructions are written using the TP-LINK TL-WR841N router as an example, but are suitable for any TP-Link routers.

To view the password for the Wi-Fi network, go to the “Wireless” - “Wireless Security” tab in the left menu.

The Wi-Fi password is indicated in the “PSK Password:” line.

We look at the Wi-Fi password on the ASUS router

On ASUS routers, it is very easy to see the password for the Wi-Fi network. After logging in, you are taken to the network status page.

The Wi-Fi password is listed in the right column in the “WPA-PSK Key” line.

Finding out the Wi-Fi password on a D-Link router

Our country traditionally loves routers made by D-Link. Let's look at an example based on the popular D-Link DIR-300 router.

In order to view or change the Wi-Fi password on a D-Link router, go to the “Wi-Fi” - “Security Settings” tab in the vertical menu, as shown in the screenshot below.

In the “PSK encryption key” field, you can see the password for the current Wi-Fi network and, if desired, change it to another one.

See the Wi-Fi password on the ZyXEL router

To view the password on ZyXEL routers, go to the bottom horizontal menu to the "Wi-Fi Network" tab.

On the “Access Point” tab in the “Network Key” field, you can view and, if desired, change the Wi-Fi network password.

Looking at the Wi-Fi password on a Linksys Cisco router

On the LinkSys router, go to the Wireless section in the horizontal menu and then click on Wireless Security.

The password for the Wi-Fi network is indicated in the WPA Shared Key line.

Find out the password for your Wi-Fi network on an Android mobile phone

There are two ways to view the password for a saved Wi-Fi network on an Android phone.

We look at the password through the properties of the access point

Go to settings and connect to the Wi-Fi network for which you want to find out the password.

In the access point settings menu that opens, you can click on the “show characters” icon next to the password field. This way you will see the password saved in your phone.

Unfortunately, if after “password” is empty, it means you have never used your phone at home as an access point, which means the password for the Wi-Fi network was not automatically entered as the password for the access point in this field.

We look at the Wi-Fi password in the Android system files

Mobile phones and tablets on operating system Android store data about saved Wi-Fi networks and passwords in service files. Without root access, these files cannot be accessed, but if you already have root access, then everything is very simple.

The necessary data is stored in a file wpa_supplicant.conf, which is located in the service folder /data/misc/wifi/.

Download and install from Google Play any file manager with superuser rights, for example, RootBrowser.

Launch the program and go to the data folder.

Go to the misc folder.

Open the WiFi folder and the wpa_supplicant.conf file in it.

In the file that opens, the Wi-Fi password will be located in the “psk=password” line.

Video on how to view Wi-Fi password on Android

Wireless network connections have become the norm. Changes in the once established configuration of a Wi-Fi router and connected clients are rare, and the existence of passwords is forgotten. A new gadget appears, but you don’t know what to do in this kind of situation. There is no problem if you forgot your password. Let's take a little time to find out and restore it and regain control of the Wi-Fi network.

Don’t be too upset if your network access password is lost

The device will always remember the password once specified, even if the person setting it up has forgotten it. The statement is true for the router, as well as other network participants in the case when the configuration has not been changed in any way. All you need to know is where the Wi-Fi connection information is stored.

Finding out the network key saved in Windows

The described methods are feasible provided that the computer is connected to the Wi-Fi network of interest at least once.

If you are using Windows 7 or older.
- It is easier to achieve the desired goal using password viewing programs. Launch Wireless Key View and there is no need to do anything else, it will immediately display a list of all current saved information. Two fields have meaning: Network Name and also Key (ASCII). The first contains the name of the network, and the second contains the password to it.
- In the tray (bottom right, next to the clock) there is a network connections icon. Select “Network and Sharing Center” by right-clicking on this icon. In the list of connections, if there is more than one, click “Wireless Network”. Then click on “Wireless Network Properties” - “Security” - “Display entered characters”. Actually, that's it - the password is displayed instead of dots.

If you have Windows XP, then you should do it differently. Click "Start", open "Control Panel" and launch "Wireless Network Wizard". Select “Next” - “Add new computers or devices” - “Next” - “Set up a network manually” - “Next” - “Print network settings”. A text file will open, find the line “Network key (WEP\WPA key)”, it will display the required password. There are no situations where the computer itself “forgets” something.

For smartphone owners

On a smartphone, you can find out the Wi-Fi connection parameters only if you have root rights on Android or by jailbreaking an iPhone. With other option rights, there will be no way to restore anything, since the system will not give permission to read the necessary configuration files.

If your smartphone is based on Android, open the file /data/misc/wifi/wpa_supplicant.conf, for which any text editor will do. It stores network names (SSID) and corresponding passwords (PSK). Recovery utilities also allow you to find out the necessary information, presenting it in a more convenient form. One example is WiFi Key Recovery.
iPhone owners need to install the WiFi Passwords tweak, distributed through the Cydia app store. After restarting Springboard and running the utility, you will receive the Wi-Fi keys you are interested in.

Looking at the router settings

You will have to look into the router configuration if you want to find out the password, but nothing is saved on the computer. You will need a network cable, if you don’t have one, buy it at any store. Insert one end of the wire into the PC’s network card, the other into any free port of the router, then in any browser enter the router’s IP address in the same place where you enter website addresses. You can find out the IP by looking at the connection properties. To do this, you need to do this: press Windows + R on your keyboard at the same time, the “Run” window will open, enter ncpa.cpl and press OK, network connections will be displayed. Right-click the desired “Local Area Connection”, click “Status”, then “Details”. The lines “DHCP server IPv4” and “DHCP server IPv4” contain the IP of interest.

You entered the address in the browser, in the request that appears, specify the credentials for the router. The appearance and layout of control panels vary depending on the manufacturer, but the general recommendation for what to do is this: look for the sections responsible for setting up the wireless network. The most commonly used name is Wireless, where there is a Security subsection. You should be interested in lines containing the words Password or Key, this will be the information you are looking for. Seeing several asterisks instead of symbols, most likely, next to this line you will find a Show password button. As a last resort, come up with a new one.

A password is required to prevent unauthorized access to the Internet. It may be needed when connecting a new device to the router: a tablet, mobile phone or another computer. In any case, at least one device from the network is already working, which means it is possible to find your access code.

The situation when a user has forgotten his Wi-Fi password happens quite often. There are several simple ways to restore access to your wireless network. If at least one device is connected to it, for example, a computer or mobile phone, then it can be recognized within a minute. Otherwise, you need to connect to the router's web interface.

Solving the problem of what to do if you forgot your Wi-Fi password

One of the drastic ways to restore access to the network is to reset the modem to factory settings. On the back of the router there is a “Reset” microswitch, which must be pressed with a knitting needle or a paper clip and held for 10-15 seconds. After this, you should set up a new password again. To change the modem, you need to go to the settings section and in the “Tabs” click on the “Access Control” item. Next, click on the “Passwords” line, which, when expanded, will prompt you to enter the old and new passwords. To save the settings, you need to confirm your intention (Save/Apply).
To avoid red tape, it is easier to find out your wireless network access code using the Internet distributor's web interface. This resource will be available by entering the router’s network address (192.168.0.1 or 192.168.1.1) in the browser and logging into the web interface using your password and login. If the factory settings have not been changed after purchase, the login and password will look like admin-admin or admin-0000, or admin-1234. After opening the page, you should enter the "Wireless Security" section, which is responsible for security. If the password has been changed and forgotten, you will have to configure everything all over again.
Recovering your Wi-Fi password using a computer. If a computer is also connected to Wi-Fi, then it knows exactly the forgotten password. The method works provided that the software for 64-bit Windows 7 or Windows Vista is installed on the PC. In the "Network and Sharing Center", which is located in the "Control Panel", you need to open the "Manage wireless networks" section. The list that opens will contain the name of your network. It opens with one right click of the mouse. In "Properties" there will be a "Security" item, in which there is a line "Display entered characters." If you check the box next to it, the forgotten password will appear on the screen.
WirelessKeyView Program To recover a forgotten password, you can use the small WirelessKeyView program. It is completely free, does not require installation and takes up little space. With its help, all saved passwords on the computer are displayed in the form of a list. It opens only when downloaded with administrator rights. The forgotten access code will appear in the Key (Ascii) column that opens. If the router uses filtering by poppy addresses, then the user will not succeed.

13 February 2015 16:13

In this article, we’ll look at how you can recover a WiFi password that you forgot using your mobile phone or tablet.
You can imagine a typical situation: you connected to WiFi somewhere, say in a cafe or at a neighbor’s. That is, they accidentally found out the password and connected to the Internet using their phone. After some time, you needed to connect another device to this WiFi, for example, another phone or laptop, but, naturally, you forgot the password. How can I restore it to connect your device to this network?
The first thing you want to do is log into the system, go to the WiFi settings and try to find this password among your connection configurations. However, we have to disappoint you, the password is not stored here. How can you fish him out?

The easiest way

If you have an iPhone and need to transfer the password to another device

You should follow similar steps if you want to connect access to your iPhone from another phone running Adroid. If, on the contrary, you are connected to WiFi via an iPhone and want to transfer the password to another device, then it will be a little more complicated. The thing is that on the iPhone there is no such feature as transmitting a password via a QR code.
To do this, you need to download another application called Crafter. In its free version, it only allows you to scan documents; in the paid version, we can also create your own documents. To create a QR code from WiFi (the program has such an option - the “WiFi Network” item), you will need to buy paid version, which currently costs 99 rubles. After this, it will also be possible to generate a QR code, which will then appear on the screen and which can be read by another phone (running an Android phone on WiFi networks. It looks like this:

SSID: - here is the name of the network.
Psk: password here
Key MGMT: encryption type.

We have described simple ways to recover a forgotten WiFi password.