Zyxel keenetic extra ii routing setup. ZyXEL Keenetic Extra: simple and advanced Wi-Fi router setup

Router broadcast power Zyxel Keenetic Extra will satisfy the majority of people living in apartments and houses with a small living space. Good functionality and numerous features of the device are more than sufficient for home use.

Support for dual-band mode allows you to comfortably use high-speed Internet in apartment buildings, even in the presence of a lot of interference emitted by neighboring wireless points. The manufacturer also equipped the Extra model with gigabit ports and USB port support.

The box and its contents

The ZyXEL company traditionally printed an overview of the main characteristics of the device on the Keenetic Extra packaging, which distinguishes it from competitors in the same price range. It should be noted that the entire description is in Russian, so the buyer will not have to guess what he will receive after purchasing the device.

The manufacturer carefully packed everything needed for a quick commissioning of the equipment.

The list of equipment consists of the following items:

  1. The Zyxel Keenetic Extra device itself;
  2. patch cord;
  3. Adapter for connection to the mains 220 V;
  4. Instructions and warranty card.

Appearance

The Ziksel company reacted conservatively to the appearance of the router in question. The shape of the glossy body and its black color emphasize the practicality of the equipment. The front panel is decorated with nine light indicators of operating modes.

Also, the front panel has a key that the owner of the router can configure at his discretion. On the side of the device, in addition to ventilation holes, the user will find a full-fledged USB connector. One WAN and 4 LAN sockets, as usual, are located on the back, and there is also a place for a round hole for connecting the power adapter and the following three buttons: "On / Off", "Fn" and "Resert". The functionality of the "Fn" key, the user has the opportunity to independently configure at his discretion.

Reliable mounting on the wall in any position is designed to provide a pair of front legs, and when installed on a horizontal surface, the rear polymer legs will not allow the device to slide.

hardware design

As a rule, kinetics are equipped with a good set functionality. Zyxel Keenetic Extra was no exception. In addition to the main function of broadcasting Wifi in 2 bands - 2.4 and 5 GHz, the device has support for USB routers of mobile operators, DLNA and torrent. The disadvantages include the only USB port, since this is no longer enough for a significant number of users.

A powerful processor operating at a frequency of 580 MHz and RAM (128 Mb), sufficient to solve most of the tasks at home, will allow you to comfortably operate the device without frequent freezes. 16 Mb of built-in memory easily accommodates all the necessary software.

Four gigabit LANs provide high-speed operation of home network computers, and a gigabit WAN connector is responsible for connecting to the World Wide Web, which will allow you to fully use the capabilities of your Internet provider.

Unfortunately, the manufacturer has equipped the router with non-removable external antennas, so purchasing them with a higher gain for owners of large apartments is a useless undertaking (unless with the appropriate skills to use a soldering iron).

When using the Keenetic Plus DECT external unit, the router supports telephony, but it is not in the standard box, and if necessary, you will have to pay extra for this USB module. You can connect an external drive or printer to USB 2.0, and you can print documents from any device connected to the wireless network created by the router.

The security of the created network is ensured by SPI technology, Wi-Fi encryption via WPA2-PSK and a firewall. A convenient parental control option will appeal to families with minor children. Experienced users highly appreciate the presence of a control mode through the command line.

Software

Entering the settings through a computer is done by typing "192.168.1.1" in the search field of the browser. Next, in the menu that appears, type the access code of the owner of the router.

The view of the program for entering settings and network parameters is similar to other models of kinetics.

The NDMS v2 firmware used has several connection methods with channel availability analysis, as well as through USB devices of all mobile operators in the Russian Federation.

Efficient traffic filtering has been implemented with the ability to deny access to resources marked "for adults".

In order to adjust the parameters of the Wi-Fi network, you need to go to the appropriate section and fill in the columns in the "Access Point" tabs for both wireless network frequency bands.

The rest of the tabs are used to configure guest connections. All graphs have hints, so the entire procedure for entering parameters is usually not difficult.

Smartphone setup

The absence of a computer at home is not a problem for owners of Zyxel Keenetic Extra, as several convenient programs have been developed specifically for smartphones.

ZyXEL Keenetic NetFriend

It's a way out for smart phone users, but without a PC.

In addition to entering the settings parameters, using the utility, you can easily analyze the Wi-Fi connection, as well as upgrade the firmware.

ZyXEL My.Keenetic

This program has an even more extended list of tools. It can remotely log into the router interface and control devices on the wireless network.

The main advantages of the model

Many users leave positive feedback about the high speed of gigabit ports and the ability to broadcast at a frequency of 5 GHz. The web interface has everything you need to manage numerous modules.

Main disadvantage

Insufficient power of external antennas, which cannot be changed, so the device copes well with its tasks only in two-room apartments, sometimes in three-room apartments, if there are no thick interior partitions. The only USB port can also be attributed to the minus, since this is no longer enough for a significant number of users.

Conclusion

Rich functionality and good hardware allows you to create an uninterrupted home Wi-Fi network. But if you need a router for installation in a small office or a large apartment, then it is not recommended to purchase a device.

If you have just entered into an agreement with one of the Internet providers and purchased everything you need (router, cable), you may want to install and configure network access yourself, without additional expenses for technical specialists. Therefore, you have landed on this page and therefore you will succeed.

This article will discuss in detail the process of independently connecting the Internet via an Ethernet cable to a Zyxel Keenetic ii router for various providers and data transfer protocols (PPPoE, L2TP, PPTP).

How to start the router?

Carefully remove all components of the device from the package and follow the following algorithm when connecting it:

  • Unpack and connect the power supply to the device;
  • Insert the cable from the provider (the one through which Ethernet data is transmitted) into the WAN port allocated among all;
  • Take it out of the package and connect the connecting cable to the router, as well as to the network card of the main PC: it is quite short, the same at both ends, it is inserted into any of the five free connectors of the router and the only one available on the computer / laptop;
  • Plug in the power supply, then press the power button on the back panel;
  • Wait until the device starts up completely, as a result of which 3 diodes will light up on the indicator panel: power, network, connection to a PC.

The new connection should now appear in the lower right corner of your PC screen. Let's do some preparatory work:

  • Right-click on this icon, open the Control Center;
  • In the right part of the window that opens, the name of your connection will be located, highlighted in blue. Click on it;
  • Another window opened. Open the properties by clicking on the corresponding button;
  • Scroll down the list of parameters for the current connection and find the Internet protocol version 4: select it and open the properties (the button below the list);
  • Make sure both IP and DNS are set to get settings automatically. If this is not the case, set the selectors to the appropriate value;
  • Apply the changes.

This completes the preparatory work. Let's move on to the main settings.

Connection setup

When configuring the Zyxel Keenetic ii router, we will use the web configurator common to the entire Kinetic family. Therefore, by learning how to set up this model, you will be able to cope with connecting devices of the third and third generation and other types like Lite, 4G, etc.

And so, for starters, we need to open this same web configurator:

And now you are in the main menu of the device. In it you can find information about the current firmware (top list on the right), connected connections (top left), as well as two types of menus: text on top and bottom, consisting mainly of graphic icons. We are interested in the second - "Internet".

But before proceeding to enter the parameters, find the provider in the contract or get the following data from the support service:

  • What access protocol is used: we have already listed the most popular ones above (PPPoE, L2TP);
  • Data for authorization (personal login and password - contained in the contract);
  • Whether it is necessary to specify the IP address, as well as the name of the dedicated server (VPN). These values, if required;
  • Are you assigned a static address, or is it updated in each new session (dynamic);
  • Does the provider register MAC addresses (for example, Dom.ru does this) and, if so, which one belongs to you;

We need all this to connect the Zyxel Keenetic ii router to the network.

After switching to the Internet tab of the main menu, you will see an updated list of tabs at the top of the page. Go to the PPPoE/VPN section and click the add connection button. In the window that opens, make the following settings:

An example of setting up a router in PPPoE mode

  • We set the checkboxes in the first two selectors, which will enable the connection and designate it as the main one for accessing the external network;
  • In the protocol field, enter the one that the provider told you. For example, PPPoE;
  • If the supplier reported that this is necessary, indicate the server address;
  • Immediately after it, we indicate our personal data as a user;
  • We set the protection method (i.e. authentication) only at the request of the Internet provider;
  • Below, if you are supplied with a dynamic IP, we do not change anything. And if it is static, then we select manual configuration of the parameters and prescribe the appropriate values ​​​​of the address, subnet mask and gateway used (Some providers do not supply an ip address at all on the client wan port. In this case, you must select the option "Without IP address");
  • All other parameters are optional for owners of the Zyxel Keenetic ii router and are assigned only at the request of Rostelecom, Beeline or any other company with which you have entered into an agreement;
  • Click on apply settings and wait for changes to be made to the router configuration;

An example of setting up a router in PPTP mode

If the supply agreement provides for a static IP, and you failed to set up a connection according to the algorithm above, try the following additionally:

  • Being in the same "Internet" section of the Zyxel Keenetic ii router, open the IPoE tab of the top menu;
  • Click on the name of the only interface listed in the table;
  • In the pop-up window, we also tick the top two selectors;
  • We find the line of IP parameters and select the manual configuration method;
  • In the fields that appear, enter the data from the provider;
  • If addresses of domain servers were provided, we indicate them below;
  • Here you can also specify the static MAC address assigned to you by the provider. To do this, remove the "Default" setting in the corresponding field;
  • Apply the changes and check the availability of the Internet again.

Example manual setting ip addresses

For reliability, you can restart the Zyxel Keenetic ii and turn off, then (after 15 seconds) turn on the network adapter of the PC you are using.

If the router is not new, and the setup was carried out earlier for other providers, you need to reset the settings to the factory settings. To do this, you need to find the Reset button on the back of the device and hold it down for 10-15 seconds, after which the router will reboot. In this case, the login password (1234) and other parameters will become initial. Now you can set up again and continue to use a high-quality Internet connection using the Zyxel Keenetic ii router.

Found a typo? Select the text and press Ctrl + Enter

Today in the article we will talk about the updated Wi Fi router Keenetic Extra KN 1710 router. This configuration is characterized by the presence of additional Wi-Fi amplifiers and USB connectors for interfacing with 4G modems or file storages. Such technical characteristics of the device make it possible to install it not only in apartment buildings and offices, but also in the private sector, country houses, where the number of network cables is limited.

WiFi router Keenetiс is implemented in a cardboard box with a laconic design, which contains all the information about technical specifications devices with key features. The package is standard - a router, a power supply, a patch cord (network cable), an instruction manual and a warranty card.

Appearance

This device belongs to an updated line, separated into a separate brand. Thanks to this, the router has improved design features, more changes have been made to appearance. The design is technological and discreet, light gray and white colors predominate in the case.

On the cover there is a control panel with several LED indicators, and markings are also applied there. On the right side of the case, there is a multifunctional key, which turns on Wi-Fi and activates the WPS connection with one click. In the web interface, in the relevant sections, you can configure its action.

The left side of the case is equipped with a full-size USB connector, if you wish, you can connect a modem, external drive, USB flash drive or cable from the printer to it.

Not far from this connector is the FN button, which by default allows you to safe mode eject connected devices.

The Keenetic Extra KN 1710 router is equipped with 4 LAN ports and 1 WAN port. To connect to the Internet via a network cable, you can use any port or even several.

The design is equipped with 4 fixed antennas, each amplified by 5 dBi. Thanks to the hinged mounting, the antennas are able to change the angle of inclination relative to the mounting point.

On the bottom of the case there is a sticker with the MAC address, serial number, Wi-Fi network data and a QR code for quick connection. Using a special mount, the device can be installed not only on horizontal surfaces, but also attached to the wall.

Filling

Reviews of the Keenetic Zyxel Extra KN 1710 router showed that the model is equipped with a MediaTek MT7628AN processor with a clock frequency of 580 MHz. The amount of DDR2-memory is 128 MB, and internal 32 MB. The device operates in two bands: 2.4 GHz with speeds up to 300 Mbps and 5 GHz with a maximum speed of up to 867 Mbps. All network connectors with a speed of no more than 100 Mbps.

Smartphone software

The Keenetic Extra Wi-Fi router is able to interact with the My.Keneetic application for Android and iOS mobile platforms. On the main screen mobile application a list of available routers to manage is displayed.

In the control window, the list contains devices located in local network. Information about the activity of data exchange is also displayed here. The application itself allows you to make an initial connection to a local provider. In the appropriate sections, you must enter the parameters of the wireless and wired networks.

The application interface has a separate tab for managing and viewing connected drives to the router.

Control Panel

The web interface of the device has been updated. Users noted that it has become much clearer, more convenient and more functional. Directly management is fully consistent with modern standards.

The start page displays network usage activity, as well as a list of connected drives, general data, network port activity, and more.

In the "Wi-Fi Clients" section, you can see the list of connected devices. If you want to restrict access.

The "Home Network" tab specifies information about the main wireless network in two bands. The device supports seamless roaming.

Setting up Internet access

Setting up a router is not difficult and it is not necessary to have experience. The main thing is to strictly follow the instructions.

First of all, you need to go to the web interface of the router and make the basic settings.

note: manufacturers of this company call routers routers.

To enter the settings, you need to open any browser installed on your PC and enter the combination - 192.168.1.1 in the address bar. To switch on the keyboard, press Enter. The first thing the router will ask is to change the administrator password. Depending on the settings, the browser may offer to save it.

To set up Internet access, you need to select the Internet icon on the desktop. It is located in the lower right corner.

In the web interface, click on Broadband connections. The configurator will automatically redirect the user to the Ethernet connection settings page.

To enter Personal Area you need to know the username and password for identification in the system. If the user has forgotten it and there is no way to restore it, you need to update the MAC address by clicking on the button with the same name. Finally, click on the "Apply" button.

Setting up Internet access is now complete.

WiFi setup

For settings wireless connection you need to set the following parameters on the router in the Wi-Fi network section:

  • Enable hotspot.
  • The network name (SSID) can be written in any Latin letters (it is important that the access points for 2.4 GHz and 5 GHz are different).
  • WPA2-PSK network security.
  • Network key - the set password for Wi-Fi.

For all changes to take effect, you must save them by clicking on the "Apply" button.

This completes the router setup. For the device to work correctly, the router must be rebooted.

Setting up a router for DC++

For the correct and uninterrupted operation of the file-sharing network, you need to make the following settings:

  1. Assign a range of IP addresses to a specific PC. This is required for port forwarding to work correctly. The peculiarity of the system is that the PC must be able to receive incoming data from the outside. For this reason, Port Forwarding is just used. In order for the IP addresses to remain unchanged, you need to additionally configure Static DHCP.
  2. Configure the redirection of the incoming data flow to the corresponding IP addresses (set in the previous paragraph).

To reserve specific addresses on your home network, open the Home Network tab and select Networking. The Leased IP address pop-up window will display the MAC and IP addresses of all connected computers. It is necessary to select those that need to be assigned to the corresponding MAC addresses. To save the change, click the "Commit" button.

note: reserved addresses must be remembered, they will be needed for port forwarding.

Configuring Port Forwarding

When setting up port forwarding, you need to open the "Home Network" menu and go to the "Servers" section. Further, the algorithm of actions is as follows:

  1. In the pop-up window, check the box next to the item "open access to home network services" (in some versions, the item may be called - Enable port forwarding).
  2. To save the changes, click the "Apply" button.
  1. In the "Service" section, select an empty line or "Other".
  2. In the column "IP address of the computer" indicate the one that was reserved earlier.
  3. In the "Protocol" tab, make TCP and UDP active.
  4. In the "Port range" section, enter the number 4000.
  5. Also enter 4000 in the "To" field.
  6. In the Description tab, enter DC++.

Finally, be sure to click the "Add" button.

note: If you plan to use DC++ on multiple computers, you must follow the same steps.

WiFi router Keenetiс Extra KN 1710 are the latest generation routers, which are characterized by high functionality, stability and long service life. It is recommended to purchase the device in large chain stores or from official representatives.

Excellent catches, no glitches, etc. I measured the speed through wifi - 82 megabits download and return above 70! Internet optics 100Mbit.

Minuses

Didn't find

Review

I was looking for a router in a store - several departments, the total area seems to be more than 200 sqm. The walls are brick. Internal - Sibit and brick. It stands in the grocery store on the refrigerator - on the right in the office room, through a thick wall, it catches all lanes! On the left is a hardware store - it also catches on all lanes! Only my brother has it at the very end of the construction store, and even through a metal showcase, if the door is open - 1-2, and if it is closed - it’s already bad, but the room is like a bunker. There I had to pull a wire to a network of computers, since I initially counted on a wired connection. And in the grocery store, the online checkout works great. So it exceeded my expectations! Why did I choose Zyxel? Because this company has been producing modems for a very long time ... Zyxel took a cousin to an apartment - it catches perfectly and has been working for a couple of years without interruption. I also read the reviews - mostly positive. Mikrotik is offered everywhere in the office - it costs several times more. TP Link offered - refused, painfully buggy. And so in my Khrushchev apartment, the ancient D-Link catches very weakly in the edges. But for more than 5 years, dir 620 has been working.

Hello dear friends. Artyom is with you as always.

What are the basic requirements for building wireless networks using a Wi-Fi router?

This is stable operation without frequent reboots, wide wireless signal coverage, support for the 5 GHz 802.11ac band and a clear management interface.

Zyxel Keenetic Extra 2 has all this and even more.

The device comes in a small box that lists all the main features of the Zyxel router.

The device is based on the MT7628N 580 MHz chip with 128 MB of DDR2 RAM.

4 5dBi antennas provide a strong Wi-Fi signal.

The speed of the Wi-Fi 802.11n 2.4 GHz wireless network is 300 Mbps.

The speed of the Wi-Fi 802.11ac 5 GHz wireless network is 867 Mbps.

Wired ports have a speed of 100 Mbps.

There is a USB port that supports the installation of additional devices.

3G/4G LTE modems, USB drives, printers, DECT phones.

If you need to use an Internet connection using ADSL technology, then this is not a problem either.

You can buy Keenetic Plus DSL ADSL2+/VDSL modem and use your regular Zyxel router to connect!

In addition, there is support for FTP / DLNA / CIFS / SMB protocols on board, as well as a Transmission torrent client.

Thus, a USB drive can act as a shared network resource, with a data exchange rate of up to 12 MB / s.

In the box, in addition to the Internet center itself, you will find instructions in Russian, a power supply and a patch cord.

The router itself is very compact and will not take up much space on your desk. Body length about 17 cm.

The top of the case is made of matte white plastic, which has a pleasant roughness. Such plastic does not collect fingerprints and dust.

There is also a number of indicating LEDs, they are small and do not hit the eyes with light.

A little to the right is the function key, with the Wi-Fi icon. By default, the key can start WPS pairing with other wireless devices.

Its functions can be reassigned in the web interface.

P. S. By the way, many functions of the Zyxel internet center can be controlled from a smartphone through the My.Keenetic application.

On the front side is the Zyxel logo.

The sides of the device are perforated to dissipate heat from internal electronic components.

P. S. During operation, the device heats up quite a bit.

On the left side is a multifunctional USB port, next to it is the FN key.

By default, pressing this key once will safely disconnect the USB drive from the Zyxel Keenetic Extra 2.

After that, it (the disk) can be physically removed from the USB port. The functions of the FN key can be reassigned in the web interface.

There are five 100 Mbit ports on the back wall. One WAN and four LAN ports.

P. S. It supports the ability to connect two providers at the same time. When one ISP goes down, the other will automatically turn on.

All four antennas are non-removable and can rotate up to 180 degrees and drop sideways, from 90 to 0 degrees.

At the bottom of the case are rubber feet and holes for wall mounting.

The design turned out excellent and the device will fit into any interior.

Now the tests.

First, I checked the wired internet speed.

I have a 50 megabit tariff connected.

With this task, Zyxel Keenetic Extra 2 does an excellent job, giving out the full speed of my tariff plan.

57 Mbps for download and 94 Mbps for upload.

The presence of four antennas really does its job, the level of the wireless signal is consistently high.

At a distance of more than 10 meters, more than 60 Mbit / s is available for receiving and transmitting data.

P.S. Despite my tariff of 50 Mbps, the actual transfer rate is very often higher. The specifics of my provider.

So you will not have problems with building a wireless network at home. You can confidently play any media content over the air, without brakes and friezes.

In order to check the speed of work on the local network, I connected to USB port internet center drive, Seagate GoFlex 500 GB.

After that, the disk will be displayed on your local network as a shared resource. The data transfer rate is 10 Mbps, which almost completely loads a 100 Mbps data channel (a 100 Mbps network can transfer up to 12 Mbps).

So, if you use the Transmission torrent client built into the router, it will fully reveal the speed of the Internet tariff plan of 100 Mbps.

Now let's look at the firmwareZyxel Keenetic Extra 2.

The device has a lot of useful options and features, and they correspond to more expensive Internet centers from Zyxel.

P.S. Reviews of other devices:

To go to the web interface, type in the address bar of the browser my.keenetic.net

Consider the main features and chips.

– On the System Monitor page In chapter "System" contains the main statistical information about the connection, its type, the status of wireless points at 2.4 and 5 GHz.

Here you can see all connected USB devices.

All cables connected to the Zyxel Keenetic Extra 2 are visually displayed as a picture. If suddenly something happened to the cable, then you will immediately see it.

Sections "Routes" and "Connections" the actual routes and connections are displayed accordingly.

The list of wireless Wi-Fi clients is displayed in the corresponding section.

« USB-devices" contain a list of connected USB drives: modems and network printers.

USB storage can be managed in the section "Accumulators".

If you are using a special USB module to connect via ADSL, then the section « USB DSL» .

– Next page “Internet”.

In chapter "Connections" you can see all connections to the Internet and to other networks, as well as prioritize between connections.

The function will be very useful when you use two providers. You can also configure the system to “ping” two Internet providers and, in the event of a network break, at one provider, automatically switch the channel to the backup provider.

This function is configured in the section « Ping Check» .

All other options are responsible for connections via IPoE/PPPoE/VPN protocols.

Also supported is 802.1x and the KABINET provider.

The 3G / 4G wireless protocols and connection to Internet providers via the “wireless” WISP 2.4 and 5 GHz are not forgotten either.

« USB DSL» is responsible for the choice of DSL technology, if you use it. You can set ADSL2/2+ or VDSL.

If you have a white IP address, you can connect to your Zyxel router remotely via the Internet.

If there is no white IP, then it does not matter, there are other options for connecting from outside. I will show these additional options a little later.

Chapter "Other" is responsible for DNS servers, static routes and PPPoE connections passing.

- On the page "Home network" You can view the list of devices connected to the network. The network can be divided into segments, and to use an external DHCP server, go to the section « DHCP Ready» .

IGMP Proxy responsible for setting up IP television.

– Network PageWi- fi» displays the parameters of 2.4 and 5 GHz wireless networks. Everything from the network key, security type and Wi-Fi standard, is configured here.

If you want to control wireless network connections by checking MAC addresses, then there are no problems here either.

– Security Page Allows you to configure port and address forwarding rules.

Here you can also manage the firewall settings, as well as services SkyDNS and Yandex.DNS.

These services will be able to filter out unwanted and dangerous traffic.

P. S. For example, you can easily restrict access to dangerous resources for your children when they are actively using the Internet.

- System page.

In chapter "Options" you can configure the paging file if suddenly there are not enough system resources to work with all running services.

A little lower is the button for the usual reboot of the router, and then the button for resetting the default settings.

It's very convenient that you can only install the components of the Zyxel firmware that you really need.

All installed components, as well as updates, are located in the tab of the same name "Update".

To see a list of all components, just click on the button "Show Components".

tab "Mode" will help you choose one of the four modes of operation of Zyxel Keenetic Extra 2 - Internet center, adapter, Wi-Fi signal amplifier and access point.

To reassign the actions of the function buttons on the router case, go to the section "Buttons".

If you want to disconnect the wired and wireless network, then you can set a schedule convenient for you, in the section "Schedules".

- The last page "Applications" is responsible for the network services of the router. DLNA, FTP, torrent client, Windows network.

The shared folder of the USB drive is just created in the section "NetWindows» .

To allow remote control, via smartphone, go to the section "Cloud service".

If you do not have a so-called white IP address, to access the router settings via the Internet, then the section will help you « KeenDNS» .

How do you see, Zyxel firmware Keenetic Extra 2 is very easy to manage and provides many features, at the level of more expensive Internet centers from Zyxel.

All tabs open instantly, no long downloads in rendering the interface.

As a result, we get a stable operation of the device, a confident Wi-Fi signal with two bands of 2.4 and 5 GHz.

Through USB, you can connect a disk / flash drive / USB printer / ADSL module, as well as a 4G LTE modem.

If you need to deploy DECT telephony, then there is such an opportunity too.

And all this at a cost of about 3,600 rubles.

Video version of the review:

For the combination of these characteristics Zyxel Keenetic Extra 2 receives a well-deserved award from the site

If you liked the video and article, then share them with your friends on social networks.

The more readers and viewers I have, the more motivation to create new and interesting content :)

Also, do not forget to join the Vkontakte group and subscribe to the YouTube channel.

mob_info