Zyxel keenetic 4g iii Internet filtering settings. Internet connection

Equipment manufacturer ZyXEL uses Yota operator. In the line of routers, Keenetic 4G III is a device specifically designed to connect to 3G / 4G networks. It combines the possibilities of collective access to high-speed Internet, obtained both via FTTx cable lines and by connecting external USB modems. Supported by iptv. Setting up a router ZyXEL Keenetic The 4G III for Yota takes this versatility into account.

To connect the router, there are connectors and buttons on its surface. On the rear panel there is a socket into which a 12V 1A DC plug is inserted. Nearby is the power button. 4 RJ-45 connectors (LAN1-LAN4) "Home network" are used to connect wired network subscribers via Ethernet cable. Another 1 RJ-45 (WAN) "Internet" connector is used to receive the services of a provider - Internet via cable.

There is a USB connector on the left side of the product. It supports 3G/4G modems. Nearby there is a "Reset" button to reboot the router and return the current settings to the basic values. A wireless control button is available on the top surface Wi-Fi network. Its action is determined by the settings available in the router interface. By default, the duration of the press determines whether the WPS mode and Wi-Fi network are enabled/disabled.

Preparing to connect ZyXEL Keenetic 4G

For the network to be created to work correctly, you must first configure the network card of the computer or laptop that is used to configure the router (router). It is necessary to connect the router with a cable from any connector of the LAN group of the home network to the PC network card.

In the right corner of the PC taskbar, you need to click on the Internet connection symbol and go to the "Network and Sharing Center". After selecting the "Change adapter settings" item, you go to the network connections page.

It is necessary to select the PC used and right-click to open its context menu. In it you need to select "Properties" and in a new window find the Internet Protocol version 4 (TCP / IPv4). In its "Properties" tab, check the "check box" for obtaining an IP address and DNS server address in automatic mode and click "OK". After that, the network card setup is completed.

Configuration via the installation wizard

The manufacturer of the router recommends that you first reset the settings to factory defaults. This is done by pressing and holding the "Reset" button (recessed) for at least 10 seconds. After that, the reset cycle starts, which can be observed by the on and off indicators on the front panel. It will end in 30-40 seconds.

On a PC, you need to enter 192.168.1.1 into the address bar of the browser you are using and press "Enter" on the keyboard. In the authorization window that appears, fill in the fields, specifying the values ​​admin/admin (1234). After entering the "Enter" command, the start page of the router interface will open. It has "Quick Setup" and "Web Configurator" prompts at the bottom. After selecting the "Quick Setup" tab, the installation wizard starts and the Internet connection is quickly configured.

On the pages of the wizard, you must select the country of use, region, provider. After selecting the operator, a window will open in which you need to write down the username and password from the contract concluded with him. If there is no provider in the proposed list, check the box "My provider is not in the list" and "Continue".

Whether or not there is a binding to the MAC address, you need to ask the operator. If it exists, then the item should be ticked and after going to the next page, enter the physical address of the router. If there is no binding, then the item "My provider does not register MAC addresses" is checked.

After that, you will be prompted to update the firmware of the device. The update is done automatically after clicking on the tab. On the next page, the issue of enabling the Yandex DNS secure Internet service is resolved. After making a decision and continuing, you go to the final page of the installation wizard with basic Internet settings. At the bottom of it are the tabs "Log in to the Internet" and "Web configurator". By clicking on the first of them, you can view the pages of the browser.

How to set up a ZyXEL Keenetic 4G router for Yota: step-by-step setting of parameters for a provider

After clicking on the "Web configurator" tab, the router offers to change the Keenetic administrator's password. After recording, confirming and applying it, an authorization tab will open, on which you need to enter the username - admin and a new invented administrator password in the field. Clicking on "Login" takes you to the main page of the system monitor.

The tabs at the top of the page refer to the currently pressed icon in the bottom field of the interface. The "System" tab of the main page displays information about the current Internet connection, information about the system and updates, the status of the Wi-Fi access point, the USB modem connection and its name, the status of the LAN and WAN network connectors.

When you click on the "Internet" icon (globe), tabs for the type of connection protocol will become available. You must choose the one specified in the contract. After clicking on the desired tab, a window will open with the suggestion "Add connection". Clicking on it will take you to the connection settings page. It must indicate all the data of the contract, if the operator provided them. The l2tp Internet access protocol uses Beeline. Rostelecom, Megafon in different regions use different types of connection.

After clicking on the "Apply" stencil, the Internet will become available. This can be verified by the indicator on the front panel of the router. When the provider cable is disconnected from the WAN connector, the indicator will turn off. The connection will be lost on the "System" and "Internet" pages. When a modem is connected to the ZyXEL Keenetic 4G III USB connector, Yota USB modem configuration is not required. The router will detect it, and the mobile Internet will automatically connect. Information about this will appear on the pages of the router interface. The indicator will light up again.

The router supports the Internet with more than 70 modems. For many of them (including Yota) there are universal firmware.

By default, Wi-Fi is configured on the router. The network name and password for access to it are indicated on the label of the device. For manual setting click on the icon in the web interface wireless network and select the "Access Point" tab. In it, you can change the already existing network name and come up with an individual password that you need to remember. The rest of the security protection settings can be left unchanged. The entered data should be saved by clicking on the "Apply" stencil. The front panel LED will show the status of the wireless network.

What to do if the router does not see the USB modem

First you need to make sure that the 3G / 4G modem receives mobile Internet when it is connected to the USB connector of a computer or laptop. If paired with a computer, the modem works without comment, but the router does not see the modem, then you need to make sure that there are no errors when configuring the router. To do this, you need to reset its settings to factory defaults.

If Yota falls off the Internet through a ZyXEL router, then the modem settings may not be compatible with the router. You can find out about this on the my.keenetic.net website in the "Support" section, having previously received information about the full designation of the router model. Here you can find the optimal driver versions and the latest firmware. Installing the USB application allows you to control the necessary positive balance of the card.

In the event of a malfunction after a period of normal operation (the ZyXEL router stopped working, it does not see the Yota modem), it is necessary to update the router firmware. Its latest version needs to be downloaded and saved as a file on your computer. In the "System" section, select the "Files" tab and open the Firmware. It requires you to replace the existing value with a new one saved on the computer. The process ends with a reboot of the router. If all these actions did not help, then the question is about replacing the modem or router.

Despite all the perfection used today information technologies, there are times when it is impossible to hold a dedicated Internet line into the room, or it is too expensive. In such situations, wireless 3G and 4G modems of those operators whose coverage is available in the area come to the rescue. But what if you need to connect several devices to the Internet at the same time? The answer is simple - purchase and install 4G wifi router Zyxel Keenetic 3 (III) models, for example.

This is a simple and concise solution that requires only a few preliminary settings, which you will learn about in this material.

The Ziksel company is well known in the IT environment for the quality and uninterrupted operation of the devices it produces, and the Kinetic iii router is no exception. This router is specially designed to work with mobile USB modems. But still, on its rear panel you will find the usual slot for installing a LAN cable and 5 additional ports for wired connection to a PC. As well as a USB port on the side and a front status indicator bezel. This is what we need to set up an Internet connection. So, how do you go online?

Preliminary work

First things first, you need to unpack and connect the 4G router to the network. There is nothing complicated in this: we connect the power cord to the connector on the rear panel, turn it on (electrical), insert the modem into the port on the side, connect the computer to the router using the cord and press the power button. After that, the indicator lights should light up, by which we can understand: the router saw the device connected to it and distributes the Wi-Fi signal.

In addition, you need to make sure that your PC is ready for the new Internet network. To do this, open the Network and Sharing Center (right-click on the network icon next to the volume icon in the lower right corner of the screen). Next, we need to go to the adapter settings page (on the right), open the properties of the current connection that the device has already caught (right-click) and also open the properties of versions 4 and 6 of Internet protocols in them. Most likely you are using the first one, but to be sure, you should set the automatic receipt of data on IP and DNS addresses of the provider for both. After you do this, open the browser - we move on.

The main stage of settings

To date, there is also Zyxel Keenetic 3 (III) generation. You will recognize it by the difference in the shape of the body and the presence of an additional antenna. An enhanced signal is a definite advantage. But even if you have the 2nd generation, the Wi-Fi coverage area should be enough for comfortable work within the same apartment / house.
And so, we opened the browser. The next thing to do is to enter the IP address of the distributing device (Zyxel Keenetic) into the address bar - 192.168.1.1

Open a browser, enter http://192.168.1.1 in the address bar

If the router was previously used by someone, it makes sense to reset the settings by holding the Reset button on the back of the device. It is worth pressing on it for 10-15 seconds.

After going to the above address, an authorization field will appear in front of you. You need to enter the word admin in the login and password, then press Enter, and, voila, you are in the 4G router setup menu! You will immediately be prompted to change your password. We recommend that you do so.

  • The router detected the modem - click "Next";
  • Choose your country, city of residence from the list;

  • We indicate our Internet provider (MTS, Megafon, etc.);
  • We agree to install firmware updates. We are waiting for the files to be downloaded, installed and the router will reboot and Zyxel Keenetic 3 (III) will be ready for further work;
  • We read the description of the new Yandex service for protecting Internet users and decide whether we need it or not;

  • After clicking "Next" we check the network indicator in the PC tray and the loading of a site, click the "Go online" button;

This completes the quick network connection setup! You can disconnect the cord and enter the 4G Internet through a Wi-Fi signal.

The name of the Wi-Fi channel and the password for it are usually indicated on the bottom of the device.

Customizing your own Wi-Fi settings

To change the name (SSID) of the distributed signal, access password, channel and other parameters, you must again enter the main menu of the router, from where we opened the quick setup. While in it, take a look at the menu of icons at the bottom of the screen: we are interested in the tab with the signal strength. Go to it and in the menu (top) select the "Access Point" section.

Having shifted a little down the page, you will see fields with the settings for the main parameters of the Wi-Fi signal:

  • Name - you can change it to your own;
  • Protection - the most perfect is set by default;
  • The network key is your password. Change to your own complex;

It is better not to touch other parameters. You can change, perhaps, the signal strength, if you do not need a too large propagation radius: you can reduce it to 80-70%.

Tip: If several more routers from neighboring apartments / premises are operating in the area of ​​\u200b\u200byour device, there may be interruptions in operation or the network may simply not work fast enough. This is due to the fact that all routers, even if they are not Zyxel Keenetic II or III generations, operate at a similar frequency (by default), and the signal of the Megafon provider is faced with exactly the same. To avoid this situation, you need to change the channel: from the value of Auto to one of the proposed ones, until you understand that the router produces the speed declared by the provider.

How to reset settings programmatically

With various errors, it is most correct and easiest to return the parameters to the factory settings programmatically. To do this, select the last icon of the lower menu (settings icon) in the main panel of the router. On the page that opens, look for Settings, then rewind the page down and see the button to return to factory settings. After clicking, all the changes you have made will be erased and you will need to redo the quick setup and set the network name / password.

Also, next to it you will see a reset button. Sometimes this simple operation can solve the problem, because. during it, Zyxel Keenetic 3 (III) resets the 4G network parameters, receives new IP and DNS addresses. In addition, all devices are disconnected from your network, including uninvited "guests". And, if these clients do not have a password, they will not be able to connect back.

As you can see, connecting Zyxel Keenetic ii routers to 4G modems is a fairly simple procedure that needs to be done and remembered only once. Further, everything will be extremely simple and clear, regardless of whether you are connecting to Beeline, or your provider is Megafon. 3rd generation models are set up in a similar way. So to access the network, you just have to insert a 4G flash drive and start your PC!

Found a typo? Select the text and press Ctrl + Enter

The latest generation Zyxel Keenetic 4G routers are distinguished by an increased network coverage area due to a powerful antenna and a maximum throughput, which in theory reaches 300 Mbps. They support all existing network types and work with all providers. It is advisable to use such a device for distributing 3G / 4G Internet in a private home, small office or enterprise. The device can also be used as a regular router. Let us consider in detail how the Zyxel Keenetic 4G III router is configured.

Connectivity

Video review and instructions for setting up the routerZyxelKeenetic 4GIII, see the following video:

The device comes with a USB extension cable that allows you to place the access point in a convenient place - one end of the cord is connected to the router, the other to the modem (this end has a suction cup for attaching the cable with the modem to the glass).

To connect, you need to turn on the power supply and connect it to the device, connect the modem through the USB port located on the rear panel of the router or through a special extension cord. When using wired Internet, the network cable entering the house or apartment is inserted into the WAN port. We connect the Internet station to a computer or laptop for configuration via LAN.

After loading the device, a Wi-Fi hotspot will appear, to which everyone can join. The settings of the Zyxel Keenetic 4G III router are protected by a simple password, it is better to change it to something reliable.

Training

For the normal functioning of the network, you should select the automatic distribution of IP and DNS servers. This is done in the following way.

  1. Open "Network settings ..." through the context menu of the network icon in the tray.
  1. We call the window for changing the adapter settings, after which we open its properties through the context menu.
  2. We click on the line responsible for changing the parameters of the protocol of the fourth edition, and set the automatic method for obtaining DNS and IP.


  1. We save the new configuration.

Connection

Everything is very simple here.

  1. We connect a LAN cable, crimped at both ends, a router and a computer or laptop through which the device will be adjusted.


  1. We turn on the power supply to the network by plugging its second end into the corresponding connector on the back of the wireless access point.
  2. We connect the modem directly or through an extension adapter, or WAN, if you will distribute the Internet received via cable.


Configuration

Setting up the Zyxel Keenetic 4G 3 router for your needs and connecting it is done in two ways:

  • through the "Configuration Wizard" (automatic);
  • via the web interface (manual).

Automatic

For novice users, a semi-automatic mode is provided that allows you to configure the Kinetic 4G router in a step-by-step mode, only answering the questions of the wizard.

  1. To open the page where the Zyxel Keenetic 4G is configured, launch an Internet browser.
  2. In its address bar we write 192.168.1.1 or my.keenetic.net (look for information on the sticker on the bottom of the case).
  1. We enter data for authorization, usually it is "admin" in both fields.


  1. We immediately enter new data to protect the router configurator. The password here can be removed completely.


  1. Click on the button to launch the configuration wizard.


  1. Once again, click on the button with the same name.


  1. After defining the modem, click "Next". If it was not found, disconnect and reconnect the device, make sure that the drivers for it are available on the computer.


  1. After that, it will be possible to update the firmware for the device by downloading current version from the Internet.


  1. Specify the country of residence.


  1. We select a city to search for providers that work in it.


  1. We indicate the Internet service provider, and if it is not in the list, we try to find or leave the checkbox next to the "My provider is not in this list" parameter.


  1. If necessary, you can enable "Safe Internet with Yandex.DNS" by checking the box next to the option.

The application will protect all network devices from fraudulent web resources, adult content. In the settings there is an opportunity to specify filters.


  1. We go to the Internet by clicking on the button of the same name.


Then the browser will automatically launch with the page of the equipment manufacturer. If there are no connection problems, the green indicator with the planet icon will light up on the router. Now the network cable can be disconnected if it does not connect the computer to the wireless Internet.

Manually

Here you need to know a number of parameters in order to specify the correct settings for each of the providers. There are no difficulties here, except for a couple of features.

Dom.ru and Rostelecom

When concluding a contract with this service provider, we perform the following steps after pairing the modem with a router, and the latter with a PC.

  1. We go to the web interface, as shown earlier, and click "Internet".
  2. In the "PPPoE / VPN" tab, click on the button to add a new connection.


  1. In the "Protocol type" drop-down list, specify "PPPoE", just below enter the authorization information specified in the contract, and apply the changes made.


Beeline

This ISP uses a different protocol, so the setting is slightly different.

  1. We create a new connection, as in the previous case.


  1. In the text form "Type (protocol)" we write "L2TP", enter the server address as "tp.internet.beeline.ru" and registration data for identification with the service provider.


  1. Applying the settings.

NetByNet and Megafon

Providers require registration with a MAC address. For NetByNet:

  1. Create a new connection and select "IPoE" in connection types.
  2. In the first line "Use connector" we indicate the interface numbered "0" - WAN.
  3. In the MAC address line, specify the value "Default".

If necessary, enter it manually. This information is located on a sticker on the bottom or on the bottom of the router case.


All described configuration settings are also suitable for the router model.ZyxelKeenetic 4GII.

Video review of the routerZyxelKeenetic 4G 2 generation see here:

Setting up a Wi-Fi network

Everything is extremely simple here:

  1. After connecting the router to a laptop, PC or smartphone, go to the "Internet Access" menu.
  2. Select your network and connect to it.
  3. We write the security key. We are looking for it either on the router itself, or in its settings.


Operation in repeater mode

In addition to the classic mode of operation, the Keenetic device can also work as a signal repeater to cover a larger area. Switching is carried out in the "Mode" tab: we put the trigger switch in the desired position and apply the new configuration. The device will then reboot.


IPTV

Zyxel Keenetic 4G III is designed to be used for watching digital TV on devices that support TV-port. If it is not available, updating the firmware and pre-configuring it can help:

  • connect the TV to the router;
  • in the settings of the access point in the "Internet" section, activate the "Connection" tab;
  • click on the profile "Broadband connection";


  • check the box in the line "IPTV set-top box" opposite the port to which the set-top box is connected;


  • save the changes, after which the router will be rebooted.

Subtleties of working with the IPv6 protocol

When using the new IPv6 protocol, you must:

  • make sure the protocol is supported by the provider;
  • update router firmware to latest version by downloading it from the official site;
  • check the activity of the "IPv6" tab in the "System Monitor" subsection.


Now you can get started.

  1. We start the Command line.

  1. We execute the command: telnet 192.168.1.1 to establish connection with Keenetic.

  1. We enter into command line the following commands in the given sequence to distribute IPv6 to all clients (you can copy one line at a time and execute with the "Enter" button):
  • interface;
  • ipv6 address auto;
  • interface ipv6 prefix auto;
  • interface ipv6cp;
  • ipv6 subnet Default bind Home;
  • number 0;
  • slaac;
  • exit set net.ipv6.conf.all.forwarding 1;
  • ipv6cp;
  • ipv6 address auto;
  • ipv6 prefix auto;
  • ipv6 name-servers auto; ipv6 subnet Default bind Home;
  • number 0; mode slaac;
  • system config-save.

Safety

To set conditions and actions assigned to them for incoming packets, you must:

  1. In the "Security" tab, click "Firewall", where click "Add".
  2. Select a condition: allow or deny and protocol.
  3. Apply the condition to the required device (enter its IP).
  4. Make changes.


For the first time, there may be problems with the rule's performance, but after several attempts, an understanding of the algorithm of the built-in firewall appears.

Parental control function

Allows you to create a schedule for distributing the Internet to devices with the specified IP on firmware version 2.08.B0 and higher.

  1. In the web interface, go to the "Home Network" tab.


  1. In the menu of connected devices, select those that fall under the created filter and assign them static IP addresses - check the option "Permanent IP address".
  2. In the "System" tab, click "Schedule" and add a new one, where we set time limits for one device.


VPN server

After updating the firmware to version 2 and later, VPN configuration is carried out according to the following algorithm.

  1. In the "System" tab, click on the "Components" section.
  2. Go to the "Applications" subsection, where we activate the "VPN Server" tab.
  3. In the drop-down menu in the "Network access" option, specify the desired interface.
  4. Activate the option "Translate client addresses ...".


If there is no Internet connection, first of all, pay attention to the network indicator. If it does not glow, then the problem is on the provider or modem side. You can also resort to using the "Network Sharing Center" in Windows 10 for diagnostics. Restarting the router often helps.

The following instructions will help you update the firmware:

  1. In the "System" tab, click "Available" in the "Updates" line.
  2. Next to the crosses that need updates, leave the checkboxes and start downloading updates.

At this stage, you need to ensure that there is no power outage to the router.


The same can be done through the mobile program My.Keenetic:

  1. After downloading the program to a tablet or smartphone on Android, we establish a connection with the router.
  2. In the "System" tab, click "Firmware" and start the process of downloading and installing the latest version of the firmware.

The Reset button on the back of the router and the web interface will help you reset the settings to factory settings. In the second case, we follow the path: "System" - "Settings" and click "Return to factory settings ...".


Zyxel Keenetic 4G III Router – good helper when creating a home network of a simple configuration or a network of a small office. To configure it, a little knowledge in the field of network technologies and the implementation of the above recommendations will suffice.

Here is such a large-scale article turned out. I hope everything is clear and useful. Ask questions, feedback is always welcome! Thanks to all!

I get a lot of questions about connecting a 3G or 4G modem to a Zyxel Keenetic router. I think this is not accidental, since at one time these were almost the only routers that were stable without various “crutches” in the form alternative firmware worked with USB modems. Today I want to dwell on two specific examples that I personally used for a long time in my country house, until I became the owner.

The instruction is relevant for any Zyxel Keenetic router with USB port ohm - 4G, Giga, Omni, Ultra, Viva, Extra, etc. with modems of such operators as Yota, Megafon, MTS, Beeline, Tele 2 and Rostelecom.

How to connect 3G-4G modem to wifi router Zyxel Keenetic Giga II via USB?

When choosing equipment for connecting a 3G / 4G USB modem to a router, I settled on the Zyxel Keenetic Giga II model. This device is not cheap, but I can safely recommend it as reliable and practical. universal device with support for most models of modems, as well as flash drives and printers. The price bites, but fully justifies itself.

In the company to him I used. This combination of devices allowed me to create a fairly stable high-speed network in a standard summer cottage of 12 acres without the use of additional amplifying antennas.

Since all the main models of modems, as well as settings for connecting to networks of various providers of mobile 3G-4G Internet, are already embedded in the firmware of the Zyxel Keenetic router, we will not need to manually enter any data when setting up the Yota modem. Everything is very simple

  1. turn on the Zyxel wifi router,
  2. insert a 3G-4G modem into the USB port

This is where our actions end - without additional configurations, it connects to the Internet and starts distributing WiFi.

Next, select the connection priority. That is, whether the 4G-LTE signal will be the main source or a backup. If the main channel from the cable provider is unavailable (for example, they forgot to pay a monthly fee), then the mobile Internet will turn on.

Another useful setting is to set a schedule for the 4G modem.


Either it will work constantly, or on certain days and hours.


To save the changes, you need to click on the appropriate button at the bottom of the page.

Zyxel Keenetic router does not see 4G modem

Often you have to deal with the situation that the Zyxel Keenetic router does not see the 4G modem. The most common reason for this is that these devices are simply incompatible. As you understand, models are constantly updated and the router firmware does not always keep up with their release speed. Therefore, I recommend that you familiarize yourself with the list of supported models on the official website of the company.

That's all - I hope you will find my experience of setting up the Internet useful by connecting a 3G-4G modem to a Zyxel Keenetic router and distributing it via wifi. Read about other companies in a separate article.

Thank you! Did not help

How often do you use the Internet at home? It seems that the question is completely out of place, it is almost impossible to imagine a modern person without a smartphone connected to the network. However, at home, you want high speed, which allows you to download large files, while spending a minimum amount of time. Routers come to the rescue and today we have a review of the ZyXEL Keenetic 4G III, which will provide your home with fast Internet and protect users from unwanted content. Let's take a closer look at this device.

ZyXEL Keenetic 4G II review

Contents of delivery

The device comes in a compact blue and white package on which you can find all the necessary information. At the time of writing the review, the average cost of the ZyXEL Keenetic 4G III, according to the YandexMarket service, was approximately 2,000 rubles. Package Included:

  • Router ZyXEL Keenetic 4G III
  • Power adapter
  • Operation book
  • Warranty card
I was pleased that all the necessary information that an inexperienced user may need is detailed on the box itself.

Characteristics

  • Processor - MT7628N 575/580 MHz
  • Standard wireless communication- 802.11n, frequency 2.4 GHz
  • MIMO support
  • Max. wireless connection speed - 300 Mbps
  • Information security - WEP, WPA, WPA2, 802.1x
  • Switch - 2xLAN
  • Port speed - 100 Mbps
  • Repeater (repeater) mode
  • Number of USB 2.0 Type A connectors - 1
  • Guest network
  • IPv6 support
  • Firewall (FireWall)
  • DHCP server
  • Dynamic DNS support
  • VPN pass through support
  • Support for VPN tunnels
  • PPTP support
  • L2TP support
  • IPSec support
  • Number of external antennas - 2 x 5 dBi
  • Web interface
  • Telnet support
  • The amount of RAM - 64 MB
  • Flash memory size - 8 MB
  • Ability to connect 3G/WiMAX/LTE modem
  • Support IEEE 802.1q (VLAN)
  • Flash memory
  • Dimensions (WxHxD) - 140x30x110 mm
  • Weight - 170 g

Appearance

ZyXEL Keenetic 4G III received a compact size and is made of black plastic. The build quality is pleasing.

On the front panel of the device there are four illuminated symbols that indicate the status and mode of operation of the ZyXEL Keenetic 4G III.

On the top edge of the router is a Wi-Fi control button (WPS/on/off). Here you can also see information about the capabilities of ZyXEL Keenetic 4G III.

On the bottom of the device are two rubber feet and two clips for hanging on the wall. The center contains all the necessary information about setting up the ZyXEL Keenetic 4G III.

On the rear panel of the ZyXEL Keenetic 4G III, there are all the connectors necessary for operation: Internet, Home Network, USB, Reset, power. All connectors are signed and highlighted in a separate color, which allows even the most inexperienced users not to make a mistake.

On the side faces are ventilation holes in a pixel design. Directional-adjustable antennas are also fixed here.

Generally speaking, ZyXEL Keenetic 4G III received a nice design that will be able to fit into the interior of any workspace.

Setup and functionality

ZyXEL Keenetic 4G III is powered by an energy-efficient Mediatek MT7628N (575 MHz) processor in one tandem with operating system NDMS 2. This processor has already shown itself on the good side.

In addition, it should be noted that the device can be managed and configured using the free mobile application, which allows even the most inexperienced users to quickly and easily set up the ZyXEL Keenetic 4G III

The mobile application allows you to remotely control the ZyXEL Keenetic 4G III and configure all the necessary settings.

The router settings menu is divided into many tabs, which makes it possible to more carefully approach all settings.

The mobile application has the ability to quickly configure the Internet, which greatly simplifies most tasks.

ZyXEL Keenetic 4G III also supports USB modems, which allows you to use this router in your office. This feature allows you to minimize the cost of the Internet, and leave the same speed.

Speed ​​tests

The data rate of LAN shows higher results than LAN-WAN. However, despite this, it remains very high and will be enough to work in the networks of our providers. The speed is approximately 150 Mbps. Given that most providers do not provide users with Internet speeds above 100 Mbps, ZyXEL Keenetic 4G III will be the perfect solution for your home.

Results for ZyXEL Keenetic 4G III

Summing up, it should be said that a high connection speed will allow you not to think about anything. An excellent security system that will be able to protect your children from various banners with obscene content, thanks to the "Safe Internet" setting, which allows separate filtering of connected devices. The ability to manage ZyXEL Keenetic 4G III using a mobile application opens up new opportunities for users. In addition, it should be noted that you can automatically restart the USB modem if it, in turn, freezes. You can also install new updates using a mobile application and do it remotely. All this for a small cost. The choice is yours, we can only show and tell.
mob_info