Correct connection of the gamepad to the computer. How to connect a wireless joystick? Connecting xbox 360 gamepad to pc

In addition, sitting at a table playing the keyboard is not always convenient. Another thing, sit comfortably on the couch or in a chair so that nothing distracts you from the game.

Ways to connect an Xbox 360 joystick to a computer

Many already know that some Xbox 360 controllers are wireless, but they can also be connected via cable. That is why we will consider both variants, and which one you choose will depend on your preferences.

The easiest option is to connect the joystick from the Xbox 360 to the computer, armed with special USB cable. Why this method is easier than its counterpart, you will soon find out.

To get started you will need download driver package, so that the gamepad is defined in the system as a new device. This will help the official website of Microsoft.

Driver selection should be based on your operating system version, that is, if you have Windows 7, then the archive must be downloaded specifically for the "seven".

If your PC is running Windows 10 and it has auto-update enabled software- the system itself will download all the necessary drivers as soon as you connect the gamepad. Of course, the computer must be connected to the Internet.

After installing the system files, the OS will warn you about the definition of a new device, and after a few seconds it will say that it ready to use.

Let's move on to the "more difficult" option - wireless connection controller from the Xbox 360 to the computer. To make it work, you will need to get a receiver that receives a signal from a joystick and transmits it to a PC. Only if you do not have this device, this method will be difficult, since you will have to look for the receiver. Given that the console is far from new, this can cause some difficulties.

Otherwise, this method is very convenient. After connecting the receiver to the PC, you need to click on the sync button- first on it, and then on the gamepad.

Pay attention to the button guide located in the center of the joystick, if it lights up green, everything is done correctly.

Solve problems connecting an Xbox 360 controller to a computer

It happens that when you try connect joystick from xbox 360 to pc, Windows cannot recognize the device type. First, plug the cable or receiver into another USB port, this often helps.

If you have not updated your operating system for a long time or are using old versions: 98, XP, Vista, - may occur compatibility issues. You can read more about this on the official Microsoft website. There you can also find detailed guides for solving situations with system errors, OS lags and other nuances that arise when connecting new devices.

Gamepad setup and game selection

After we figured out the connection, you can proceed to the question, how to use xbox 360 controller on pc. In fact, this is not difficult if you have already played on the console before.

In any game that supports gamepad controls, there will be a tab in the settings "Control", where you can see which button is responsible for a particular action. In some games buttons can be remapped, and in some this option is not available.

To find out if the game supports joystick control, look at the description for it, for example, on Steam or on the site from where you will download it. If this is not written, you can search the forums, because surely someone has already played it using a joystick, or tried to do it.

For a more comfortable game, many gamers use special devices - gaming gamepads. They allow you to interact with the gaming environment without a keyboard and mouse. Devices connect directly to computers. It is very convenient, but not always easy to establish synchronization between the respective devices. Especially when it's not about the "native" gamepad. Next, we will try to understand whether it is possible to connect the Xbox 360 joystick to a computer. And how exactly it is carried out. This information can be useful to every gamer who does not have a gamepad for Windows, Linux or MacOS.

Possibility of synchronization

How likely is it to successfully connect an Xbox 360 joystick to a computer? With the right actions - at 100%.

Today, you can connect almost any joystick to a computer or laptop. The main thing is to know how to cope with the task. It's not always easy.

Most of all you have to think about the correct setting of the gamepads. Usually, for "non-native" joysticks, either game parameters or special emulators are used. But the most important thing is to get the said device to work on a PC.

What are gamepads

Connecting an Xbox 360 joystick can be done in different ways. The further algorithm of actions is determined by the type of gaming device available. As well as the operating system used on the PC.

At the moment, there are wired and wireless joysticks. The former, as a rule, are connected much easier than the latter. Next, we will get acquainted with all the existing options for the development of events.

With wires for Windows 10

How to connect an Xbox 360 joystick to a computer? It all depends, as already mentioned, on the type of gamepad available. Let's start with wired devices that sync with Windows 10.

To cope with the task, you just need to connect your PC to the Internet, and then insert the wire from the joystick into USB port. Now it remains to wait a bit - the drivers for the device will be automatically initialized, after which the user will be able to use the corresponding device.

Windows 7/8 and wired models

How to connect an Xbox 360 joystick to a computer? The instruction studied earlier is not suitable for Windows 7 and 8. The thing is that the user will have to manually download the drivers when working with these operating systems. There is no corresponding library package for Windows 8, but drivers from Windows 7 are suitable for the G8.

To connect an Xbox 360 joystick to a computer using a wire, it is recommended to proceed as follows:

Go to the Microsoft website, and then find the section there that is responsible for downloading drivers.
Select the model of the gamepad and select the operating system with which the user works.
Wait for the download of the appropriate set of libraries to finish.
Connect the gamepad to the USB port of the PC.
Initialize drivers for Windows using the downloaded installation wizard.

As soon as the operation is completed, the joystick will work in full force. Usually it does not require additional configuration.

Important: You can download drivers for the Xbox 360 Controller for Windows from other websites.

Without wires

How do you connect an Xbox 360 to a computer? Some claim that this is an easier process than synchronizing devices through wires.

As a rule, in order to achieve the desired result, it is recommended to behave as follows:

Purchase a dedicated Bluetooth adapter for your Xbox 360 controller on Windows. It costs about 600-800 rubles, sometimes included with the joystick.
Connect the purchased adapter to the USB socket on the computer and turn it on.
Install drivers for the appropriate device.
Charge the joystick and turn it on.
Launch the Bluetooth interface on the computer, and then find a new wireless device. It's a plug-in gamepad.
Synchronize the gaming device with the Bluetooth adapter using the corresponding button.

All that's left now is to wait a bit. The drivers for the Xbox 360 controller will be installed, after which the device will start working properly. If the process does not start automatically, it must be activated manually.

Conclusion

We found out how the Xbox 360 joystick is connected to a computer. It's not as hard to do as it seems. The main thing is to follow these recommendations and guidelines.

Problems often arise with wired models. For example, they may not work when gamepads are connected to the front USB sockets. In this case, you need to connect the device to the rear ports.

Some time ago, my son began to ask Xbox 360 gamepad to play your favorite games on Windows PC. We never had game consoles in our house - only a computer and a laptop, but from somewhere he brought knowledge about this particular joystick for the console from Microsoft. Well ... the thing is not so expensive + I wanted to please the heir with something new. As a result, after studying the characteristics and capabilities - Xbox 360 controller for Windows was ordered in one of the online stores, and the next evening was already actively tested by the whole family. In the proposed review, I will present my impressions of the acquisition of a game controller.

Differences between the "simple" Xbox 360 controller and the "for Windows" version.

Before buying, we agreed that we would limit ourselves wired version. Further, it turned out that the stores offer two versions of this gamepad - in red and green packages. With the wireless version of the joystick, everything was clear - the red one also comes with a wireless controller for the computer. To understand the differences for wired version took a little longer. Trouble was made by descriptions in online stores regarding the compatibility of the device.

For "red" gamepads everywhere indicate the ability to connect as a set-top box Xbox 360, so to PC. And here in the description "green"- the readings differ: somewhere only the prefix was indicated, but in the comments the owners said that it connects to the PC without problems. An inquisitive mind longed for an answer - what is the difference. As a result, information was found that all gamepads for PC and consoles are hardware identical, and the boxes differ only in the presence of a disk with drivers and software in the red "for Windows" version. Of course, I ordered a green box, because. I was not going to overpay for a disk with drivers and software. Especially considering that the presence of a disk increased the price by more than 20% (2300 rubles –> 2800 rubles as of March 2015). For gamepad Xbox 360 drivers download You can from the official website of Microsoft.

Fake Xbox 360 controllers.

While I was looking for information on the choice of "red vs green" - I came across warnings about the presence of a large number fakes gamepad. In the following, I will describe methods for recognizing original xbox 360 controller and do not buy a flimsy fake. Hologram The bottom of the device should contain a large "Microsoft" and a small "Xbox 360". Microsoft invests in packaging instructions in several languages. Together wire break(protection against falling consoles) the original joystick has a dash and a dot (not arrows looking at each other). The wire for a quality product, it should be tied with wire in a plastic sheath (and not just plastic tape without a hint of wire). Between the buttons LB and RB (triggers) should be inscription " Xbox 360» . pay attention to round badge on the box: which should contain "Created by - XBox - Microsoft" (pirates forget the word "Microsoft"). So you can recognize fakes without opening the box. They prudently forget to put the name of the manufacturer on back sticker the manipulator himself. Cogs, which are visible from the bottom of the wired controller, should be cross (not hex), although the wireless original already went hex. Personally, I didn’t hold a fake in my hands, but they say that a product that is “made in the basement of the house opposite” is easily recognized blindly when used: the wrong surface, a flimsy creaking assembly, different gaps between parts, completely different tactile sensations from buttons, vibration not a cake at all, etc.

Connecting an Xbox 360 controller to a computer.

In terms of Connecting an Xbox 360 controller to a PC, everything is very simple: plug the connector into the USB port of the computer and wait for the drivers to be installed. Starting with Windows Vista − operating system she will determine what kind of device was connected and deal with the service software. In case something went wrong (or you have Windows XP installed), you can download driver from the official Microsoft website and install/update it manually. After the central button Xbox 360 controller one segment will light up - you can safely go to save the Earth or make sharp turns in your favorite games. In other words, pure Plug'n'Play technology for Windows Vista and newer.

Some gamepad properties and settings are available through " gaming devices"("Start" -> "Run" -> "joy.cpl"). There you can also select your preferred device for use with older games.

First impressions of the Xbox 360 controller.

In the hands of the gamepad sits very comfortably. The younger generation does not complain at all that there are some problems. Those. perfect for a small hand. In the large palms of an adult, the device is felt, in my opinion, also quite decently. The grip is comfortable and, compared to the manipulators of the past, is “a big step for all of humanity.” The surface is not slippery - rough and matte plastic with small glossy inserts. With prolonged use, it does not try to slip out of wet hands. The location of the controls is convenient, but when used crosses the thumb of the left hand has to be twisted a little. Perhaps it just seems to me or is a feature of my hand or the grip of the gamepad.

In the photo (view from below or from the side) you can see the course of the triggers - they are recessed flush with the body. Tactilely, their travel feels very large, but this allows you to smoothly accelerate or brake in racing simulators. The angle of the analog sticks allows for the same smooth control. Generally convenience using a gamepad is rated by me as " very good" (not " the crown of dreams and technology", but quite convenient). Unlike using the keyboard and mouse, the player is not "tied" to the table. Long cable 2.7 meters allows you to play both from the sofa and lounging in an armchair - to play using Xbox 360 controller comfortable in any position. I don’t feel sorry for the money spent: if I were a gamer myself, I would be satisfied with the purchase ... A player who is several times younger than me is definitely “deeply happy”.

How to connect a gamepad to a computer?

Many gamers prefer to play PC games on consoles. But many games look much better visually on the computer. Therefore, some "console players" use a computer to play games, while connecting a gamepad to it for convenience. However, not everyone knows how to properly connect the gamepad to the computer so that it works.

Connecting an Xbox 360 controller to a computer

There are two ways to connect an Xbox 360 controller to your computer:

With wire

To do this, just insert the gamepad into a free usb port on your computer, and then install the necessary drivers that can be downloaded from the Internet or installed from a disk. AT latest versions OS Windows installation drivers are generated automatically when you connect the gamepad. After installation, it is advisable to check the gamepad for operability.

Wireless way

To do this, you need a receiver that will connect the gamepad and the computer via wireless network. Drivers will need to be installed. Then turn on the receiver and gamepad. Press the connect button on the receiver, which will flash green. Then you need to press the connect button on the gamepad, which is located on the back. It remains to wait until the devices see each other and turn green, indicating that they are connected.

In this way, the gamepad from the Xbox 360 is connected. The gamepad from the Xbox One is easier to connect.

Connecting an Xbox One controller to a computer

Connecting the Xbox One controller to your computer is much easier than the previous generation. It is enough to find a suitable wire to the gamepad and insert it into the USB port of the computer. The drivers will be installed automatically and you can use it.

You can also make the connection wireless using the receiver in the same way as with the Xbox 360 controller.

Connecting a PS3 controller to a computer

Connecting a controller from a PS3 to a computer is much more complicated than an Xbox controller. This is due to the fact that you need to install special drivers so that Windows sees the gamepad and can work with it. However, over time, a simple way to connect has been developed:

Download the archive with the drivers from here.
We connect the gamepad.
Open the "Device Manager" and find our gamepad, which is likely to be marked with a question mark. Open the device properties through the context menu. Go to the "Drivers" tab. Click "update" or "install drivers" and specify the path to the downloaded drivers.
Install the "ForceFeedbackDriver" driver, which is also located in the downloaded drivers folder. This driver is responsible for the vibration of the gamepad during the game.
Install the SDDriverSetting driver from the folder, which will help in assigning keys and setting up Bluetooth.

After that, the gamepad should work correctly with Windows OS.

With the controller from Xbox One and 360, you can control games both on the console and on the computer, thereby replacing the mouse and keyboard. Consider the options for connecting gamepads from Xbox to PC.

Wireless controller from Xbox One + PC

1) Wired via micro-USB cable

An Xbox One controller can be connected to a PC using a USB cable. For this you need to have:

Wireless controller from Xbox One;
Cable "USB - micro-USB";
PC with Windows 7 and above.

We connect one part of the wire to the gamepad, the other is inserted into the USB connector on the computer. Most often, drivers are loaded automatically. For owners of Windows 10, you do not have to configure anything yourself.

× Problems occur when on a computer with Win 7, 8 and 8.1 auto-update not enabled then the installation must be done manually.

Go to "Settings", then to "Devices" and at the bottom "Device Manager";
Select the line "Microsoft Xbox One Controller", then right-click and "Update Drivers";
Doing " Automatic search…” (Internet required);
We are waiting for the driver to be installed and check.

If the joystick does not work, then we switch it to another USB connector on the computer.

2) Xbox Wireless Adapter for PC

For the controller to work, do the following:

We connect the adapter to the PC via the USB connector;
Go to "Settings" - "Devices" - "Bluetooth and other devices";
There, click "Add Bluetooth or other device";
Find "Everyone else" and click on "Controller from Xbox One"
We install and check the performance of the controller.

3) Bluetooth connection

A distinctive feature of the updated gamepad from Xbox One S and Future X, is that it has Bluetooth technology. The device is compatible with any hardware on which the operating system is installed. Windows-10 system.

To connect the gamepad to a PC via Bluetooth, do the following:

Turn on the Xbox One S controller;
Turn on Bluetooth on the computer and go to "Settings" - "Devices" - "Add Bluetooth or other device";
We are looking for "Gamepad from XboxOne" and activate the device;
Check and enjoy.

× Mode « In airplane» turns off all radio modules (WiFi, Bluetooth, GPS).

Gamepads from Xbox 360 for PC

1) Xbox 360 wired joystick.

On Win10, the drivers are installed automatically, there should be no difficulties.

On Windows 7, 8 or 8.1 you may have to install the software yourself:

We go to the Microsoft store, look for the desired gamepad, and click "Downloads".
Select the desired operating system version (7, Vista or XP).
Download, install and restart the PC;
We connect the Xbox 360 gamepad and check.

For Windows 8 and 8.1 use Win7 compatibility mode. For this you need:

Download software for 7-ki;
After downloading, right-click on the file and select "Properties";
Tab "Compatibility" and check the box "Run this program in compatibility mode";
Select the OS "Windows 7" and the button "OK";
We start the installation of drivers, after which we connect the gamepad and check the settings.

2) Xbox 360 Wireless Joystick.

We connect the receiver to the USB-2.0 input on the PC.
Driver installation will start automatically, but you can install them from a disk or from the Internet.
Turn on the controller from the Xbox 360.
We press the button on the receiver and then click the "Connect" button on gameada 360(from above between the triggers).
The connection will be established when the lights stop blinking and turn solid green.