We create an access point on a PC using the function. We create an access point on a PC using the Control of connected hotspots function

Finally, Windows 10 has a standard and simple feature that allows you to distribute the Internet via Wi-Fi from a laptop or computer. This feature is called "Mobile hotspot". This is a separate tab in the settings, where you can launch a Wi-Fi access point in just a few clicks. All you need to do is enter a name and wifi password the network that the laptop will distribute, and specify the Internet connection from which you want to distribute the Internet to your devices.

Now, in order to distribute the Internet via Wi-Fi in Windows 10, you do not need to perform complex configuration of the access point through command line, as I wrote in the article How to distribute the Internet via Wi-Fi from a laptop in Windows 10, or use third-party programs. It is enough to set up "Mobile hotspot", and activate the wireless access point function. You will also be interested in 8 hidden features of Windows 10.

So, in order to turn on the hotspot, click on the "Start" button on the taskbar and click on the "Settings" icon or press the keyboard shortcut + I

Go to the "Network and Internet" section.

In the "Network and Internet" section, open the "Mobile Hot Spot" tab

In the “Mobile hotspot” tab that opens, we see that the wireless network name (SSID) and password are assigned automatically, but you can change the network name and password by clicking on the “Change” button

In the "Change network information" window, change the network name and network password (at least 8 characters), click the "Save" button

Next, in the "Internet connection sharing" drop-down list, select the connection through which you have an Internet connection, it does not have to be "Ethernet", it can be wireless network or the name of your 3G/4G modem. See also How to see the password hidden by asterisks in the browser and How to register on Instagram from a computer.

To launch a mobile hotspot, click on the switch next to the item "Allow my Internet connection to be used on other devices."

Now that the mobile hotspot is set up and enabled, any Wi-Fi-enabled device can connect to it. 8 devices can be connected to the access point at the same time. Information about connected devices will be displayed in the same window.

I decided to connect my 3G USB modem to my laptop and try to run "Mobile Hot Spot". After all, many people use the Internet through 3G / 4G modems, and want to distribute it to their mobile devices without buying a router. This method will suit you, everything works fine.

This is how it will look like for you

Mobile Hotspot Management

You can disable the function itself and stop distributing the Internet simply by setting the switch to the "Off" position. in the settings window.

Everything is very convenient and easy to set up. You will also be interested in TOP jokes from Google and Yandex developers and Temporary mailbox for registration.

Possible problems when distributing the Internet in Windows 10 through a mobile hotspot, and their solutions

As I wrote above, in the process of starting the access point, you may encounter various errors. When I tried to run a mobile hotspot on a desktop computer with a TP-LINK TL-WN720NR adapter, I also encountered the error "Cannot configure mobile hotspot. Turn on Wi-Fi." No matter what I did, I could not start the virtual network. At the same time, on the same computer, with this adapter, it is possible to start distributing the Internet through the command line without any problems.

Error "Can't set up mobile hotspot. Please turn on Wi-Fi"

This error looks like this:

According to my observations, this error appears due to problems in the Wi-Fi adapter driver, or because the virtual adapter is disabled. At the same time, as I wrote above, I could not defeat this error on one computer. Although, there were all the necessary drivers in the device manager, and they worked. Even if your Wi-Fi is turned off with the button, the mobile hot spot starts up smoothly.

If you think logically, then the problem is definitely not the absence of a wireless adapter driver, because if there were no driver, then the Mobile Hot Spot tab would not exist at all. Just like the "Wi-Fi" tabs in the settings.

The problem must be looked for in the device manager. First of all, try updating the Wi-Fi adapter driver. Reinstall it by downloading from the manufacturer's website. If this does not help, then go to the device manager, and check if there is a "Microsoft Wi-Fi Direct Virtual Adapter" there. It may have a number at the end. It is through this adapter that the laptop distributes Wi-Fi in this way.

To do this, you first need to enable the display of hidden devices. If there is an icon next to the "Microsoft Wi-Fi Direct Virtual Adapter", then right-click on it and select "Enable".

A few more solutions

1 Error "This Internet connection cannot be shared because there is no connection to a mobile network."

I got such an error when I tried to start distributing the Internet when connected via a 3G modem. Everything was solved by simply restarting the Internet connection. Make sure the internet on your computer is working. You can restart your computer, connect to the Internet and start all over again.

2 Error: "Could not set up mobile hotspot because the computer does not have an Ethernet, Wi-Fi, or cellular connection."

You will most likely see such an error only if your computer is really not connected to the Internet. Check connection.

This error also appears when your Internet is connected via PPPoE (high-speed connection). The mobile hotspot does not see such internet connections.

3 Devices do not connect to a running Wi-Fi network. I have not encountered such a problem, but everything can be. Most often, the connection is blocked by antiviruses and firewalls. Disable them and check your network connection.

Finally, Windows 10 has a standard and simple feature that allows you to distribute the Internet via Wi-Fi from a laptop or computer. This feature is called "Mobile hotspot". This is a separate tab in the settings, where you can launch a Wi-Fi access point in just a few clicks. All you need is to set the name and password of the Wi-Fi network that the laptop will distribute, and specify the Internet connection from which you want to distribute the Internet to your devices.

Now, in order to distribute the Internet via Wi-Fi in Windows 10, you do not need to perform complex settings for the access point via the command line, as I wrote in the article How to distribute the Internet via Wi-Fi from a laptop in Windows 10, or use third-party programs. It is enough to set up "Mobile hotspot", and activate the wireless access point function. You will also be interested in 8 hidden features of Windows 10.

So, in order to turn on the hotspot, click on the "Start" button on the taskbar and click on the "Settings" icon or press the keyboard shortcut + I

Go to the "Network and Internet" section.

In the "Network and Internet" section, open the "Mobile Hot Spot" tab

In the "Change network information" window, change the network name and network password (at least 8 characters), click the "Save" button

Next, in the drop-down list "Internet Connection Sharing", select the connection through which you have an Internet connection, it does not have to be "Ethernet", it can be a wireless network or the name of your 3G / 4G modem. See also How to see the password hidden by asterisks in the browser and How to register on Instagram from a computer.

To launch a mobile hotspot, click on the switch next to the item "Allow my Internet connection to be used on other devices."

I decided to connect my 3G USB modem to my laptop and try to run "Mobile Hot Spot". After all, many use the Internet through 3G / 4G modems, and want to distribute it to their mobile devices, without buying a router. This method will suit you, everything works fine.

This is how it will look like for you

Mobile Hotspot Management

You can disable the function itself and stop distributing the Internet simply by setting the switch to the "Off" position. in the settings window.

Everything is very convenient and easy to set up. You will also be interested in TOP jokes from Google and Yandex developers and Temporary mailbox for registration.

Possible problems when sharing the Internet in Windows 10 through a mobile hotspot, and their solutions

Error "Can't set up mobile hotspot. Please turn on Wi-Fi"

This error looks like this:

To do this, you first need to enable the display of hidden devices. If there is an icon next to the "Microsoft Wi-Fi Direct Virtual Adapter", then right-click on it and select "Enable".

A few more solutions

1 Error "This Internet connection cannot be shared because there is no connection to a mobile network."

2 Error: "Could not set up mobile hotspot because the computer does not have an Ethernet, Wi-Fi, or cellular connection."

You will most likely see such an error only if your computer is really not connected to the Internet. Check connection.

This error also appears when your Internet is connected via PPPoE (high-speed connection). The mobile hotspot does not see such internet connections.

Thanks to the mobile hotspot feature that has appeared, users can easily share the Internet with other computers and gadgets.

Content:

OS version check

The built-in hotspot creation feature was introduced in the latest W10 OS update.

Previously, users could not set up wireless Internet distribution without the help of third-party gadgets or programs.

Mobile hotspot option only supported in version 1607 updates of the licensed ten.

Before you start setting up distribution, you should check the version of your operating system.

Follow instructions:

Press the key "Notification Center" ;
On the left side of the screen, the latest events tab and shortcut keys will appear. Click on the "Options" tile;

In the window that opens, find the "System" tile and click on it;

Open the "About" tab. In the right part of the window, information about the parameters of the PC and the installed OS will appear;
Check the value of the "Version" field. For the mobile spot function to work, only W 10 U pdate 1607 or more a new version systems.

If the computer does not have update 1607 installed, check for it for your PC and laptop you can in the following way:

1 Go to the notification center again and open the window "Options";

2 Click on "Update and Security";

3 In a new window, click on the check for updates button and wait for the process to complete. If there are updates available for your PC, a corresponding message will appear on the screen along with a key to start the installation. An active Internet connection is required to scan and install.

Important! Before starting the installation of updates, save the result of all open programs, as the computer will be restarted.

Update adapter drivers

After enabling the function, Internet distribution may not be supported by other gadgets due to the lack of the necessary network adapter drivers on the PC.

To update software, should take these steps:

Open Device Manager window by right-clicking on the "Windows" button;

In the new window, find the tab "Network adapters" and expand it. Then click on the section with the right mouse button and click on the item "Update Configuration". Make sure WAN connection is enabled;

Now network devices will interact with this function without problems.

Hosted network support

The function will not work if the computer or laptop does not support a hosted network.

You can check this parameter using the OS command line.

To check an option follow instructions:

Launch Command Prompt with Window "Windows Search";
Enter the command shown in the figure below into the window and click Enter for its implementation;

In the appeared system information find the line shown in the figure below. The parameter value must be positive. Only in this case it will be possible to set up a working distribution of the Internet for other gadgets.

If there is no hosted network support, this means that you need to purchase an additional physical USB adapter, which works with such a function. The device connects to a computer and uses it to set up mobile access.

We create through the OS interface

Once you've verified that you're using the correct version, downloaded the latest, and verified hosted network support, you're ready to set up your distribution.

A preliminary check of all functions will allow you not to encounter errors as a result of creating an access point.

An easy way to create a spot is to use the interface Windows :

1 Go to the window "Windows Settings" and click on the section "Network and Internet";

2 Listed "Sharing" select the type of internet connection that your computer uses. Wireless connection- connected to PC ethernet– connection via cable, 3G– connection to the global network via . If at the moment the PC is connected to the Internet with only one type of connection, the system will automatically detect it;

3 Open the tab "Mobile Hot Spot" and in the right part of the window, activate the option enable slider;

Also, the window will contain information for connecting to the network. The network name is the name of your computer that you set during the initial .

The password is determined by a set of random characters. You can change these settings by creating a stronger password or a new network name.

Just click on the key "Change" and enter the required values in the window that opens:

Now the created access point will be displayed on all devices that work with. Run a scan for available networks and select the name of the access point you created earlier. Enter the password and connect. The Internet connection on the other gadget will be active as long as the function is enabled on the computer. "Mobile Hot Spot".

On the computer, in the creation and settings window, the number of devices that are connected to the Wi-Fi distribution will be displayed.

Also, you can view the device name, device and physical ID.

Distribution using the command line - suitable for all versions of Windows

This hotspot option suitable for all system versions Windows 10 . The only disadvantage of the method is that the work with the function occurs not through the operating system program interface, but via command line:

Open Command Prompt on behalf of the administrator;
Enter the command shown in the figure below, where NetworkName is the name of the network, NetworkPassword - access password;

As a result of the successful execution of the command the following message will appear:

Troubleshooting

When attempting to create, error messages may be displayed in the function window. Until the problem is fixed, you will not be able to use the function.

We will analyze all types of errors, which may be encountered during the access point setup process.

hotspot setting error

If you see a message stating that the configuration failed, first check the connection with the router.

The access point is not created due to the fact that the computer is missing.

Check Wi-Fi connection status or you can connect to another router by clicking on the corresponding symbol on the main toolbar. Near the network with an active connection, the inscription will be displayed: "Connected", but not "No internet access". Otherwise, restart your router and try connecting again.

No network connection

Another type of error is that, due to the lack of the necessary drivers, the system cannot configure the point. The Internet is on the computer, but it is not created.

If you see the same message in the settings window as in the figure below, run . The update instructions were described above as a separate subsection.

After updating the driver software, go to "Windows Settings" and open tab "Network and Internet".

Then select the item "State" in the window that opens, click on the field "Network Reset". Then reconnect to Wi-Fi, Ethernet, or modem.

Gadgets do not connect to hotspot. What to do?

There are cases when the user performed the distribution and no system messages error did not appear, but other gadgets cannot.

In this case, you need to disable the computer firewall. Standard or third-party antivirus software may block the WAN sharing feature.

To disable the default "Windows Defender", in the OS settings window, open the field "Defender" and disable the function as shown in the figure below.

Then disable and restart mobile access. Now the gadgets should connect to the Internet distribution without any problems.

Connectivity Benefits

Usage has the following benefits:

Mobility . The user can set up an access point anywhere, regardless of their location or external conditions. The only requirement is the presence of the Internet on the PC;
Wireless connection . Internet distribution does not require additional programs, adapters or gadgets. Use only your PC and other device that needs to be connected to the global network;
Data transfer rate up to 11 Mbps . It is worth noting that the connection speed also depends on tariff plan provider, and the number of devices connected to the access point. The fewer of them, the better the Internet speed;
Easy function setting . It can be created in a few minutes with ;
Hot spot is profitable to use when traveling, on business trips and just in everyday life, because this way you do not need to connect a paid tariff for using the Internet for everyone and. Enough and one device that has access to the Internet.

Rules for using the hotspot safely

If you care about the safety of your data (information about payment cards, logins, passwords, messages), always follow rules safe use hotspot features:

When creating a distribution for a network, always set a complex access password . You can not leave the access point free for use by third-party gadgets. The password must consist of numbers and letters of upper and lower case, as well as of special characters;
If a computer or smartphone has found a free access point in a public place, you should connect to it only if you are not going to make any payment transactions or enter logins / passwords in the browser. An attacker can easily find out this data on an open network. Another way to safely use free networks is to programs to create VPN ;
If you still need to use an unreliable open network and log in to the site, use two-factor authentication . It can be enabled in settings. social network, online banking or email client. To enter the site, you will need to enter not only a login-password pair, but also a unique access code that will be sent to the linked number in the form of an SMS message.

Thematic videos:

Thanks to the mobile hotspot feature that appeared in the latest windows update 10, users can easily share the internet with other computers and gadgets.

Unlike a similar function on smartphones, creating an access point on a computer provides better communication channel bandwidth and allows you to connect up to 8 devices to one source.

hot spot(or hotspot) is an area within which there is an active Internet connection. The access point works thanks to the wireless technology for distributing communication channels.

Before starting the setup, you need to checking the following parameters:

Windows 10 version;
Availability of the latest network adapter driver updates;
Check hosted network support.

OS version check

The built-in hotspot creation feature was introduced in the latest W10 OS update.

Previously, users could not set up wireless Internet distribution without the help of third-party gadgets or programs.

Mobile hotspot option only supported in version 1607 updates of the licensed ten.

Before you start setting up distribution, you should check the version of the operating system you are using.

Follow instructions:

Press the key "Notification Center";
On the left side of the screen, a tab of recent events and keys for quick access to system settings will appear. Click on the "Settings" tile;

In the window that opens, find the "System" tile and click on it;

Open the "About" tab. In the right part of the window, information about the parameters of the PC and the installed OS will appear;
Check the value of the "Version" field. For the mobile spot function to work, only W 10 U pdate 1607 or newer version of the system.

If the computer does not have update 1607 installed, check for it for your PC and laptop you can in the following way:

1. Go to the notification center again and open the window "Options";

2. Click on "Update and Security";

3. In a new window, click on the check for updates button and wait for the process to complete. If there are updates available for your PC, a corresponding message will appear on the screen along with a key to start the installation. An active Internet connection is required to scan and install.

Important! Before starting the installation of updates, save the result of all open programs, as the computer will be restarted.

Update adapter drivers

After enabling the function, Internet distribution may not be supported by other gadgets due to the lack of the necessary network adapter drivers on the PC.

To update the software, should take these steps:

Open Device Manager window by right-clicking on the "Windows" button;

In the new window, find the tab "Network adapters" and expand it. Then click on the section with the right mouse button and click on the item "Update configuration". Make sure WAN connection is enabled;

Now network devices will interact with this function without problems.

Hosted network support

The function will not work if the computer or laptop does not support a hosted network.

You can check this parameter using the OS command line.

Hosted network is a technology that allows the system to create one or more virtual adapters based on the physical one (which is built into the computer).

To check an option follow instructions:

Launch Command Prompt with Window "Windows Search";
Enter the command shown in the figure below into the window and click Enter for its implementation;

In the appeared system information find the line shown in the figure below. The parameter value must be positive. Only in this case it will be possible to set up a working distribution of the Internet for other gadgets.

Create via interfaceOS

Once you've verified that you're using the correct version, downloaded the latest drivers for your network adapters, and verified hosted networking support, you're ready to set up distribution.

A preliminary check of all functions will allow you not to encounter errors as a result of creating an access point.

An easy way to create a spot is to use the interface Windows :

1. Go to the window "Windows Settings" and click on the section "Network and Internet";

2. Listed "Sharing" select the type of internet connection that your computer uses. Wireless - a Wi-Fi router is connected to the PC, ethernet– connection via cable, 3G– connection to the global network via a 3G modem. If at the moment the PC is connected to the Internet with only one type of connection, the system will automatically detect it;

3. Open a tab "Mobile Hot Spot" and in the right part of the window, activate the option enable slider;

Also, the window will contain information for connecting to the network. The network name is the name of your computer that you set during the initial setup of Windows.

The password is determined by a set of random characters. You can change these settings by creating a stronger password or a new network name.

Just click on the key "Change" and enter the required values in the window that opens:

Now the created access point will be displayed on all devices that work with Wi-Fi networks. Run a scan for available networks and select the name of the access point you created earlier. Enter the password and connect. The Internet connection on the other gadget will be active as long as the function is enabled on the computer. "Mobile Hot Spot".

On the computer, in the creation and settings window, the number of devices that are connected to the Wi-Fi distribution will be displayed.

Also, you can view the device name, its IP address and physical ID.

Distribution using the command line - suitable for all versionsWindows

Open Command Prompt on behalf of the administrator;
Enter the command shown in the figure below, where NetworkName is the name of the network, NetworkPassword - access password;

As a result of the successful execution of the command the following message will appear:

Troubleshooting

When attempting to create, error messages may be displayed in the function window. Until the problem is fixed, you will not be able to use the function.

We will analyze all types of errors, which may be encountered during the access point setup process.

hotspot setting error

If you see a message stating that the configuration failed, first check the connection with the router.

The hotspot is not created because the computer does not have an Internet connection.

No network connection

Another type of error is that, due to the lack of the necessary network adapter drivers, the system cannot configure the point. The Internet is on the computer, but it is not created.

If you see the same message in the setup window as in the picture below, please update your drivers. The update instructions were described above as a separate subsection.

After updating the driver software, go to "Windows Settings" and open tab "Network and Internet".

Then select the item "State" in the window that opens, click on the field "Network Reset". Then reconnect to Wi-Fi, Ethernet, or modem.

Gadgets do not connect to hotspot. What to do?

There are cases when the user performed the distribution and no system error messages appeared, but other gadgets cannot connect to the hotspot.

In this case, you need to disable the computer firewall. Standard or third-party antivirus software may block the WAN sharing feature.

To disable the default "Windows Defender", in the OS settings window, open the field "Defender" and disable the function as shown in the figure below.

Then disable and restart mobile access. Now the gadgets should connect to the Internet distribution without any problems.

Connectivity Benefits

Usage has the following benefits:

Mobility . The user can set up an access point anywhere, regardless of their location or external conditions. The only requirement is the presence of the Internet on the PC;
Wireless connection . Internet distribution does not require additional programs, adapters or gadgets. Use only your PC and other device that needs to be connected to the global network;
Data transfer rate up to 11 Mbps . It is worth noting that the connection speed also depends on the provider's tariff plan, and on the number of devices connected to the access point. The fewer of them, the better the Internet speed;
Easy function setting . It can be created in minutes using the Windows 10 interface;
Hot spot is profitable to use when traveling, on business trips and just in everyday life, because in this way you do not need to connect a paid tariff for using the Internet for each of your computers and smartphones. Enough and one device that has access to the Internet.

Rules for using the hotspot safely

If you care about the safety of your data (payment card information, logins, passwords, messages), always follow rules for safe use of the hotspot function:

When creating a distribution for a network, always set a complex access password . You can not leave the access point free for use by third-party gadgets. The password must consist of numbers and letters of upper and lower case, as well as of special characters;
If a computer or smartphone has found a free access point in a public place, you should connect to it only if you are not going to make any payment transactions or enter logins / passwords in the browser. An attacker can easily find out this data on an open network. Another way to safely use free networks is to programs to create VPN ;
If you still need to use an unreliable open network and log in to the site, use two-factor authentication . It can be enabled in the settings of the social network, online banking or email client. To enter the site, you will need to enter not only a login-password pair, but also a unique access code that will be sent to the linked number in the form of an SMS message.

Thematic videos: