Simple methods to remove scratches from touch screen. How to remove scratches from a phone How to remove scratches from a phone

To remove scratches, you need to turn off your phone before starting work. Seal the external connectors with electrical tape or masking tape to prevent water from getting inside the gadget. You can restore the display to its original appearance at home using one of the methods listed below.

Baking soda

It is an affordable tool for removing scratches from a smartphone screen because it is inexpensive. It is sold in classic red and white cardboard packaging. Many homes have it available.

Soda has abrasive particles, thanks to which the product will effectively cope with the task. You need to use it as follows:

1. Mix two parts baking soda and one part water in a container. You should get a homogeneous mass.
2. Apply the paste to a soft, clean cloth, preferably cotton or microfiber, and gently rub the scratches on the screen in a circular motion. You can wipe the entire display.
3. Remove any remaining baking soda with a damp cloth.

If you have small children in the house, you can take powder and add water to it. You will get a paste that will also help cope with the problem. The method of use is the same as with baking soda.

Toothpaste

This remedy is usually found in every home. But toothpaste should be regular, not gel. And it only works on minor scratches.

To clean the screen, squeeze a small amount of paste onto a cotton pad. Then gently rub it in a circular motion onto the desired part of the screen. After this, wipe the display with a cloth slightly moistened with water to remove any remaining paste.

Car scratch remover

The methods described above are simple, and items for removing scratches can be found in almost every home. The method using a car product is also not complicated and is more effective. You can buy car polish at almost any auto store.

The process for removing scratches is similar to polishing a vehicle:

1. You need to apply a little polish (no more than one drop) to the surface of your smartphone screen.
2. Then rub the substance in a circular motion onto the screen until the scratches begin to visually disappear. The product is effective, and its effect is noticeable immediately. And the result will last for a long time.

Paste GOI

This solid green substance was created back in Soviet times specifically for polishing various surfaces. Widely used in working with glass, ceramics and stainless steel.

Today the paste has also found its use. It restores smartphone displays well.

A small amount of GOI paste is applied to the phone screen. Then rub it onto the screen in a circular motion. The remaining product is carefully removed. As a result of the work, the surface of the phone becomes smooth and clean, just like when purchased in a store.

You can polish the display with Displex paste. Its action is similar to that of GOI paste. The difference is that Displex paste was created not so long ago and specifically for smartphones, while GOI is universal. It can be used to polish various surfaces. The algorithm for removing scratches is the same as with GOI paste.

Of course, you can get rid of scratches on the screen using any accessible ways. You just need to put in a little effort. But to protect the device from the moment of purchase, it is advisable to stick a scratch-resistant film on it. After polishing, you should also protect the display so that you do not have to do this work again.

There is an opinion that scratches on the screen of a smartphone or tablet can be polished even at home and using tools and materials that are sold in regular stores (for example, here is a wholesale office supply).

The opinion is generally correct. In the sense that even such a difficult problem an ordinary user can really solve on his own. But only under the condition of a competent approach to the matter.

In this regard, about what you need to know and what is best to avoid, since you have decided to polish the scratched or worn screen of your mobile device yourself using one of the “effective” methods, of which there are many on the Internet these days.

• magic eraser

The so-called “Magic eraser” (aka Magic eraser) was and is still being produced as a means for removing dirt from polished surfaces. Pollution!

The “option” of polishing was attributed to him not so long ago. Moreover, this kind of product, regardless of the name and/or brand under which it is offered to a potential buyer, is made, as a rule, from the same material - polyethylene foam, which was originally developed as a heat-insulating material, and in the same quality and is applied.

However, a small piece of polyethylene foam, not in the form of a special “Magic Eraser”, but in the form of just a piece cut from the insulating shell of the nearest heating pipe, can indeed, if handled skillfully, be able to polish out small scratches on a smartphone screen in a couple of seconds.

• toothpaste

The technique, as they say, is still old-fashioned, so it works in any case. Another thing is that users often expect a slightly greater effect from it than it can guarantee. In practice, using toothpaste (regular, not gel), you can polish out scratches on plastic protectors for touch screens very well.

Scratches, especially deep ones, and abrasions on Gorilla Glass with toothpaste, unfortunately, can rarely be removed and only after considerable (labor-intensive) effort. On the other hand, toothpaste does a very good job of refreshing almost any plastic screens or protective films, which, as you know, inevitably become cloudy over time and lose their original transparency.

• soda

A thick paste of baking soda (2 parts baking soda + 1 part water) is considered one of the best and most affordable scratch removers. This is true. But only if you use this remedy as advised in books on home economics published in the 60s of the last century, from where, in fact, this recipe was borrowed.

Like toothpaste, a paste made from soda and water can also somewhat refresh the surface of the screen, but there is a high probability that, firstly, there will be even more scratches (since soda is a serious abrasive), and secondly, water will get inside the body of the “polished” device and do worse things there than simple scratches on the screen.

• petrolatum

How can I put it more correctly... Well, think for yourself, don’t you feel suspicious when someone proposes to smear a piece of fat on the screen of a modern electronic device (yours, at that)? No, well, a scratch, of any depth, can, of course, be covered with Vaseline, but then what to do with the grease on the screen?

• erasers

But this “tool”, familiar to all of us from childhood, is worthy of the highest praise. That’s why someone long ago decided to sell simple and reliable school erasers at exorbitant prices as a “super tool” for removing scratches on the screens of smartphones and tablets.

Even a schoolboy can probably polish a scratch with an eraser. The procedure is simple: hold three erasers across the scratch for a minute, then lengthwise for a minute. If necessary, repeat the procedure. Both large and small erasers are suitable, and even very tiny ones that are equipped with pencils. Friction softens the rubber and it fills in scratches. True, this matter also has its own specifics: the main thing is to take high-quality erasers, be sure to turn off the device before you start polishing, and in no case overdo it with pressure on the surface being polished.

• car polish

Special car polishes for removing scratches and chips from metal surfaces, as well as various kinds of creams and pastes for polishing and polishing plastic and glass surfaces of headlights and car windows eliminate, or rather hide, scratches on touch screens, but not always efficiently and most often not for long. But let’s not forget that no one pokes their fingers at the headlights of a car so actively and no one writes SMS messages at the rate of 100 per hour. This means that car polishes, pastes and waxes have a slightly different task.

• starch

The method is somewhat fabulous, but it still exists. Compilers of polishing recipes often suggest polishing scratches on the screen mobile device using a thick starch solution. You can try. But in the end, the result is, as with soda, the surface of the screen looks a little fresher and brighter, but the scratches on it also take on a healthier appearance and are somehow in no hurry to disappear.

Scratches that appear on the phone's display do not add to its attractiveness. It is especially unpleasant when they appear on a new handset or when it needs to be sold urgently. The idea of ​​polishing the glass on your phone using improvised means comes to mind. It is really possible - using our instructions, you will return the display to its original appearance.

Polishing your phone screen using chemical or physical methods will help remove even the smallest scratches. In the first case, special polishes or their substitutes are used, in the second - mechanical means. By the way, in some cases “mechanics” wins over chemistry.

Our task is to tell you about several ways to polish your phone display at home. Your task is to choose the most suitable option. If something threatens to cause even more scratches and roughness, we will warn you. At the same time, we’ll tell you how to polish not only the glass, but also the camera. The camera eye often protrudes beyond the body - when it comes into contact with tables and other objects, it gets scratched.

Restoring the screen using chemical means

We will not use caustic acids or aggressive chemicals. By “chemistry” we mean substances that are found in every home. And some of them are sold in household chemical stores and auto parts stores.

Vegetable oil

We start with vegetable oil - it can be found in every kitchen. It is not aggressive, cheap, and one bottle can restore thousands of glasses. Disadvantages - vegetable oil does not contain abrasive components. It simply masks minor scratches and roughness without removing them anywhere. After some time they will appear again, but they can be removed by repeated wiping.

In order to polish the glass, you will need a cotton pad (any other soft material that does not leave marks will do). Apply some oil to it and rub it over the display. The amount should be small so that the oil fills small rough spots and does not flood the entire phone. You should not use unrefined oils to avoid the formation of an unpleasant odor. Be careful not to let it get into the microphone hole or clog it. It is also necessary to avoid ingestion.

The use of soft, scratch- and rough-resistant fabrics is mandatory for all instructions in our review.

Using baking soda

Regular baking soda is a mild abrasive. It doesn't mask roughness, but actually removes it. A pack of soda costs 20 rubles, no serious expenses. For polishing you will need:

• 2–3 tablespoons salt;
• a small amount of water;
• soft fabric.

Take a small container, add baking soda, add water to make a thick porridge (slightly moist). Next, put a little paste on the screen and rub it in with a piece of soft cloth. Rub carefully and carefully - we do not press the display, but try to return it to its normal appearance by polishing. After 2-3 minutes, check the results by removing the soda with a piece of tissue. Repeat the procedure until positive results are achieved.

Precautionary measures:

• Do not rub the screen with dry soda.
• Make sure that soda does not get inside the phone.
• Do not use a paste that is too thin to prevent water from penetrating through the cracks.

If baking soda doesn't help, use alternative way polishing

Baby powder or talcum powder

The powder will be an alternative to baking soda. You can also use talc instead. Pour the powder into a small container, add a few drops of water, and stir the resulting mixture until a porridge forms. Now apply the paste to the scratches and polish the display until they disappear completely. If necessary, the procedure can be repeated.

Do not use other types of powders - many of them scratch glass and lead to the formation of additional roughness. Don't try to use sand - it's too rough for this purpose.

Applying toothpaste

The next method involves using toothpaste – it doesn’t matter whether it’s domestic or imported. Apply a small amount to scratches and rub in with gentle movements. After some time, the scratches will disappear, giving way to a flat surface. Due to the weak abrasive ability of toothpaste, it can only cope with light roughness.

People who have served in the army can recommend tooth powder. It has more pronounced abrasive properties, but for our purpose it is too rough. It’s better to limit yourself to toothpaste - it’s easier to find, and it’s inexpensive. Even if you use an expensive paste, polishing will not lead to serious expenses - a pea-sized amount is enough.

Car polishes

Evidence of the effectiveness of car polishes are reviews on the Internet. They remove both small scratches and larger ones. The effect of polish makes the car body shine. This is exactly the property we need. Take a small amount of polish, apply it to a soft cloth (we have already given recommendations), and polish the scratched surface of the phone in a circular motion. In a similar way, you can go through back cover and get rid of the scratches present there.

Use of aluminum potassium sulfate and egg white

Quite a complicated method with a preparatory procedure. First, prepare a polishing cloth:

• Mix a teaspoon of aluminum alum with one egg white.
• Heat the mixture to +65 degrees (use a thermometer to control).
• Dip a small piece of microfiber into the mixture and dry it in the oven at 150 degrees.
• Dip the cloth in cold water and dry for 48 hours.

Repeat dipping in the mixture and water two more times. Now start polishing - take the scratched device and polish the damaged area using gentle circular movements.

Microfiber is a polyester fabric that does not leave behind fibers or lint, ideal for polishing. Find it at any fabric store.

Mechanical means

We've dealt with chemistry, now let's move on to mechanical methods. They involve the use of special polishing pastes and tools.

Using GOI or Displex paste

GOI paste was originally designed for polishing telescope lenses. It is a solid paste of tiny abrasive particles. They are so thin that they can polish glass to a mirror finish, a property used in optical telescopes. The same paste is used to rub plaques on army belts, as well as wind musical instruments - the surface is shiny, without visible traces of polishing.

There is nothing stopping you from using GOI paste to polish the glass on your phone. Displex paste is used in a similar way. Apply a little paste to a soft cloth and rub the scratched areas. Felt does this job well - rub a piece of fabric with the paste and start polishing. The same method will polish the glass covering the phone's camera.

Using sandpaper

Quite a strange method, completely ineffective. More precisely, it is effective, but leads to the formation of countless roughnesses. The surface will be smooth, but rough - even if you use a “null”, which has a fine grain. Don’t even think about using sandpaper – you’ll only make things worse.

These tools are convenient when using polishing pastes - the same GOI. We rub the felt roller with it, insert it into the drill, bring the roller to the scratched surface, and process until the scratches disappear completely. Believe me, this is much more effective than rubbing the glass with a cloth with paste applied to it. Grinding machines with special attachments can be used in the same way. They polish glass, ferrous and non-ferrous metals, plastic and other materials to a shine.

A grinding machine is an expensive pleasure. It is better to rent it - it will be much cheaper.

Professional solutions for removing scratches on the touch screen

Professional polishes used for polishing glass and laser discs will help remove scratches on your smartphone screen. Apply the selected product to a piece of soft cloth and polish the damaged area of ​​the glass. If necessary, follow the recommendations and instructions indicated on the packaging of these products.

• Do not use large abrasives or questionable powders.
• First, try the selected tool on an old, unused device.
• Do not use aggressive liquids or solvents.
• Do not heat the phone with hair dryers or other devices.

If you come across some exotic polishing method, look for reviews.

Any doctor will tell you that a disease is easier to prevent than to treat. The same applies to scratches. Find a protective glass for your smartphone on AliExpress and stick it on the display. It costs 100–150 rubles including delivery to the Russian Federation, but provides full protection against scratches for 3–4 months.

Instead of glass, a regular protective film will help - original or compatible (the latter is cut with scissors along the contour of the screen). Simply carrying your smartphone in a closed case will also help. The sooner protection is provided, the fewer scratches there will be on the glass. For other cases, there are our instructions.

Many of us are the proud owners of cutting-edge smartphones with touch screens. However, not all owners of these gadgets know how to handle their property with care. Therefore, over time, small scratches begin to appear on the screen. In this article you will learn how to polish the glass on your phone.

What will be required to perform the manipulations?

You can try removing scratches from your smartphone display using regular toothpaste. It is prohibited to use abrasive powder for these purposes, since the microparticles it contains can damage the screen.

Before polishing the glass on your phone, you need to stock up on soft wipes and a special liquid designed to clean touch screens from microdust and plaque. It is sold in many stores. If this liquid is not available, you can do without it.

Procedure

Before polishing the glass on your phone from scratches, you need to carefully wipe the display. This can be done in a circular motion using a soft rag or a special napkin.

After this, you need to take a clean cloth and, after applying a little toothpaste to it, put it on. After a couple of minutes, you should wipe the entire surface of the screen and polish it with a clean cloth. After completing the procedure, you can wipe the display with cleaning liquid. As a rule, after this all microscopic scratches disappear, and deeper ones become less noticeable.

Professional products

Those who want to figure out how to polish the glass on their phone will be interested in another method. It allows you to remove scratches without leaving a trace without visiting a specialized workshop. To do this you will need GOI or Displex paste. These professional formulations are sold in many communication stores.

Apply a small amount of one of the above products to the display and rub gently in a circular motion using a soft cloth. After the defects have been completely eliminated, the remaining composition must be removed.

Car polishes

There is another, no less effective way to polish scratches on your phone glass. To do this, you will need a special composition designed for car care. Such products can effectively remove defects without damaging the surface itself.

For processing you will need a soft rag and the polish itself. First, you need to apply a small amount of product to the screen. After this, the display is wiped with careful circular movements.

Removing shallow scratches with baby powder

This technique allows you to effectively eliminate small abrasions and minor defects. How to polish phone glass at home? First you need to prepare a polishing paste based on a product that is intended for caring for children's skin. The talc present in the powder will act as a gentle abrasive.

A small amount of dry powder must be diluted with a few drops of water and mixed until a homogeneous mass is obtained. This composition is applied to the screen and rubbed with a soft cloth. At the end of the procedure, remove excess product with a damp cloth.

Baking soda

Almost every housewife has this multifunctional product in stock. It can not only be added to baked goods, but also used for other purposes. The abrasive particles contained in soda perfectly smooth out unevenness on the surfaces being treated.

How to polish the glass on your phone using this ingredient? You need to prepare a special composition. To do this, mix one part baking soda with two parts water. As a result, you should get a homogeneous paste. Apply this mixture to a piece of soft cloth and wipe the touch screen with it. You can use a damp cloth to remove any remaining product.

During the process, it is important to ensure that the rag used to remove excess soda is only slightly moistened with water. Excess fluid can cause other, more serious problems.