Where is the micro SIM card inserted into the Samsung 19100. Installing a SIM card on the Samsung Galaxy S7

Cell phones samsung galaxy S7 and Galaxy S7 Edge work with Nano SIM cards. Therefore, if you bought this device to replace an outdated mobile phone, you will most likely need to change your SIM card at a customer service point or give the card the desired format yourself. Many users choose the second option, since contacting service center may be associated with certain difficulties. Consider how to cut and install a SIM in a Samsung Galaxy S7.

Procedure for cropping sims for Galaxy S7

NanoSIM is a relatively new format for SIM cards. It first appeared in the iPhone 5 and is still used in all Apple devices. A little later, smartphones from the Samsung Galaxy line began to be equipped with Nano-type cardholders. This approach has reduced the size mobile devices and make them more user-friendly.

If your previous gadget worked on a Mini- or Micro-SIM, then before inserting such a SIM card into the Samsung Galaxy S7, it must be cut correctly. To perform the upcoming work, prepare the following tools and materials:

  • template for cutting (it can be downloaded from the Internet and printed on a printer);
  • thin scissors or clerical knife;
  • scotch;
  • thick cloth or fine-grained sandpaper.

The procedure for trimming a SIM-card to Nano format is as follows:

NanoSIM-card is ready for further use.

Installing a SIM card in a Samsung Galaxy S7

Installing a SIM-card in the Galaxy S7 is done in the following sequence:


When cutting a SIM card yourself, there is a small chance of damage to its microcircuit. Therefore, if the smartphone does not want to accept the card in any way, replace it with a new one at the customer service center of your operator.

Complain about content

Inserting a SIM card into a smartphone seems to be a fairly simple action that does not require special skills, but not everyone can immediately figure out where the connector is located, what format card can be used and which side to insert it. In this short article, you can find answers to these questions, which probably torment some owners of the Samsung Galaxy A3.

Each modification of this model has a special holder for SIM cards, which can be removed using an ejector (clip) that comes with the smartphone. The Samsung Galaxy A3 2015 has two trays, and they are both on the right side panel, where, in fact, the power button is located. The lower one is intended exclusively for the main SIM card, and the upper one can be used for a second SIM card, or for a microSD card. Modifications 2016 and 2017 are equipped with one holder. The first has it in the same place as the A3 2015, and the second has it on the frame at the top. It can accommodate either two SIM cards, or a SIM card and a memory card. All three variants of the model are “sharpened” for working with nanoSIM. It is best to use a SIM card of this format, issued by the operator, and not cut off on your own.

How to insert a SIM card in Samsung Galaxy A3

  1. Gently insert the ejector into the hole in the holder and press lightly. If everything is done correctly, the tray should move out of the compartment.
  2. Grab the holder with your fingers and pull it out completely.
  3. Place a nanoSIM SIM card in it and insert it into the compartment. Be careful not to mix up the sides, otherwise you may damage the compartment or holder.
  4. Place the holder back into the compartment.

How to get a SIM card from Samsung Galaxy A3

  1. Insert the included paper clip into the hole in the tray and apply some pressure.
  2. Carefully remove it from the compartment. This is best done with your fingers.

When developing the Samsung Galaxy S6, the Korean manufacturer decided to abandon metal and leather-like plastic in favor of an aluminum frame and a glass back panel. As a result, the smartphone turned out to be quite attractive and began to really look like a flagship device, and not like a cheap Chinese something. Since the body of the phone turned out to be monolithic, the engineers had to move some elements that could be accessed in previous flagships simply by removing the cover. So, the SIM card slot moved to the side panel under the power button and got a tray. Unfortunately, not everyone who wants to buy the Samsung Galaxy S6 knows about this move. Therefore, we devoted this short article to the question: how to insert a SIM card into the Samsung Galaxy S6.

How to insert a SIM card into a device

The SIM holder can be found on the right side of the mobile device through a small hole. To insert a SIM into it, you must do the following:

  1. Find an ejector, commonly referred to as a paper clip. It is usually included as standard with a smartphone.
  2. Insert it into the hole and slightly push it inward.

    Inserting the ejector into the hole of the SIM holder: try to do it as evenly as possible

  3. Carefully pry up and remove the holder.
  4. Place a nanoSIM SIM card in it. It is advisable to use a card issued by the operator, and not cut off on your own, so that there are no conflicts between it and the smartphone in the process.

    Correct placement of nanoSIM in the holder

  5. Place the holder in the compartment so that the hole in the "ear" of the tray is near the power button.

How to remove the SIM card from the device

  1. Insert the ejector into the hole in the tray and push it inward.
  2. Carefully remove the tray with the SIM card and take it out.

Replacing the Samsung Galaxy S4 SIM card is a task that seems difficult and overwhelming, given the new MicroSIM standard used in phones of this model. Users who are used to solving communication problems by rearranging the SIM card, as well as retrogrades who change the operator or phone number by purchasing a completely different card, are confused when faced with this problem. We will teach you how to remove and insert a Samsung C4 SIM card at home.

Instruction

This guide consists of five steps. You will need a special plastic spatula, long nails or some kind of comfortable and soft thin object with which you can pry some details.

Step 1: Pry off the left edge of the Samsung C4 back cover with your fingernail or spatula. A special connector for this is located at the level of the main camera and the power control button.

Step 2: Insert a plastic spatula into the gap that has now formed and move it from left to right, opening the latches in sequence (these latches are located around the entire perimeter of the inside of the phone case). At the moment when the back cover has completely moved away from the case, remove it and set it aside.

Step 3: Taking off back cover, be sure to remove the memory card from a special slot located directly under the main camera of the device:

  • Gently press down on the edge of the memory card until you hear a click.
  • Remove the spatula or finger from the card - a click preceded the automatic ejection of the memory card with its locking tray.
  • Once this has happened, remove the memory card and carefully place it in a place where it will not get lost.
  • When assembling the Samsung S4, insert it in reverse order.

Step 4: Pry off the phone's battery, remove it and set it aside.

Step 5: To remove the Samsung Galaxy S4 SIM card, push it inward, as you did with a memory card:

  1. You need to press it gently and until a click is familiar to us.
  2. When you hear a click, release the holder so that it can automatically pull the tray out of the slot.
  3. When the SIM card tray has appeared completely, it's time to remove the SIM card from it.
  4. Now you can insert another card into the slot and put the phone back together.

As you can see, MicroSIM is no more difficult to handle than the most ordinary SIM - there was nothing to be afraid of!

Most manufacturers of modern phones are gradually abandoning SIM cards of the old Mini-SIM format. They are being replaced by compact Micro- and Nano-SIMs. This approach allows to reduce the size of mobile devices and make them more convenient to use. In this aspect, Samsung did not invent anything new and equipped its Galaxy A5 smartphone with a Nano SIM card slot. And if you decide to purchase this device to replace an outdated mobile phone, be prepared for the fact that you will have to cut the card you have on hand. Let's figure out how to correctly insert a SIM card into the Samsung Galaxy A5.

Specific features of the SIM slot in the Galaxy A5

To date, there are several modifications of the Samsung Galaxy A5 smartphones. They differ from each other not only technical specifications, but also the location of the SIM card slot and its capabilities:

  • Galaxy A5 phones released before the beginning of 2016 have two connectors. The first is for installing Nano-SIM. The card placed in it will be defined by the system as the main one. The second tray is hybrid, that is, you can insert either a second SIM card into it, or expand the memory using Micro SD. Both card readers are located on the right side of the mobile phone.
  • Gadgets of the 2016 model have one hybrid connector located on the right side of the device under the Power key. As in the first case, you can install two Nano-Sim or SIM + Micro SD into it.

  • New modifications, which were released in 2017, are equipped with two slots. The first (main), located on the left side of the Samsung, accepts Nano cards. The second tray is located on the upper end and is complex. Thanks to this approach, it will be possible to simultaneously place two SIM cards and Micro SD memory in the phone.

In all modifications of the Galaxy A5, the connectors are opened using a metal ejector that comes with the device. However, in its absence, you can use an ordinary brace, after unbending one of its ends, or with a needle.

Cutting SIM-card for Samsung Galaxy A5

If you have a Mini or Micro SIM card on hand, you will need to cut it to Nano format before installing it. Here you need to choose one of three options:

If the third option was chosen, you will need the following tools and materials to complete your plan:

  • b/w or color printer;
  • sharp knife or scissors;
  • sandpaper;
  • A4 clean sheet;
  • cutting template;
  • adhesive tape or PVA glue.

The sequence of work will be as follows:


SIM-card can be inserted into the phone.

mob_info