Karaoke on a laptop without a microphone to sing. Connecting a karaoke microphone to a laptop via a cord, tips and nuances
A modern laptop is equipped with a built-in microphone. It allows you to communicate freely in social networks, video chats, record audio recordings. Sometimes it happens that the microphone is broken or the recording quality is poor. How to connect a microphone to a laptop for karaoke or regular: the answer!
A modern laptop is equipped with a built-in microphone. With it, you can freely communicate in social networks, video chats, record audio recordings. Sometimes it happens that the microphone is broken or the recording quality is poor.
How to turn on the microphone on a laptop
If your recording device does not work, you do not need to rush and run to the store for a new one. Perhaps the equipment is simply disabled, you need to check this in the settings. To do this, right-click in the notification area and launch the recorders. Find the microphone in the recording tab and run the properties.
In the "use of devices" column, make sure that the equipment is used.
In the “levels” tab, set the maximum signal reception value. Then save all settings and try to test the device. If the microphone is not in the list of devices, then you need to install new drivers for sound card and built-in camera. If this does not help or you are not satisfied with the recording quality of standard equipment, then you need to install an external device.
How to connect a microphone to a laptop
Regardless of which model of the recording device you purchased, if it has a standard 3.5 jack output, then there should be no problems if you can use adapters. Typically, a laptop has a separate connector for the device, it can be green or pink, if there is an output, then just insert the plug.
If the microphone does not work, then try turning it on as described in the instructions above. Also double check your sound card drivers. Some laptop models have only one input, which is for both headphones and a microphone. In this case, to connect an external recording device, you will need a special adapter or headset.
Sometimes the built-in sound card can work poorly or even fail. There is an output, you can connect an external sound card that connects to the USB connector. It is worth noting that the more expensive the equipment, the better the sound recording will be.
Usually, drivers are built into the external sound card, which are installed themselves when connected to a laptop. There are two connectors on external equipment, one for headphones, the other for a microphone. You can also use a headset to record sound, which does not require an external sound card and an adapter.
With the spread of the Internet, many users have appreciated its advantages in the field of communication with people who live far away, all over the country or even the world. E-mail, ICQ, Skype are comfortable means of communication. And if the first two support mainly text-based communication, then with the support of Internet telephony it is allowed to use voice or even video communication, but in order for your interlocutor to hear you, you need a microphone. If you have a karaoke microphone at your disposal, you can use it.
You will need
- – adapter “jack to mini-jack”.
Instruction
1. Let's start with the fact that all modern laptops and netbooks have a built-in microphone, you just need to activate it in the system settings. If it is broken, or you have tasks that require an external microphone, follow the instructions below.
2. All laptops have a headphone and microphone input, to save space they are often combined in one socket, and switching is done mechanically, depending on the connected device. Look for a round hole on your laptop, next to which is a microphone icon or headphones and a microphone through a line. This connector is an ordinary 3.5 mm mini-Jack and is located on the side or on the back of the laptop case.
3. A typical karaoke microphone has a Jack output plug, but unlike the laptop input, its size is not 3.5 mm, but 6.3 mm. It is obviously larger, and without additional accessories it will not be possible to connect it. In order to combine devices, you will need an adapter from jack to mini-jack. It is a plastic or metal cylinder, on one side of which there is a hole for Jack 6.3 mm, and the other side ends with a mini-Jack 3.5 mm plug. Similar adapters are available at radio parts stores, audio hardware stores, and some computer stores.
4. After receiving the adapter, it is allowed to start connecting the microphone. Insert the microphone plug into the adapter socket, connect the resulting bundle to the laptop microphone connector. If your computer has an operating Windows system 7, after connecting, it will notify you to connect the device. Windows XP, when connected, does not display any notifications.
5. After connecting the microphone and laptop, you need to make sure that the microphone input is energetic. Enter the system mixer by double clicking on the volume icon next to the clock. In the microphone field, check if there is a checkmark in the "Off" box. If so, remove and set the volume control to the desired tier. Also check the switch on the microphone itself, if necessary, move it to the “ON” position.
Despite the fact that today the Internet is increasingly associated with the sphere of fun, it still remains a comfortable and powerful means of communication that allows you to connect people in various parts of the world. Skype and similar programs not only completely replace long-distance telephone communications, but also allow you to conduct video conferences - you only need access to the network. And in order to use these benefits of civilization, the computer must be taught to speak and see, that is, connect a microphone and a webcam to it.
You will need
- a computer;
- microphone;
- sound card.
Instruction
1. To connect, we need to make sure that the sound card installed on the computer and the corresponding microphone jack are working. The sound card can be either built into the motherboard or installed in a separate slot. We are looking for three multi-colored inputs for a jack connector on the back of the system unit.
2. As usual, installation of special drivers for the microphone is not required. After connecting the microphone to the appropriate connector on the sound card, go to the Panel Windows controls to the properties of the overall system volume mixer.
3. If we have Windows XP, select "Additional devices" and in the list that appears, check the box opposite the "Microphone" device. In Windows Vista, for the settings options, select "Recording Devices". If the probabilities of the sound card allow, an additional option “Gain” will appear in the settings, by means of which it is possible to compensate, say, a large distance to the microphone.
4. With a positive installation and microphone connection, we will immediately hear a personal voice in the computer speakers. If desired, it can be recorded with special programs for working with sound. We have successfully connected the microphone to the computer. It is now permitted to use the means of voice communication, Internet calls and other conveniences that the global network offers today.
Related videos
Note!
If the microphone is not prepared for connection to a computer and has a non-standard input for a computer, you will have to purchase a mixer.
The favorite pastime of many - karaoke - is easily unbelievable without a great microphone. It is he who, together with the speakers of the speakers, conveys all the beauty (if any) of the vocalist's voice.
Instruction
1. Locate the audio inputs on your home receiver. Most receivers have inputs on the front and back. Traditional 1/4 inch or 1/8 inch stereo input (headphone jack). Use this socket if available. Instead, locate the most easily accessible RCA input.
2. Identify the plug on your microphone. Most microphones have a 1/8" plug similar to what you would see on headphones.
3. Count the stripes on the plug. Plug with two black stripes - stereo (left and right channels). The three black bars represent mono (one channel).
4. Determine the adapter's requirements. If the plug microphone has two bands and the same size as a karaoke receiver jack, you don't need any adapters. Plug the microphone casually into the audio inputs of the karaoke receiver. The "Tips" segment below contains a layout of the general adapter combinations.
5. Connect the input channel on your receiver. Typically, the front headphone jack is labeled “Aux”. When you hear a sound in the karaoke speakers, it means that you have found the right channel.
Related videos
New laptops, in comparison with old computers, in addition to more strong technical collations, have one significant advantage - the built-in microphone. Previously, you had to purchase it separately. It could be damaged, lost, take up extra space, etc. All this is in the past. But it happens that the built-in microphone not enabled by default. This snag is easily dealt with.
Instruction
1. Check if your laptop has a built-in microphone. As already mentioned before, modern laptops come with built-in microphone ami, but this check will not be superfluous. Suddenly you have some special model. View documents for your laptop. There must be an indication of its configuration. Another option: if your laptop has a webcam, then the built-in microphone should be right. You can also see its presence through Device Manager.
2. Go to the start button menu. Select "Control Panel". In the window that appears, select the "Sound" section. A window will appear. In it, select the "Record" tab in order to enable the built-in microphone. If it is present on your personal computer, then it will be displayed in the device list. Click the Properties button. The window that appears should indicate whether the built-in microphone .
3. Check the audio transmission tier microphone a. It is possible that he is energetic and working, but tuned for a hefty quiet broadcast. Increase the sensitivity of your device. Go to the "Control Panel", find the "Sound" icon and double-click on it with the left mouse button.
4. Discover microphone in the device list. Click on it with the right mouse button. A context menu will appear. Select "Properties". Find the items "Allow applications to use the device in exclusive mode" and "Give priority to applications in exclusive mode." To connect the built-in microphone, set the highest sample rate and bit depth. Apply metamorphosis.
5. Test microphone. If you can hear perfectly, then you have everything set up correctly. If not, then try to change the settings in the "Enhancements" tab, which you can also find in the properties microphone a. If this did not help, then, most likely, it's a factory malfunction. Describe the problem and use the warranty repair service at the service center.
Connecting a mixer to a laptop is not a primitive task. It's one thing to connect a wire to two connectors, it's another thing to prefer a suitable sound card, which you will definitely encounter if you continue to play music.
You will need
- – a set of wires for connecting the mixer to a laptop, on one side of which there should be a “jack” plug.
Instruction
1. Make sure your laptop has the correct drivers for the sound card. If necessary, update them so that they work correctly, otherwise tasks may appear with the connection of the mixer. Locate the audio output connectors on the laptop, usually they are marked with an icon depicting headphones.
2. Take a connection cable with a jack plug and connect one end of it to the audio output of the laptop's sound card, and the other to the mixer. It’s cooler than everyone to use the cable option, where the connection is made using 2 wires combined into one “jack” from the other end.
3. If you have a wire that has a jack plug on one side and tulips on the other, connect the first one to the connector on the video card, and the second to the corresponding audio input ports on the mixer. Be careful, follow the color scheme for connecting wires. You can also use special adapters that you can buy in radio equipment stores in your city.
4. Buy a specific external sound card for your laptop if you want to get the best sound from your mixing console. Check out their range on specialized sites and look at the reviews of users who have already bought one or another model.
Note!
Keep in mind that standard sound cards, exclusively those built into the motherboard (many laptops only have such sound adapters), will not give you great sound. You can read information about professional sound cards at the following links: http://www.stereohead.ru/index.php?name=Pages&op=cat&id=10, http://www.computerra.ru/terralab/multimedia/357747/ , http://www.n-audio.com/news/new7.php.
Useful advice
Get high-quality sound cards.
Tip 6: How to activate the microphone in headphones with a microphone
Telephone- microphone Headset (TMG) looks like ordinary headphones, but has a side movable element, at the end of which there is a microphone. It connects to the computer's sound card with two cables.
Instruction
1. Check if the telephone and microphone headset is properly connected to the computer. On the sound card, the microphone jack is pink and the headphone jack is green. For headsets, the microphone plug can be pink or red, and the headphone plug can be black, green or white. Occasionally, they do not differ in colors at all, but have stylized microphone and headphone designations. Finally, if they do not have any designations at all, it is possible to distinguish them implicitly: at the microphone plug, the middle and universal contacts are made as a whole or are electrically interconnected (the latter can be determined using an ohmmeter - the resistance should be close to zero). Do not plug a microphone plug into any of the card's output jacks as this will cause a short circuit on the right channel and risk damage to the amplifier.
2. Having positively connected the headset, turn on the computer, wait for the operating system to load, put on the headphones and say something into the microphone. If you hear a personal voice, the connection can be considered completed.
3. If the headphones are working, but the microphone is not, run a program that allows you to change the ratio between the tiers of signals coming from different sources. In Windows, it is called, depending on the version, "Volume" or "Volume Control" and is located in the "Typical" - "Fun" menu section. In Linux, it is called "KMix", "Mixer", "Sound Mixer" or similar, and is located in most distributions in the "Multimedia" menu section.
4. Find in the program an imaginary regulator that allows you to adjust the level of the signal coming from the microphone. If there is no such control, enter the program settings mode (the method of entering this mode depends on the OS) and turn on the display of this control. Next to it there is a checkbox, which in some versions of the program turns on the microphone, and in others it turns it off. Make the microphone input on, then set the slider to the desired level of the signal from it. Don't make it too big, otherwise it will distort. Later, check again if the microphone is working.
5. If you do not already have Audacity or a similar program on your computer that allows you to record sound files, install it. Record your personal voice and then listen to the recording. The sound should be sound, approximately without distortion.
Related videos
Related videos
If you and your friends love to sing karaoke, then your company doesn't need to buy a dedicated music system. Surely you have a personal laptop, so we will sing along with it.
In order for karaoke to work from a laptop, you need to buy good wired speakers. And you can also wireless, which are paired with a special radio transmitter that plugs into a household outlet. And you also need to change the standard laptop sound card to a new one that supports the Karaoke function. You will also need a microphone. It is better to take it without wires, the so-called radio microphone - with it you can not only sing, but also jump around the room to incendiary music. If possible, buy an electric microphone. It, unlike dynamic, has a built-in amplifier that provides better sound quality. Such a microphone will cost more, but you will feel like a real Basque or Glucose.
It's good that today you can easily do what you want. Want to sing? Have a laptop? Wonderful! Invite your friends and have fun!
Karaoke is a great way to spend time or entertain a friendly company. But not everyone knows that for this it is not at all necessary to have special multimedia equipment, a CD with songs and other accessories.
This article tells you how to make karaoke on a laptop or desktop computer if you do not have one or another component.
In order to make karaoke on a computer, you will need:
Microphone
If you have a microphone that comes with music centers or karaoke sets, then it has a connector different from the sound card. The socket in the computer is designed for a 3.5mm jack. In this case, you need to buy a special adapter from 6.3 mm to 3.5. It can be found at any hardware store and is inexpensive.
Cable (jack from 3.5 mm to "tulips")
Acoustic system
Next, you need to decide on the source of the sound. You can, of course, use speakers in a laptop, but for the best effect, sound and volume, it is advisable to use at least computer speakers. The best option would be columns from music center and subwoofer. To connect them, you will need a cable or a jack adapter from 3.5 mm to "tulips".
The end with tulips is connected to the music center in the AUX connectors, and the opposite one is connected to the green connector of the sound card, which is used for headphones.
Connecting speakers without a music center is a more difficult task. To do this, you will need to purchase an amplifier or receiver (which is the music center itself).
After connecting the microphone and speakers, check their compatibility. To do this, right-click on the volume icon in the Start panel. From the context menu, select "Playback Devices" to test the speakers and "Recording Devices" to test the microphone. In the properties of each, you can test the performance and adjust the sensitivity level.
The best karaoke programs for your computer
When the whole technical component is ready, go to karaoke. If you have a special disc with a collection of songs and a program, then everything becomes easier. Insert the disc into the drive and run.
If you do not have a disk or there is no disk drive, it does not matter. On the Internet you can find many programs and online karaoke. The most popular is www.karaoke.ru. On it you can create your own library with your favorite songs and keep track of new ones. This is a great option for those who decide to have fun and sing to their heart's content.
However, there are karaoke programs with many settings: background, sound effects, creating your own compositions, etc. for example, the KaraokeKanta Player or Vocal Jam utility. The first - with great functionality and is very popular in the West, the second - is simpler and completely in Russian.
After making all the settings, test the entire system and adjust the sensitivity as you wish. In such a simple way, with a microphone, you can turn an ordinary laptop into an entertainment center.
With the spread of the Internet, many users have appreciated its advantages in the field of communication with people who live very far away, all over the country or even the world. E-mail, ICQ, Skype are convenient means of communication. And if the first two support mainly text communication, then using Internet telephony, you can use voice or even video communication, but in order for your interlocutor to hear you, you need a microphone. If you have a karaoke microphone at your disposal, you can use it.
You will need
- - adapter "jack to mini-jack".
Instruction
You will need
- a computer;
microphone;
sound card.
Instruction
- How to connect a microphone to a computer
- how to connect iphone headphones to computer
