e running Android

There are many ways to obtain superuser rights (ROOT rights), but most of them require enabling USB debugging mode. You can find out what USB Debugging mode is and how to enable it in this article.

So, the first question is: what is USB Debugging mode required for?

USB debugging is used to enable the user to use the service for debugging applications and devices on the Android operating system (in other words, checking the operation of applications and the system as a whole, possible failures and much more), which is called A.D.B..

The second question is more interesting: how to enable USB debugging?

In all Android devices, regardless Do you have a smartphone or tablet, USB debugging mode can be found in this path: Menu -> Settings.

But, despite the fact that the USB debugging mode is in the settings, the location of this option may vary on different devices, so it is worth describing 5 possible options for the location of the USB debugging mode.

How to enable USB debugging: option #1.

Go to: Menu -> Settings -> Development -> USB Debugging – check the box next to this item.

How to enable USB debugging: option No. 2.

Go to: Menu -> Settings -> For Developers ->

How to enable USB debugging: option No. 3.

Go to: Menu -> Settings -> Applications -> Development -> USB Debugging (this option is more relevant for devices running Android 2.2 -3.0).

How to enable USB debugging: option No. 4.

Go to: Menu -> Settings -> More -> Developer Options -> USB Debugging - check the box next to this item.

How to enable USB debugging: option No. 5.

This option is suitable for devices running Android 4.2 and higher.

Go to: Menu -> Settings -> System -> About smartphone e (Tablet) -> Look for the “Build number” item and click on it approximately 7-10 times, then go back to Settings -> For Developers -> And check the box next to USB Debugging.

Further, read only by those users who have devices running Android 4.2 and higher.

After you enable USB debugging mode and connect your device to a computer or laptop for the first time and enter any of the commands, or start getting ROOT rights, you should see a window asking you to trust this computer, which is currently your device is connected. This message will appear every time you connect your device to a new computer or laptop. You should check the box next to “Always allow debugging from this computer” and click on the “Yes” button. After this, you can obtain ROOT rights and perform other actions that require you to enable USB debugging mode.

What to do if you have enabled USB Debugging, but the device is still not detected?!

The first thing you need to pay attention to is the presence of installed drivers on the connected computer or try to update (reinstall) them. Also, the most common mistake made by users is that the device is in a locked state at the time of connection, so it is worth unlocking it. Attention!!! For correct operation, USB ports version 2.0 should be used; USB 3.0 ports are not recommended for such operations.

If you did everything correctly, but you were still unable to establish a connection with the computer, then you should try changing the method of connecting to the computer. To do this you need to: connect the device using a USB cable to the computer, and then smartphone e or On the tablet, click on “USB Connection” in the retractable curtain and select PTP mode in the window that appears.

If you do not have a USB cable at hand, but you can connect using Wi-Fi, then the following instructions will be useful for you.

So, the first thing you have to do in order to activate the connection of your device via a Wi-Fi network is to obtain the IP address and port of the device (ROOT rights are required for this operation), this can be done using the program ADB Wireless, which can be downloaded from Google Play absolutely free.

After launching the ADB Wireless application, you need to click on the red button, which will later turn red, and wait until the connection occurs. Below you will see information in the form adb connect (your IP address).

After completing all the manipulations, we can consider the connection to Android successful, which allows us to use the commands in the future adb.

How to enable USB Debugging on an Android smartphone or tablet

The Android operating system is very tricky. By default, it does not allow you to perform any special actions with it that lead to serious changes. In particular, by connecting the device to a computer via a USB cable, you can only transfer images, music and videos, while at the same time recharging the device a little. The system will not allow you to do anything more. This can be fixed by activating USB debugging mode. In this material we will tell you how to do this.

In fact, this mode allows you to download absolutely any files to your smartphone or tablet if the connection is made via USB. As a result, this contributes to a wide variety of changes to the operating system. Without activating the debugging mode, it is impossible to imagine customizing the installed software. What can I say, without this you won’t even be able to install a program downloaded from a third-party resource...

In general, USB debugging mode paired with one or another computer utility allows you to do the following:

• Send absolutely any file from PC to smartphone;
• Flash the device;
• Make a backup copy of the applications available on the device;
• Restore the functionality of the smartphone;
• Get root rights;
• Install an application downloaded from a third-party resource;
• Copy any folder from the device's file system.

Google positions debug mode as a feature useful for developers. But we understand that enabling USB debugging mode on Android also makes sense for the average user. It remains to figure out how to do this.

Enable USB Debugging

We will show how to activate the mode using the example of pure Android 5. If you have a different version of the operating system, and also have some proprietary shell installed, then your actions may be slightly different. But not radically - the basic principle will remain the same.

So, you need to perform the following manipulations:

Step 1. Go to " Settings».

Step 2. Scroll almost to the bottom of the list. Here click on the item “ For developers».

Step 3. In this section you need to activate the switch near the item “ USB Debugging».

It is possible that you will first need to activate the main switch located at the very top.

Enabling Debug Mode on Samsung Products

This is how easy it is to turn on debugging mode on most smartphones. But on some devices the developer mode is hidden. For example, this is observed on the Samsung Galaxy Note 10.1 2014 Edition tablet and other South Korean gadgets. Here you need to use another method:

Step 1. Go to " Settings».

Step 2. Proceed to the section " About the device" If necessary, visit the tab " Are common».

Step 3. Click on the item " Software details" This must be done on the Android 6.0 operating system. On older versions of the operating system this item may not be available.

Step 4. Pay attention to the point " Build number" You need to quickly press it with your finger about 7 times. This will activate developer mode, which the system will immediately notify you about.

Step 5. Now go back to the main menu " Settings" You will find the item that has just appeared “ Developer Options" Click on it.

Step 6. Click on the checkbox next to “ USB Debugging».

Step 7 Confirm your actions by pressing the button " OK».

On devices running Android OS, access to any actions that make changes to the system is hidden by default. For example, by connecting your smartphone to a PC via USB, you can perform simple steps to transfer images, audio or videos. Now we will tell you how to expand the capabilities of the gadget, i.e. how to enable usb debugging on android.

To summarize, we can say that without enabling USB debugging, it is impossible to perform the following actions:

• Restore normal operation of the device.
• Get Superuser rights (ROOT).
• Install a program that was downloaded from a third-party resource.
• Flash a smartphone or tablet.
• Send any file from your computer to your Android gadget.
• Make a copy of any folder from the smartphone’s file system or a backup copy of the applications on the device.

The debugging mode is aimed primarily at developers, but, taking into account the above, we can conclude that the average user also has to resort to this tool in certain cases.

How to enable USB debugging mode on Android

Even though activating this option is not difficult at all, users have trouble finding its location. Below we will look at the possible options.

On Android versions 2.3

To activate debugging, go to “ Settings", open the section " Applications", find the item " Development" and in it, opposite the line " USB Debugging» put a tick. When prompted by the system, press the button “ Yes", ready:

On Android versions 4+

In this case also, through " Settings" In chapter " System"find the item " About the phone" and click " Version information«:

Next we find the parameter “ Build number" and make a few quick light presses on it until the message " You became a developer". Now, returning to the settings section " System"we will see that a new item has appeared - " For developers", click on it and opposite the line " USB Debugging» put a tick:

On some models of Android devices, when you connect your smartphone to your computer, the “ USB Connection Settings", then here you will also need to check the box " USB Debugging«:

When prompted by the system to allow debugging, confirm the action by clicking on the “ OK«:

On Android versions 5+

As in previous versions, the first step is to go to “ Settings", then go to the item " About the phone", find the line " Build number“, “tap” on it several times until a happy notification from the system appears below “ You have become a developer!". After this we return to " Settings" and click on the line " Additionally«:

We see that the menu " For developers", open it and set the slider in the line " to the active position USB Debugging"When asked to allow debugging, click the button " OK«:

On Android 6.0 versions

In conclusion, we bring to your attention a video tutorial on how to enable usb debugging mode on Android version 6:

And with this we say goodbye to a new topic, we hope that this material was useful to you and now you can confidently enable developer mode on your smartphone. Good luck!

In many instructions for obtaining root rights and modifying firmware, it is necessary to enable USB debugging and OEM Factory Unlocking. What is USB Debugging? You can find out why it is needed and how to enable it from this article!

What is USB Debugging used for?

USB debugging is used to use the service for debugging applications and changing device settings on Android OS (check how the application and the system as a whole work and what failures have occurred) using a utility called ADB.

What is OEM Factory Unlock?

Starting with Android 5.0, many manufacturers began to implement an additional security mechanism against unauthorized modification of system partitions. As a result, the “OEM Factory Unlock” function was introduced into the “Developer Menu” section; when activated, you will be able to flash third-party Recovery and custom firmware.

Do not confuse “OEM Factory Unlock” with Bootloader unlocking, which is required by many manufacturers - Xiaomi, HTC, Huawei, Google Pixel, Sony.

Android Developer Menu

“USB Debugging” and “OEM Factory Unlock” are all in one hidden section of Android settings called “ “. To see this section, you need to complete a simple activation procedure.

How to enable USB debugging?

In absolutely all Android devices, regardless of whether it is a smartphone or tablet, USB debugging is in Menu -> Settings.

Possible location options

Despite the fact that USB debugging is in the settings, the location options in the menu may be different and there may be several options for how to find it! Let's consider 8 possible options from new versions of Android to older ones.

Option No. 1 for Android 4.2 - Android 7.1:

Menu -> Settings -> About smartphone/About tablet -> Settings -> For Developers -> USB Debugging- tick.

Option No. 2.1 for Xiaomi (new versions of MIUI)

Menu -> Settings -> About phone->MIUI versionand click on it about 7 - 10 times, then return to Settings -> Advanced -> For Developers -> USB Debugging- tick.

Option No. 2.2 for Xiaomi (old versions of MIUI)

Menu -> Settings -> General -> About smartphone/About tablet ->Build number and click on it about 7 - 10 times, then return to Settings -> For Developers -> USB Debugging- tick.

Option No. 3 for Android 8.X and higher:

On Android 8.0 and newer, the settings have been slightly updated and now, to get to the developer menu and enable “USB Debugging” you need to: go to System -> About device (tablet/phone) -> Click 5-7 times on “Build number” and go back to the System section -> Developer menu.

For Android versions 1.6 - 4.2

Option #4:

Menu -> Settings -> Development -> USB Debugging - check the box

Option #5:

Menu -> Settings -> For Developers -> USB Debugging- tick

Option #6:

Menu -> Settings -> Applications -> Development -> USB debugging (Android 2.2 - 3.0)

Option #7:

Menu -> Settings -> More -> Developer Options -> USB Debugging- tick

Option No. 8 for Android 4.2 and higher:

Menu -> Settings -> System -> About smartphone/About tablet -> Build number and click on it about 7 - 10 times, then return to Settings -> For Developers -> USB Debugging- tick

[collapse]

After enabling USB Debugging, authorize the computer! (For Android 4.2 and above)

When connecting to a computer for the first time and entering some command or getting Root rights, you will have a request for trust the computer to which Android is currently connected! This request will appear on any new computer or laptop! Check the box and press OK button.USB debugging is enabled.

USB debugging enabled and Android device
not determined?

First what you will need to believe is this availability of installed USB drivers to your computer or reinstall/update them. Another problem, because Android is not detected - it is in locked state! Unlock your smartphone or tablet! Don't use the port USB 3.0 only USB 2.0.

If you still cannot install USB debugging with your computer, then you should try changing the method of connecting to the PC. When you have already connected your smartphone or tablet to your PC, pull the top information bar “curtain” down -> select USB connection and activate PTP mode.

If you want to connect via WI-FI

After you have enabled this option on Android, you can connect your smartphone to your PC and enter the necessary adb commands or get Root rights!

Do you still have questions? Write them in the comments, tell us what you did or vice versa!

That's all! Read more useful articles and instructions in the section. Stay with the site, it will be even more interesting!

USB debugging mode is a feature of the Android operating system that is designed for application developers. However, quite often it is also necessary for ordinary users. Typically, the need to enable this mode appears when installing non-original firmware or backing up data.

In this article we will look at two ways to enable USB debugging mode on an Android phone or tablet. The first method is the main one; it works on most modern devices. The second method will be relevant for devices with older versions of Android.

Basic Method to Enable USB Debugging Mode on Android

First, we will describe the main way to enable USB debugging mode on Android. This method works on all Android devices with Android versions such as 4.0, 5.0, 6.0 and 7.0. If you have Android with the original shell from Google, then you will have everything as in the screenshots below. If you have a different shell, for example, a shell from the manufacturer, then there may be slight differences. But, in general, everything is almost the same.

Step No. 1. Enable developer mode.

So, in order to enable USB debugging mode on Android, you first need. To do this, open the Android settings, scroll to the very end, and open the “About phone” section there (or the “About tablet” section if you have a tablet computer and not a phone).

After opening the “About phone” section, you need to scroll through all the settings again to the very end. There will be a line called "Build Number". In order to enable developer mode, you need to quickly click several times in a row on the line with information about the build number.

After 5-10 quick clicks, a message will appear stating that you have become a developer. This means that a “For Developers” section has appeared in the settings and you can now enable USB debugging mode.

If developer mode has already been enabled, then you will see a message that “you are already a developer” and you do not need to enable anything, this also means that the “For Developers” section is active and can be opened.

Step #2: Enable USB Debugging Mode.

Once developer mode is enabled, you can proceed to enable USB debugging mode. To do this, return to the main Android settings menu and scroll to the very end of the list. Now, next to the “About phone” section, the “For Developers” section should appear. It is in this section that the USB debugging mode is located, so feel free to open it.

In the “For Developers” section, you need to scroll through the settings a little in order to get to the “Debugging” block.

Here, at the very top of the “Debugging” settings block, there will be a function called “USB Debugging”. Turn it on and debug mode will work.

Enable USB Debugging Mode on Old Versions of Android

If you have an Android phone with an older version of Android, for example, Android 2.0, then in your case the USB debugging mode will be enabled in a completely different way. In older versions of Android, to do this, you need to open the settings, go to the “Applications” section, and then open the “Development” section.

After this, you need to enable USB debugging and confirm the change in settings by clicking on the “Yes” button.