How to play on a computer with a ps3 gamepad. Which gamepads are suitable for PS3

What is more convenient for games: a game console or a computer? This is an age-old question that worries most gamers. But, basically, the difference lies not in the hardware of these two devices, but in the control method. For a computer it is a mouse and keyboard, and for a console it is a joystick. Recently it became possible to connect a keyboard and mouse to consoles, but is it possible to do the opposite and connect a joystick to a computer? Yes, and this is good news for all gamers, because now you can choose the control. So, let's figure out how to connect a PS3 joystick to a PC.

Are adapters needed?

The standard joystick has two connection types. It can be connected via a USB cable or via Bluetooth. For most users, a wireless connection is naturally much more convenient. However, for this you need to make sure that the joystick is always charged.

If you want to use a wired connection, all you need is the standard USB cable that came with your DualShock to charge it.

Wireless connection requires Bluetooth. Fortunately, modern computers are sold with the corresponding module already installed. But if your PC is old or you build it yourself, you won't have to spend too much money. The module is quite cheap, and installing it is not difficult.

Neither in the first nor in the second case, you will not need to look for any additional equipment or non-standard adapters. Everything is very simple.

DualShock, like any peripheral, is installed in fairly standard ways. But the question is different. It is not enough to connect the device to the computer; you also need to install the appropriate driver. And this can already cause certain difficulties.

How to set up a joystick

Most PC users are accustomed to the fact that after connecting a new device, Windows automatically recognizes it and downloads the appropriate software from the Internet that is necessary to set up compatibility. Logically, this should work, but it's a little more complicated.

Console controllers require a more complex procedure. To configure the joystick, you will first have to download the MotioninJoy program, and only then connect the device.

This program is not relevant for the modern PS3 joystick. To connect the DualShock 3, you'll have to go a different route, but we'll talk about that later.

MotioninJoy is the easiest way to connect older joysticks to your PC.

First, download the program and select the port through which the controller will connect permanently. When changing the port, the procedure must be repeated from the beginning.

Connect the adapter to the selected connector. Go to MotioninJoy – Driver Manager. There, from the list of available ports, select the one that is used to connect the joystick - you need to tick it. Start installing drivers by clicking Load Driver. When the process is complete, restart your computer.

If the connection will be made via Bluetooth, you need to do the same, just select the BluetoothPair tab. Once the connection setup is complete, the DualShock will vibrate.

But if you have a very old version of the joystick, there may be no vibration at all. Therefore, you will have to check the device in the game.

How to connect DualShock 3

The third version of the DualShock joystick has its own characteristics, so you need to connect it a little differently. Before connecting the device to the computer, you need to download not the previously named program suitable for previous versions, but the driver package for Sixaxis.

This is the name of the family of controllers that the DualShock 3 belongs to. It is very important to consider the bitness of the operating system in order to download the appropriate driver. For example, for Windows x64 only a 64-bit driver is suitable.

You need to download the archive with the driver to your hard drive, and then extract all the files from it. There you will find an installation file, you need to run it and install the program.

Among other things, there will be another archive file called BtSix. It also needs to be unpacked to any location on the disk.

Open the PPJOYb file and run Config Joysticks. Then you add a new object through the Add tab and label it as you wish.

The program can be closed. Now connect the joystick to your computer and check if it works correctly in games.

Additional synchronization may also be required to prevent connection dropouts.

To do this, you need to connect the controller via cable and wait for the driver update. Then launch the previously saved BtSix and click Address.

To ensure stable operation in Bluetooth mode, turn on the joystick and the BtSix program, and then press the center button of the gamepad.

How to connect a PS4 joystick to PC

The latest version of the PS game console comes with the fourth version of the proprietary gamepad. In the case of this device, the connection will also be slightly different.

You need to download a special program, InputMapper, which will allow you not only to connect the gamepad, but also to use all its new functions, including the touchpad and acceleration sensors.

The connection process does not require any special instructions, because the program does not require additional settings. Unless, if you want to connect the joystick via Bluetooth, you will have to switch it to “pairing” mode and hold down the “share” button, which in games usually means Back.

Wait until the LEDs start blinking and connect the device to your computer.

https://youtu.be/LjJNmbfPoQk

Well, connecting a PlayStation controller to a computer is not such a difficult task, regardless of which version of the joystick we are talking about. Now you can enjoy gaming with a controller even if you're using a PC rather than a console.

The PlayStation3 gamepad is a type of device that uses DirectInput technology, while all modern games that come out on PC only support XInput. In order for the dual shock to be displayed correctly in all applications, it must be configured correctly.

The dualshock supports Windows out of the box. For this purpose, a special USB cable is supplied with the device. After connecting to the computer, the drivers will be automatically installed and after that the joystick can be used in games.

Method 1: MotioninJoy

If the game does not support DInput, then for normal operation you need to download and install a special emulator on your PC. For dualshock it is best to use MotioninJoy.

Procedure:


With the MotioninJoy program, the dual shock can be used to run modern games, because... after connecting it to the computer, the system will recognize it as an Xbox device.

Method 2: SCP Toolkit

SCP Toolkit is a program for emulating a PS3 joystick on a PC. Available for free download from GitHub, along with source code. Allows you to use the dual shock as a gamepad from the Xbox 360 and is capable of working via USB and Bluetooth.

Procedure:


After this, the system will see the dual shock as an Xbox controller. However, it will not be possible to use it as a DInput device. If you plan to run not only modern, but also old games with gamepad support, then it is better to use MotionJoy.

A PS3 gamepad can be connected to a computer via USB or Bluetooth, but only to run older games (that support DirectInput). To use the dual shock in more modern editions, you need to download and install special software to emulate the Xbox 360 gamepad.

Gamepads from Play Station 3 feature DirectInput technology. However, most modern games use XInput technology, which can lead to certain problems. DualShock technology is used to correct possible problems, but in order for it to work correctly, it needs to be further configured.

What is DualShock and how to connect it

This technology supports working with Windows out of the box, meaning you don’t need to purchase anything additional to connect the joystick to your computer. The kit will include a USB cable for connecting to a computer. Drivers will also be installed automatically in most cases.

Option 1: MotionJoy

If the game does not support DirectInput technology, then it will be very difficult to play it normally using a gamepad. It is in such cases that it is recommended to download and install special emulators on your computer that are designed to solve the problem. If you are using a DualShock type connection, then it is best to choose the MotionJoy emulator.

The order of interaction with it is as follows:

  1. Launch MotionJoy from the Windows interface. During unpacking, you can change the installation path of the emulator, create or not create shortcuts for quick access. We will not dwell in detail on installing the emulator; the process here looks very standard.


  2. After installation, launch the program and also connect the controller to the computer via USB.
  3. First you need to install all the required drivers. Typically, Windows already installs them by default, but there are exceptions, so it would be a good idea to perform this action. Expand the tab "Driver Manager".
  4. Here you need to click on the button "Install all". Wait for the message to appear on the screen "Install completed".


  5. Now switch to the tab "Profiles".
  6. Pay attention to the title "Select one mode". Here, the choice of connection option depends on what games the joystick will be used in. If we are talking about old games, then it is better to choose "Custom-Default". If you need to launch games that are available for PS3, you can leave a checkmark on "DX-Default". Provided that you are running games that were also released for Xbox, but not for PS3, then use the "XInput-Default".
  7. After setting the settings, click on the button "Enable".


  8. To check the functionality of the gamepad, click on the button "Vibration Testing". If everything is fine, then the joystick should vibrate.


  9. When you need to turn off the joystick, use the button "Disconnect". It is also located in the tab "Profiles".

Option 2: SCP Toolkit

This program is hosted on the GitHub service and is open source, plus it is distributed completely free of charge. With its help, you can emulate a joystick from a PS3, thanks to which the computer sees it as a gamepad from an Xbox. This improves the Windows experience and reduces the likelihood of crashes. Also, this program can work not only with USB connections, but also with Bluetooth wireless connections.

The setup procedure is as follows:

  1. Download the program from GitHub. At the output you will receive an archive with files. You need to get and run the file called "ScpToolkit_Setup.exe".


  2. This file launches the program installer, where you need to select the path to the location to install it. You can leave it as default. The rest of the installation process does not take much time and does not require any action from the user.

  3. When installation is complete, click on the button "Run Driver Installer". This button is responsible for starting the search and installing the necessary drivers on the computer.

  4. Connect the controller via USB and wait for it to be displayed in a special window. When it appears there, click on "Next".


  5. Confirm all necessary actions and wait for the software to install. After this, you can launch the game and try to play using the joystick.


This solution has a serious drawback - it is too impractical to use for old games. Sometimes it may not work at all, but this problem usually only affects older games. If you need to be able to play both new and old games, then go with the first option.

The PS3 controller can be run on a computer via USB or Bluetooth connections. However, problems may arise when launching both old and new games, so it is recommended to use various emulators that solve these problems.

Gaming on computers and game consoles has become more convenient thanks to gamepads. Remote control allows you to relax and play in comfort. Players often wonder whether from PC to PS3 and vice versa. Next we will talk in detail about the correct connection. What information may be useful to the user in this or that case? What should you pay attention to?

Chances of connection

The first step is to figure out how realistic the task is. The main problem is that a computer and a game console are different devices that support peripherals.

A game joystick from a computer can be connected to a PlayStation 3. A gamepad from a console will, in some cases, work on a PC. Accordingly, there is always a chance for success. Especially if you give preference to joysticks from Microsoft.

Connection methods

There are several options for connecting gamepads. The success of the task often depends on this choice.

Today you can connect the joystick using a wire or a Bluetooth receiver. This applies to both working with a PC gamepad and when playing on the console component. Note that a wired connection is easier. sometimes they are not recognized by the game console or computer, so it is not always possible to connect them.

What you need to connect

The next important issue is collecting the equipment necessary for the procedure. Without it, it will not be possible to realize the idea. Fortunately, you will need a minimum of items.

How to connect a joystick from PC to PS3? For this you will need:

  • game console;
  • gamepad;
  • USB cable or Bluetooth adapter.

Agree, nothing special. If you want to connect a PS3 game joystick to your computer, you may additionally need:

  • emulator program for setting up control buttons;
  • Gamepad drivers.

In fact, everything is much simpler than it seems, so even a novice user can handle connecting game controllers.

Connecting to PS3 via wire

In general, the task at hand will not differ much from working with a “native” gamepad. Having all the previously listed accessories will reduce the likelihood of failure to a minimum. Some problems may arise when working with wireless gamepads. If wires are used, in 90% of cases you can hope for a successful completion of the operation.

How to connect a joystick from PC to PS3? To do this, just follow these short instructions. It looks something like this:

  1. Place the game console in a convenient place. Connect it to a power source using a special wire, and then to a TV or monitor.
  2. Turn on the device. Wait for it to load completely.
  3. Connect the USB cable to the gamepad. Insert it into any USB hole on the set-top box.
  4. Enable gamepad. Wait for it to initialize.

This is where all the action ends. If the PlayStation 3 supports one or another joystick from a computer, everything will work. Otherwise, you will have to abandon the idea. It is important that the controller is set to Gamepad 1.

Wireless connection to PS3

How to connect a joystick from PC to PS3 wirelessly? It is important to remember that the first work with the device must be carried out through a wire. Otherwise, the controller will not be recognized. Accordingly, it will not work.

If you want to use a wireless connection, you must:

  1. Connect PS3 to the screen and to the network.
  2. Insert the WireLess receiver into the USB connector. It is sold either separately from the gamepad or bundled with it.
  3. Turn on the controller and set-top box.
  4. Press the PS button on the controller.

No more manipulations are required. After these steps, the joystick will be detected by the game console. You can play!

Important: for any connection, first charge the controller, otherwise it simply will not turn on. 10-15 minutes of recharging before starting work is enough.

From console to PC

Now you know how to connect a joystick from a PC to a PS3. How can you perform a similar operation, but in reverse? That is, work with a PlayStation game controller on a computer?

Bringing your idea to life is easier than it might seem at first glance. As in the previous case, we recommend giving preference to a wired connection, which avoids many problems.

The algorithm of actions when connecting a game controller from a console boils down to the following steps:

  1. Turn on the computer and establish an Internet connection.
  2. Download and install the driver for a specific joystick. To do this, you will have to download a special program, for example, Motioninjoy.
  3. Connect the controller to the PC using a wire.
  4. In the mentioned application, open the Profiles item and check the box next to Select one mode.
  5. Enable gamepad. Wait for it to initialize.

Once synchronization is complete, the light on the joystick will light up. This is a sign that everything was done correctly. The joystick is configured using the additional xPadder program.

If you are using a wireless gamepad, you will need:

  1. Install the driver for the gamepad on your PC.
  2. Insert the WireLess receiver into the computer.
  3. Charge the controller and turn it on.
  4. Find the Bluetooth joystick on your computer and click “Connect”.

Fast, simple, convenient. Now we understand how to connect a joystick from a PC to a PS3 and vice versa. Even a novice user can cope with the task!

When releasing the Playstation 3 to the market, Sony, for some reason, decided that the unique ecosystem of the console would be a huge advantage over its competitors - and therefore condemned developers to difficulty porting their games to a unique architecture. This also affected the company’s joysticks - while Xbox joysticks connect to a computer (PC) without problems, it is problematic to “make friends” with the Dualshock from the Playstation 3 era with a PC. However, not everything is so complicated - and in this article we will talk about the most popular ways to connect Playstation 3 joysticks to a computer.

In general, the computer will be able to recognize the connected Dualshock – and you will even be able to play some (mostly emulated) games. The problem is that Sony gamepads work with technology DirectInput control, while the PC standard is X-input. It is for this transition that special programs are needed.

Motionjoy program

First, let's decide what we need:

Connecting Dualshock 3 to PC via MotionJoy

Connect the PS3 gamepad to the PC and open the MotionJoy application. In the upper left corner of the program we see the tab “ DriverManager" and go here. If you connected the controller, under the inscription “ HardwareLocation» the joystick symbol should appear. As a rule, the connected port itself is indicated, as in the screenshot.

Click on the joystick symbol (Port_#0001.Hub_#0003 in the photo above) and a small menu will appear under it, click on LoadDriver and wait a bit. When a green checkmark appears under MotioninJoy, the driver will be downloaded. Despite the fact that the driver itself weighs only a few megabytes, the download can take a long time, since it comes from the utility’s personal server, and the download speed often does not exceed 50-100 kb/s.

Now go to the tab " Profiles"(upper left corner in MotionJoy). A joystick will be displayed in the “Connected game controller” window, and just below you will be offered several emulation options to choose from. Most often you will be interested in “ X-inputDefault", like the Xbox 360. That is, in fact, we emulate the Xbox gamepad. Options with PS1 and PS2 are needed in order to run games from these platforms through the emulator, and the settings below will help you adjust the vibration motors and LED on the gamepad.

If MotionJoy does not see the gamepad

It happens that the DS3 tool (aka Motion Joy) does not see the PS3 joystick. In this case, you need to do two things:

  1. Check if there is a problem with the cable (when connected to a computer, the LED on the joystick should light up).
  2. Connect the controller after going to the Driver Manager tab in MotionJoy.

That’s basically it – there’s nothing complicated about connecting the Dualshock to a PC via MotionJoy. But let’s look at another, alternative, method.

Connecting a Playstation 3 gamepad to a PC using the SCPToolkit program

First, we need to download the utility and install it. Please note that SCP Toolkit will offer many options when installing. So, for example, Dualshock 3 is a gamepad from PS3, and Dualshock 4 is from PS4, so install the desired version. Also worth disableBluetooth if you are going to use the joystick via cable. After installation, be sure to click on “Run Driver Installer” - this will install the drivers for the Xbox 360 gamepad on your computer.

After installing the driver, connect the PS3 controller to the computer, the utility screen will display something like this:

When the computer detects the gamepad, the " Next", click it and proceed to start the emulation.

This screen will show all gamepads connected to the computer.

The advantage of SCPTools over Motion Joy is that it responds adequately to Bluetooth connections and has open source. Also, the developers of this utility were able to quickly create an emulator for Dualshock 4, which significantly increased the popularity of the program.

Connecting DualShock3 to Android using Sixaxis

Let's make a reservation right away - only users with Root access Android users can use this emulator. Therefore, if you do not want to delve into the system of your mobile phone, it is better not to mess with the Dualshock connection procedure.

Second important point - smartphone compatibility. To check it, just download the Sixaxis Compatibility Checker application and see if the smartphone is on the list.

If the device is on the list, then download the Sixaxis Pair Tool program to your PC.


And one more thing - it is important to understand that the Dualshock will only work in those games that have special control settings for the gamepad.

mob_info