What to do when System Restore in Windows doesn't work? One of the reasons why system restore does not work. What to do if system restore does not work.
Often, users of computers running Windows 7 encounter problems with the operating system. Problems with your computer usually appear when it slows down a lot and programs won’t open. Also, the computer may not start at all or may do so every once in a while.
The reasons that cause problems in the performance of the operating system can be very different. For example, if a computer gets hit virus, it can damage system files. Also, difficulties with the PC may appear during installation low-quality software, which can damage the structure of system files. To solve a problem with the performance of a computer on Windows 7, you need to roll back to the previous one. recovery point.
To protect the OS, Windows 7 uses restore points that the system periodically creates. Essentially, restore points are previous state of Windows 7 system files. To help Windows 7 PC users, we have prepared material that will describe the detailed process of restoring the system in various ways.
Restoring performance in a busy seven
If your computer running Windows 7 boots, but the system is not stable, then it's time to roll back to a previous restore point. First of all, we need to get to the window where we can call up the system recovery options. To do this, open the program “” by pressing the key combinations Win + R, through which we enter the following command: systempropertiesprotection
A window should open in front of us “ Properties of the system" on the " tab System protection" You can also get to this window in the standard way through the menu “ Start". The next action is to press the button Recovery….
After clicking, the System Restore window will open. It will ask you to restore the system using a recommended access point or select another one. We'll stop at recommended restore point.
This window requires confirmation for the selected recovery. To confirm, click the Finish button.
This button will bring up a message warning that after the recovery procedure it will be impossible to return to the previous parameters of the seven. By clicking Yes in the message, we will begin restoring the Windows 7 system.
If the process of returning to the previous state occurred without errors, a corresponding message will be displayed.
If you are unable to roll back to previous settings using the recommended point, you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation you will need special privileges. That is, when you log in, you must select an account admin and enter a password for it.
Restoring the computer's functionality when the OS starts
If your PC is running seven at all is not downloading, then you can start the operating system in safe mode. After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of the function keys). This action will cause menu of alternatives loading seven.
In this menu, select the item “ Safe mode" and continue by pressing Enter, after which the system will start in safe mode.
If the system successfully started in safe mode, then start restoring the seven, as shown in the previous example. In this mode to ensure maximum security many functions disabled OS, including the Windows Aero graphical interface. This is what the running program “” with the command “” will look like systempropertiesprotection"on a system running in safe mode.
We return the computer to functionality using an installation disk or bootable USB flash drive
If the previous two examples do not help you, then you will need to restore seven installation disk or flash drive. For computers that do not have an optical drive, you need to use a bootable USB flash drive with the OS. A bootable USB flash drive can be created using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool And Rufus.
Boot from the installation disk or via a USB flash drive. In the installer start window, click Next and proceed to the next window.
After searching, select the OS you want to restore and click Next.
In the window that appears, select the same item “ System Restore».
This action will launch the Seven recovery utility. In the utility, click Next. This action will take you to list of recovery points. Let's choose a suitable point and continue.
A window will appear in front of you, as in the first example. Therefore, we click the Finish button and respond to the message, after which we will start the recovery.
After a successful rollback to the previous state, you will receive a message like this.
Emergency recovery of Windows 7 using antivirus
If your PC is infected viruses that interfere with the proper operation of the computer and the first three examples discussed do not help you, then a good recovery method in this case would be an anti-virus life disk from Dr.Web. With this disc you can clean the system of all types of dangerous software. In addition to cleaning, Dr.Web LiveDisk will be able to cure infected objects, which are necessary to restore Windows 7.
The Dr.Web LiveDisk image can be used both for recording to an optical disc and a flash drive. To use Dr.Web LiveDisk on a USB drive, you will need a special program. You can download the program for recording onto a flash drive and the image itself on the official website by going to www.freedrweb.ru/livedisk.
Let's run the recorded image on disk, setting it to boot first in the BIOS.
In the bootloader start window, select first item Dr.Web LiveDisk and press Enter. These actions will start loading Dr.Web LiveDisk.
After downloading Dr.Web LiveDisk, we will get a full-fledged Linux-based operating system. As written earlier, the main purpose of Dr.Web LiveDisk is to clean and treat virus software. Therefore, this OS has a built-in antivirus Dr.Web CureIt!. This antivirus runs with the OS.
Click on Dr.Web CureIt! button Start scan, which will start scanning, cleaning the system and disinfecting viruses.
After checking, Dr.Web CureIt! will remove or cure infected objects.
Since there will no longer be malicious code in the system, you can safely restore the system in the three ways described above.
If, after checking the system files, you are unable to restore your Windows 7 system, then the only reasonable solution is to make a complete backup of the information and reinstall the system again.
How to make a system image in seven
Another recovery feature in Windows 7 is creating a system image. In this image, you can save all the information on your hard drive, including the operating system. After restoring using this method, you will receive an OS with the same parameters as on the day the image was created.
Run " Control Panel" and go to the tabs " system and safety», «»
In the window that opens to create an image, indicate the location to save it and click Next.
In the window that appears, all that remains is to click the Archive button, which will start the image creation process.
You can restore the created image with Windows 7 and all the information on local disks using the installation disk. The recovery principle is shown in the second example, only when choosing a recovery method you need to select " Restoring a system image" and indicate its location on the saved drive.
Alternative methods to restore the Windows 7 operating system
In addition to standard recovery methods, there are alternative software that perform the same function. The most interesting solution that allows you to perform system recovery is the program Acronis True Image 2016. This is a proprietary software package from Acronis.
First of all, download and launch Acronis True Image 2016 from a shortcut on the Desktop. When launched, the program will ask for a name and password.
Now let's set it up Acronis True Image 2016 so that he can do backup of the entire disk with Windows 7 OS. This setup should be done immediately after installing the OS, so that while using Windows you can restore functionality from several backup copies of the system created over a certain period of time. So, let's start setting up. To do this, select the storage type by clicking on the “” link.
In the window that opens, select the storage “ Acronis Cloud».
Now let's create a schedule for our backups. To do this, press the button “ Options" and let's move on to the storage settings settings. On the first tab, select the schedule you like for creating backups of our system.
As you can see, the entire computer is selected as the backup source. Therefore, in the schedule we set, a backup copy of the system will be created in cloud storage " Acronis Cloud».
For an example of recovery, let's take an archive copy not from the Acronis Cloud cloud storage, but from a hard drive. If you have created a backup copy on your computer, then Acronis True Image 2016 will find her himself.
So we press the button Restore your computer, after which the program will completely restore the system to the state it was in when the backup was created. Also, if you cannot start Windows 7 on your computer, Acronis True Image 2016 There is a boot image for this that can be burned to disk.
You can download this image from your account page. You can obtain a password and login on the official website www.acronis.com. The principle of operation of the bootloader is the same as with the desktop version. Load disc from Acronis True Image 2016 on your computer you can by setting it in the BIOS first when booting.
From the example it turns out that the utility allows Full control over the creation of PC recovery copies and back up your entire system to the cloud.
An example of launching an Acronis True Image 2016 boot disk
To launch the disk Acronis True Image 2016 When starting the system, you must set the boot mode from optical drive first in the BIOS. For example, for the MSI A58M-E33 motherboard, these parameters in BIOS mode look like this.
Another boot method is to use hotkeys to call up the drive boot menu in the BIOS. For example, for the MSI A58M-E33 motherboard, the hotkey is the F11 button. By pressing this button, we will launch a special mode in which, when the system starts, it will open drive boot menu in BIOS.
After booting from the Acronis True Image 2016 disk, we will be taken to this menu.
In this menu you need to select Acronis True Image 2016, after selection the program will start.
The example shows that launching a boot disk Acronis True Image 2016 Using the required BIOS mode is not at all difficult.
Let's sum it up
In this article we have discussed almost all the methods and parameters system recovery. We also looked at ways to restore the seven using alternative software and using an antivirus. Which method to choose to restore Windows 7 depending on the situation is up to you.
To summarize, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.
I would also like to note that the examples discussed in the material will work not only on Windows 7, but also on more modern operating systems, such as Windows 8 And 10 . And we, in turn, hope that our material will allow you to properly restore Windows 7 and you can confidently say that I can perform a system restore.
Video on the topic
When problems arise with the operating system, sometimes situations occur in which system recovery does not work. Many of us have found ourselves in situations where, for some reason, we needed to restore the operating system.
This is the easiest way to fix any problems in the computer's operating system or problems associated with the operation of certain programs.
You start the operating system recovery process and see that System Restore does not work in Windows. The operating system recovery process starts, goes through all recovery stages, and at the end of the process you see, instead of a window with information that the system was successfully restored, a window with information that the system could not be recovered.
Why System Restore Doesn't Work
If system restore is not disabled, then the reason why system restore does not work may be the antivirus installed on the computer.
To solve this problem, you need to disable your antivirus self-defense. This incident also happened to me. I also needed to do an operating system restore, but the operating system restore did not happen. In my case, the cause was Kaspersky Anti-Virus 2012. There were no such problems with earlier versions of this anti-virus.
Restoring the operating system only works if performed in “safe mode”. If you restore the operating system in normal mode, if you simply pause the antivirus protection, it will not work; at the very end of the operating system restoration process, you will see a message that the operating system was unable to restore the system to an earlier state.
To solve this problem in Kaspersky Anti-Virus, you need to go to “Settings” => “Advanced settings” => “Self-Defense”. In the “Self-Defense Options” tab, you need to uncheck the box next to “Enable Self-Defense”, and then click on the “OK” button.
After these steps, you can begin restoring the operating system.
After the operating system recovery is complete, the antivirus is turned on automatically.
Keep in mind that this is only one of the possible reasons.
Conclusions of the article
System Restore may not work due to the self-defense of the antivirus installed on the computer.
Operating systems of the Windows family are not always highly reliable, so the developers provided the ability to restore the operating system from a special interface. The system restore function is not a reinstallation; user files are practically not affected; only certain settings and system files that caused the error are reset.
However, what if this function does not work? Is it possible in this case to restore the operating system or not?
Reasons why System Restore doesn't work
There are several reasons that prevent you from using this OS function:
- Absence "Restore Points". The operating system is created specially "Restore Points", with the help of which the process of “reanimation” is carried out. However, in the OS settings, the function of creating such “points” can be disabled, and if they are not there, then there is nothing to restore from. Fortunately, their absence is not a “sentence”;
- Broken "Restore Point". If "Restore Point" was successfully created, but the system cannot use it and displays an error, this means that the information stored in it was damaged. In this case, you will have to use other “points”, if any;
- Activities of specialized software. Antivirus programs, special blockers and even some optimizers running in the background can prevent the recovery procedure from starting;
- There are viruses on the computer. Again, some viruses may prevent the recovery procedure from starting. This can happen by changing the registry, system files, or simply deleting "Restore Points";
- Serious operating system error. If some fatal error occurred while using the OS, during which the main system files were damaged or destroyed, then Recovery will not be able to start. In this case, all that remains is to reinstall the operating system;
- Hardware problems. Most often, users are unable to start the recovery procedure due to a broken hard drive and/or RAM sticks. In this case, they will have to be repaired or replaced, and then try to “revive” the operating system again.
Let's look at how to deal with several of the problems described.
Option 1: Select another “Restore Point”
If you have it enabled, it is possible to create "Restore Points", then most likely you will be able to use several pieces. So, let's look at how to perform a system restore under this condition:
Option 2: Disable antivirus software
Antivirus programs running in the background can sometimes prevent the system restore procedure from starting (this does not apply to Windows Defender). To avoid all problems, it is simply recommended to turn them off while the restoration is being carried out. This may require an additional restart of the computer.
So, let's look at how to disable the most common antiviruses. Let's start with Kaspersky (the instructions are universal for all versions):
Now let's move on to Dr. Web:
We’ll also look at how to disable protection for Avast antivirus:
The recovery process is done in the same way as in the first option. When finished, turn on virus protection again.
Option 3: Recover from Safe Mode
Sometimes the built-in functions of the system can be interfered with by unwanted software. In this case, you will have to do all the important manipulations from "Safe Mode". It disables all minor and extraneous services, drivers, etc., which allows for minimal third-party software interference in the operation of Windows.
Let's look at how to log in for most Windows operating systems:
Additionally, if in the menu after pressing a key F8 there was an option "Load last known known configuration", then use it initially. This is something like an accelerated analogue "System Restore". If the computer can boot with the last known good configuration, then most likely you will not need to perform the recovery procedure.
Users of newer versions of Windows may encounter the problem that the F8 key does not work and the menu does not appear. In this case, you will have to do the following:
IN "Safe Mode" It is also recommended to disable any antivirus programs that may interfere with operation. More details on how to do this are written in the 2nd version. The process of restoring the operating system is no different from that described in the first option.
Option 4: Image recovery
If it turns out that there are no “recovery points” on your computer at all, then you can use an operating system image recorded on a flash drive. Accordingly, you will need an image of exactly the same OS that is currently installed on the computer.
So, when everything is ready, proceed to the recovery process:
This article discussed the main reasons why System Restore in Windows may not work. Using the above options, you can get the OS back up and running.
System Restore is a great tool that allows you to return Windows and operating system settings to a previous state. The tool can help out with problems with drivers or programs that have destabilized the system. However, some changes may affect the system so much that you will no longer be able to log into Windows.
What can be done in this case? How can I run System Restore to get Windows back to working order? You will find the solution to this problem right here.
How to Run System Restore Using Advanced Boot Options in Windows 8 and Windows 8.1
So, boot your computer from the system recovery disk (or flash drive). After the loading screen, you will see several options. Select Diagnostics.
Then click "Advanced Options".
You now have access to several recovery tools. Select System Restore to get started.
The operating system will need time to prepare the system recovery. When this process is completed, the recovery mechanism will ask you to select an account. If you have multiple accounts, select the one that acts as the computer administrator.
After all these steps, a system recovery window will appear on the screen. Use it to return Windows 8 or Windows 8.1 to a working state.
How to Run System Restore Using Advanced Boot Options in Windows 7
In Windows 7 everything is a little simpler. After turning on the computer, immediately after loading the BIOS, press F8 on the keyboard. On the Advanced Boot Options screen, select Troubleshoot your PC.
When the recovery options screen loads, you will be asked to select a keyboard input method. Select the required method and click Next.
You will then be asked to select an account and enter a password. Do this and click "OK". If the account does not have a password, then you do not need to enter anything.
The System Recovery Options window will appear on the screen. Select System Restore.
As a result, the tool we need will be launched.
Use it to restore Windows 7 to its previous state.
Have a great day!
If you have problems with Windows on your computer, then you can use the “System Restore” function, which rolls back system files, program files and returns the system registry to its previous state.
System Restore will help solve computer problems by replacing damaged or infected files with older, but working versions.
However, in some cases, system restore may not work, then you will see an error message on the screen, or the restore simply will not fix anything.
In such cases, there are a few simple things that a system restore can fix. One of these things is to run System Restore in “safe mode” to prevent other applications from interfering with the recovery process.
But let's take things in order.
Try a different restore point
First, try using a different restore point. It's worth trying this if you see an error message when you try to run the System Restore process or if you successfully did a System Restore but it didn't solve the problem.
In the System Restore window (click the “Start” button, enter “System Restore” in the search bar and left-click on the item that appears) select the “Select a different restore point” option and click “Next”.
Try to select a system restore point that was created before the problems with your computer began. All later recovery versions created after problems with the computer appeared will not be able to help you. To view all available recovery points, check the checkbox next to “Show more recovery points”.
Ideally, this should solve your problems. However, if you see an error message or performing a system restore after completing the operation did not solve your problems, move on to the next step.
Using Safe Mode
System Restore replaces the system files on your computer with the system files from the restore point. However, some applications, including those running in the background, may interfere with the recovery process. This occurs because antivirus programs try to protect files, so they may prevent System Restore from replacing damaged files. Other types of software applications (even possibly viruses or other malware) can also interfere with the system recovery process.
To bypass these background services, you can start in Safe Mode and run System Restore from there. In Safe Mode, Windows doesn't run applications or third-party drivers, so they can't interfere with System Restore.
To boot Windows into Safe Mode, restart your computer and press and hold the F8 key while booting. In the boot menu that appears, select “Safe Mode” and press “Enter” (If after rebooting you do not see the boot menu, then restart your computer again and repeat all the steps).
Run System Restore in Safe Mode. Once the recovery process is complete, restart your computer again and Windows will boot into normal mode.
Reinstalling Windows
If System Restore does not work even in Safe Mode (be sure to check other restore points), then the recovery files may have been damaged. Either the system restore was successful, but did not solve your problem, or you do not have older restore points created before the problem occurred.
In short, System Restore did not solve your problem. Then you need to fix the problem by restoring your computer's operating system from a recovery partition or by completely reinstalling Windows. Don't worry, it's not as scary as it might seem at first glance.
To begin with, do not forget to make a backup copy of your personal data, because when reinstalling, as a rule, all files and programs on your hard drive are erased. Once you are sure that all important files are safely stored in another location, you can proceed with the reinstallation.
There are three options for the development of events:
- Most laptops and other computers are sold with a recovery partition on the hard drive, which can be activated by pressing a special button when the computer boots. To find out what this button is, look in your computer's user manual.
- If your computer came with a dedicated recovery disc rather than a recovery partition, insert the disc into the drive and restart your computer to begin the recovery process.
- If you installed Windows yourself (perhaps you built your own computer or installed another version of Windows on it), insert the Windows installation disc into your computer and restart it.
To complete the repair or reinstallation process, carefully follow the instructions that appear on the screen.
Need to download music from VK?
