There is no command for flashing zte blade gf3. Flashing ZTE Blade: instructions, firmware, download links

The advantages of the ZTE Blade GF3 phone are obvious: it is very cheap and at the same time has good technical characteristics. Therefore, it is not surprising that this gadget is very popular on the market among connoisseurs of budget mobile devices. A ZTE phone will be especially cheap if you order it directly from China. But there is an important nuance: a smartphone usually comes from China with local firmware, which contains English and Chinese and does not contain a single Russian word.

The question arises: how to deal with this? The solution is obvious: the phone needs to be reflashed, then its use will be much more comfortable. Moreover, you can even install new firmware yourself, without contacting an expensive service center. We will talk about how to update the software on your smartphone in this article.

Preparations

First you need to download the firmware file itself to your PC. You can do this or look for a newer version on the official website. The download is completely free, and therefore updating your smartphone will not cost a penny. After downloading, you need to unpack the archive.

Also, before you start installing the software, take care to create a backup of all data and save it on another medium. When you change the software, all settings will be automatically cleared and files will be deleted, so it’s a good idea to make sure they are safe.

Before the start, you also need to charge your ZTE smartphone at least 30–50% (or better yet completely) and check whether the computer has drivers to recognize the mobile gadget.

When all the preparations are left behind, we begin the installation.

FlashTool

The most popular way to install new software is to use the program. How to flash a gadget using it? It is enough to connect the smartphone to the computer via USB, perform USB debugging in the settings of the mobile device, then run the program and specify in it the path to the archive with the firmware. Next click on Download, starting the installation - and the process is started. You need to wait a few minutes for the software change to complete successfully, and then all that remains is to configure your smartphone again.

Recovery

You can also reflash your phone through Recovery. In this case, download the file with the new firmware from your computer to an SD memory card. You need to insert the card into the gadget, start it in recovery mode using the volume down and power buttons, then completely clear the data and settings and install new software, indicating the path to it on the memory card.

In both cases, the first launch of the smartphone will occur within a few minutes. Don't be alarmed if the process takes longer than usual: this is normal if the system has been updated.

If after turning on the phone it works well and you are satisfied with everything - congratulations, you have replaced the original firmware with a more convenient custom one, spending only a few minutes on it and saving yourself from unnecessary financial costs!

How to update the software?

We provide you with different ways to update the software, namely: update using a memory card or update over the air.

To update over the air, you need to connect to a Wi-Fi wireless network or GSM Internet connection and check for updates in the settings.

What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?

A smartphone is a complex electronic device that includes the functions of a pocket computer and a cell phone and consumes a large amount of energy to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transmitting and receiving path. The display brightness is automatically set to maximum in a very bright environment (sunny day) or set manually by the user. Maximum brightness consumes maximum energy. When GSM is operating and with stable and stable reception “at maximum”, the device consumes a minimum amount of energy to maintain communication. If the network signal is unstable and weak, the device requires more power to maintain communication. In the case of “Network Search” in an area where there is no network, the device consumes the maximum amount of energy, which is spent on searching for nearby base stations. To reduce your phone's energy consumption you need to:

1. Disable GPS if not required.

2. Disable mobile Internet if not needed.

3. Disable or delete unnecessary unused applications, because they are in an active state and consume the internal resources of the device.

What should you do if your phone freezes, won’t turn on, or reboots?

The cause of rebooting or freezing in most cases is third-party software or programs.

1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option from the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data/factory reset". The method for entering “Recovery mode” is described below in the paragraph “How to enter Recovery mode?”.

2. If resetting to factory settings does not help, update the software. Methods for updating the software are described in the paragraph "How to update the software?".

3. If the software update does not help, contact your nearest ZTE Authorized Service Center.

How to make a backup of data, a notebook or a “Back-up”?

There are 3 ways to do a “Back Up”:

1. In the phone settings, in the "Backup and reset" submenu, check the box for recovery.

2. You can transfer the necessary information to your computer using a USB cable.

3. You can make a “Back Up” using a third-party program.

What should I do if I don’t remember the password or pattern to unlock the screen?

If you have forgotten the pattern or digital password to unlock the screen, you need to perform a reset to factory settings: 1. Turn on the device in “Recovery mode” and select “wipe data/factory reset”. 2. If the procedure is not completed, you must contact the ZTE Authorized Service Center.

How to use wireless networks (Wi-Fi, BT)?

1. In the device settings, turn on Wi-Fi. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.

2. The device will automatically begin searching for active Wi-Fi networks in the access zone from 5 to 50 meters from the access point (depending on the power of the access point).

3. Select the network you need and click on it. If your wireless network is password protected, enter it.

4. Once connected to the desired network, the Wi-Fi icon will appear on the main screen of the device.

How to enable Internet distribution on your phone (USB modem or WiFi router)?

There are two ways to enable Internet sharing on your phone. The first way is to enable distribution as a USB modem, the other is to enable distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:

1. USB modem - this method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings->Wireless networks->More" Modem mode - check the USB modem box." Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB modem or simply disconnect the cable connection.

2. WiFi router - make sure you have a stable Internet connection via a mobile network or USB. "Settings->Wireless networks->More" Modem mode - check the "WiFI access point" box. To secure your wireless connection, tap the hotspot icon and then tap WiFi Hotspot. In this menu you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"

How can I quickly see the charging status?

During charging, press the power button. The battery charge status will be shown on the main screen of the phone.

Why is the amount of free memory on the device less than stated by the manufacturer?

Unlike the processor, which has its own built-in memory, other devices, such as a video processor, audio processor and other devices included in the elemental base of the device’s central board, consume user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of overflow, user memory is used.

What types of device locking can be used?

There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.

1. Locking with a graphic key

2.PIN code lock 3.Password lock

What is the operating temperature of ZTE phones?

The operating temperature ranges from (-10C) to (+50C).

What does ROOT mean?

ROOT is "administrator rights". ROOT makes it possible to change system files, change the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling of ROOT rights can harm your operating system.

How to enter Recovery mode?

In the off state, simultaneously hold down the volume button (increase +) and the power button.

What should I do if the battery is not charging 100%?

The device's battery is designed in such a way that it dissipates part of the received charge and can subsequently be recharged. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.

How can I add a Google account to the device?

1. When you turn on your smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new one or use an existing account: Settings->Accounts and “add account”.

How to enable USB debugging? How to get access to the "For Developers" menu?

Enter "Settings->About phone->Tap on "Build number" several times. Then you will have access to the "For Developers" submenu. In this submenu, "USB debugging" and other functions for developers are available

How to connect your phone to PC?

To install the driver (automatically), do the following:
1. Connect your phone to your computer.
2. When connecting, select "Virtual Disk" or "Virtual CD" depending on the model.
3. The computer should detect an additional disk, run “Autorun.exe” on it and install the driver
4. If the drivers are not installed, go to "Settings->For Developers" and enable the "Disk driver". (click on "Build version" 10 times
5. When you turn on (USB Debugging), the driver will also be automatically installed.

What do the letters E, G, H mean?

When the phone's data transmission is active, the following symbols appear on the status panel (indicating signal reception, battery capacity, etc.):
- E means EDGE protocol is active
- G means active operation of the GPRS protocol
- H means active operation of the HSDPA protocol, which is part of WCDMA

How to flash ZTE?

The telephone plays an almost integral role in our lives. Few people can imagine themselves without a potential source of communication. Thanks to the phone, even being at a distance, we somehow became closer to each other. And as soon as something happens to our phone, we immediately feel like we have no hands. In this article we will talk about how to flash a ZTE phone.

Device firmware

You can flash ZTE in several ways, let's look at the example of the CWM application (you can download it on the website androidp1.ru) for ZTE Blade.

1. To get a high-quality result of the work done, it is advisable to use a Gen 2 phone device. If you have a Gen 1 device, you need to download the Swedish Spring RLS4b or CyanogenMod firmware, then with the phone turned off, press the “-” and “on” keys, wait for the FTM inscriptions and connect the phone to the computer. Run download_nochecksGen2.exe. and wait for the complete installation. After which your phone will receive the Gen 2 version.
2. Then download the necessary new firmware from the Internet, connect the phone cable to the PC and enter Recovery using the “-” and “on” keys.
3. If the downloaded firmware does not contain a2sd, then the actions must be started from the point described below, otherwise you need to format the flash by selecting the following actions “advanced” - “partition sd - ext=512, swap=0, fat”. If the flash card is a budget option, then some problems may arise, then try formatting it again or replacing it.
4. Then we proceed to the action “wipe data/factory reset”, “wipe cache partition” or do “wipe battery”.
5. Next, copy it to the flash firmware, but without opening it. So that the PC can see the smartphone in the CWM program in the main menu “mounts and storage”, click on “mount USB storage” and copy everything you need, then click on “unmount”.
6. Then go to Recovery “install zip from sdcard” and install the firmware directly.
7. After installation, click on “reboot system now” and the phone can be rebooted.
8. After rebooting, your phone will have new firmware. This method is only suitable for ZTE Blade, and as for new updates, they can always be obtained through the phone settings.
9. If you have completed all the steps, and the new firmware is not installed on your phone or installed incorrectly, then you need to repeat the entire procedure again.

ZTE breakdowns

ZTE phone breakdowns occur in the following cases

1. Mechanical problems that can only be eliminated by replacing components or repairing them. This repair is almost impossible to perform at home and requires the intervention of only a service center.
2. Firmware replacement.

Why flash your phone?

The phone should be flashed for the following four reasons

1. The phone stopped turning on.
2. Constantly reboots on its own.
3. The phone needs to be restored from unsuccessful firmware.
4. There is a desire to install a newer firmware version.

More specific information about the phone brand you are interested in can be found in the section.

Perhaps no ZTE model has as many official and custom firmware as the ZTE Blade. It is difficult to say which of them is the best firmware for ZTE Blade, it depends on personal preferences.

Before considering any ZTE Blade firmware options, it is necessary to mention that this smartphone comes in two versions: Gen1 and Gen2. You can determine Gen using the Ask Mr Pigfish application, developed specifically for ZTE Blade. You can download it for free in the Google Market. Gen2 has some advantages over Gen1, for example, better signal strength, HSUPA support, 850mhz band for GSM and 3G, as well as the ability to install new versions of Cyanogenmod in the future.

Instructions for moving from Gen1 to Gen2

It is assumed that ClockworkMod Recovery and drivers are already installed.

• Download the firmware or and put it on the phone’s SD card.
• Download and transfer the stock one to the memory card.
• With the smartphone turned off, hold down the volume “-” and “on” and go to ClockworkMod Recovery, then install the downloaded recovery via CWM as an update. After installation Reboot
• Download the archive with partition redistribution (cache; system; data). In this case, 136 MB are allocated for the system, and more than 2 megabytes are allocated for the cache.
• Unpack the archive on PC
• Turn off the smartphone, then hold down the volume “-” and “on”, when the FTM message appears, connect the phone to the PC.
• In the unpacked partition redistribution archive, run download_nochecksGen2.exe, click Start and do not touch anything until the installation completion notification appears. After completion, click OK.
• Go to “advanced” and select “Reboot Recovery”.
• CWM will restart, after which we install SS RLS4b or CyanogenMod from CWM (when installing SS RLS4b it will write your device generation Gen2).
• We make a Backup of the Channel1.nvm file, which will appear after switching to Gen2, in the folder from which download_nochecksGen2.exe was launched. This is necessary to save IMEI data in case of switching back to Gen1.

If after the transition there are problems when starting CWM, but the firmware has been installed, then download and install OneClickRecovery_ver2.apk and launch it. You can download the file.

Universal instructions for flashing ZTE Blade using CWM

It is assumed that CWM and firewood are already installed on the phone. It is advisable to install CWM version 3.0.1.4, which is suitable for firmware 2.2 and 2.3.

• Download the required firmware.
• Connect the USB cable.
• Go to Recovery.
• If there is no a2sd in the firmware, then continue from the next point, otherwise we format/partition the flash drive by selecting “advanced” in the menu - “partition sd - ext=512, swap=0, fat = the rest will be automatic”. A cheap flash drive can cause problems. In this case, you need to format the SD card on your computer in fat32, and then install the firmware, then split the flash drive and perform a full wipe. If suddenly the firmware becomes crooked, you need to flash it again.
• Doing “wipe data/factory reset”, “wipe cache partition” is not necessary, but you can also do “wipe battery”
• We copy the firmware to the flash drive without unpacking it (so that the PC can see the smartphone in CWM, in the “mounts-and storage” menu, select “mount USB storage”; when we have copied everything we need, click “unmount”).
• In Recovery, select “install zip from sdcard” and install the firmware.
• Finally, select “reboot system now”, after which the phone reboots.

This method is also suitable for installing updates on ZTE Blade.

As for updates, you can easily update your device’s OS to version 2.2 through the settings. You can download the firmware update for ZTE Blade to version FRY_RU_P729VV1.0.0B01 (OS Version: Android 2.2). The archive contains instructions for installing the update in Russian.

A significant number of official firmware for ZTE Blade are presented here. A large number of firmware can be found here. In addition to the fact that you can download firmware for ZTE Blade there, for clarity, a table with firmware versions of OS 2.1 and 2.2 is also presented, from which you can find out a lot of information about the required firmware When downloading, do not forget to check the compatibility (TFT or OLED).

You can watch the installation of firmware 2.3 7 on ZTE Blade in this video.

You can watch an overview of the ZTE Blade 4.0.4 firmware, as well as get some information about the installation from this video.

To install the ZTE Blade android 4.0 firmware, partition redistribution is required, but the author claims that he did not do this, and everything installed fine. In this case, ICS ColdFusionX CM9 Release 9 was installed. Those. This firmware was installed like any other custom firmware.

Missing functionality on your purchased ZTE Blade GF3 Android smartphone? Do you want to root this smartphone? The site and article getting Root ZTE Blade GF3 will help you!

What is Root?

For those who have just become a beginner or are not an expert in the vast world of Android and are not particularly familiar with the concept of how - Root Android, as well as why it is needed, what can be done after obtaining Root rights, or how to subsequently get rid of them if they are no longer needed, all this can be found in the detailed article -!

First of all!

There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Required components and conditions, the second part is Instructions How to get root rights using the received files and programs. If, in the process of obtaining root rights, Android constantly reboots or is in the process of eternal loading (happens extremely rarely, but still), then it’s worth it. Now let's start getting Root rights!

Android manufacturers sometimes release new firmware on which you cannot get Root using one of the suggested methods. If the article contains alternative methods, try them. Doesn't work anyway? Indicate the Android version and firmware version in the comments (don't write angry shitty comments, it won't do you any good or anyone else). Android is frozen (will not load), read and re-read from the very FIRST PARAGRAPH, all the necessary links are present in the article!

Still have questions?

Do you have any questions or can’t get root rights to your Android? Leave comments about what worked or didn’t work for you, or what you did differently.

Necessary tools and conditions

Instructions for Rooting ZTE Blade GF3

1. Application Kingroot download to your device and install. If a similar window appears, allow and continue; 2. Launch the newly installed application Kingroot;

3. Press the blue Root button (Start root / Try to root);

4. And wait a couple of minutes while the operation of obtaining root access is performed;