Official firmware for Samsung A5. Getting Root Samsung Galaxy SM-A510F A5 (2016)

Instructions for installing the official single-file firmware on the Samsung Galaxy A5 2016 (SM-A510x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy A5 (2016) and return the phone status (Settings > About device > Properties > Device status) to “Official” after upgrading from custom firmware and thereby returning the ability to receive updates By air, just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and factory reset", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Samsung Galaxy A5 2016 smartphones (i.e. model SM A510F) are starting to receive updated firmware. Build number A510FXXU3BQB1, Android version - 6.0.1 Marshmallow. This post is about how to install the current update on Galaxy A5 2016 SM-A510F.

As you know, after installing the official software, root, if there was one, is automatically canceled. This is just a reminder.

We also remind you that at the moment there are only two ways to install the official update A510FXXU3BQB1 Android 6.0.1 Marshmallow. These are the so-called OTA and KIES.

However, if you cannot install the firmware via OTA or KIES for some reason, there is also a third method - manual installation using Odin.

But we still strongly recommend starting with official methods. And only if neither OTA nor KIES gives the desired result, then you can try the manual installation method. Again, only if you have the proper experience (by the way, for questions related to the repair and restoration of the A510F and other Galaxy, here - http://teh-profi.net/remont_telefonov/samsung/a510f.htm).

Basic information about the A510FXXU3BQB1 Android 6.0.1 firmware is as follows:

device: Samsung Galaxy A5 2016
model number: SM-A510F
OS version: Android 6.0.1 Marshmallow
assembly: A510FXXU3BQB1 .

Attention! This update is only for Samsung Galaxy A5 2016 SM-A510F smartphones. Therefore, firstly, there is no need to try to install it on other Android devices. Secondly, the following describes the process of installing the software using a Windows PC. Thirdly, the procedure is aimed at the most ordinary user, and if you follow the instructions, you can do it on your own, but if you have never updated the firmware of your Galaxy A5 yourself before, then this time it would be a good idea to contact a qualified specialist.

Now to the point.

preparatory stage

So, before you start installing the update:

We make sure to create a backup copy of all important files stored in the memory of your SM-A510F, as well as copies of all smartphone settings. After installing the official update, all this data should be restored automatically, but if any error occurs during the process and the procedure is interrupted or the update is installed incorrectly, then without a data backup you risk losing it. All for a long time, if not forever.

check the battery charge level (the battery should be charged at least 60%, but it is better to spend a little time and charge it completely);

We transfer backup copies of data from the smartphone’s memory to a memory card (preferably a separate one) and/or any other external data storage device;

We check that USB debugging mode is enabled in the smartphone settings, otherwise you simply will not be able to transfer data from the computer to the smartphone via USB;

If necessary, install the USB driver for the Galaxy A5 2016 SM-A510F on your computer.

Let us remind you once again: if on your Galaxy A5 2016 SM-A510F you use the so-called custom ROM, be it CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM or any other, then after installing this update your custom firmware will be deleted. And any Custom Recovery, like ClockWorkMod Recovery (CWM), TWRP or Philz Recovery will automatically be replaced with the official Stock Recovery.

How to install/update new firmware on Galaxy A5 2016 SM-A510F via OTA (Over the Air):

click " Settings » -> « About the device » -> « Software Update "(if after this you see a message on the screen that " The latest updates are already installed“, then the update for your smartphone is not yet available, so we cancel the OTA method and go to KIES);

tap " Update " And " Install “, and we wait;

Upon successful completion of the file download procedure and installation of new firmware, the smartphone will reboot automatically.

How to install/update new firmware on Galaxy A5 2016 SM-A510F via Samsung KIES (computer required):

connect to the Internet - better (faster and cheaper) through a reliable WiFi network;

download and install the Samsung KIES utility on your computer;

connect the smartphone to the computer via a USB cable;

launch Samsung KIES, the program should detect the smartphone itself and then immediately display information about the current firmware version and the new version, if available (if it is not available or is not displayed, then the update for your smartphone is either not yet available, or KIES is also not working, and the firmware must be installed manually via odin);

click the button " Update "and follow the instructions of the program;

Upon successful completion of the installation procedure for the new firmware, the smartphone will reboot automatically.

You need to disconnect your smartphone from your computer only after it has been successfully rebooted.

How to install/update new firmware on Galaxy A5 2016 SM-A510F manually using Odin (computer required):

download and unpack the update archive on your computer into a separate folder (in a visible place):

A510FXXU3BQB1
Region: SER (Russia)

AP: A510FXXU3BQB1
BL: A510FXXU3BQB1
CP: A510FXXU3BQB1
CSC:A510FOXY3BQB1
Build date: 02/03/2017
Changelist: 8208732
Download: link

A510FXXU3BQA3 New
Region: SEK (Ukraine) – Kyiv Star
OS: Marshmallow (Android 6.0.1)
AP: A510FXXU3BQA3
CP: A510FXXU3BQA3
CSC:A510FOXY3BPL8
Build date: 01/03/2017
Changelist: 8208732
Download: link

download and install on your computer Odin utility v3.09 (we need the file Odin v3.09.exe);

launch Odin v3.09.exe with administrator rights (right-click on the Odin v3.09.exe icon -> “Run as administrator);

reboot your Galaxy A5 2016 A510F in Firmware Mode (Download Mode): press the buttons simultaneously until a black screen with a warning appears, then press the volume up button and switch the smartphone to Download Mode ;

Now we connect the device to the computer via a USB cable;

after connecting the smartphone to the computer on the Odin screen in the ID:COM section will appear inscription with COM port number (for example, 0:), as well as a line with the COM port number and the word "Added!" - in the Message window. This means that the smartphone is normally detected and ready for use (otherwise, you will have to reconnect it via another USB, and in an even worse case, reinstall the USB drivers and try again);

Next, you need to check that only the options “ Auto Reboot " And " F. Reset Time «;

press the AP button and specify the path to the file with the extension .tar.md5 in the folder where we unpacked the update ZIP archive;

After that, press the button “ Start "and wait for the installation procedure to complete;

it ends with the appearance of the inscription “ PASS! "in the ID:COM port line, the entire line turns green and the smartphone begins to automatically reboot;

After rebooting it can be disconnected from the computer.

Actually, congratulations. You personally updated the firmware of your Galaxy A5 2016 SM-A510F to the official A510FXXU3BQB1 Android 6.0.1 Marshmallow (this is the number that will be displayed in the “About the device” section of the smartphone settings).

How to fix Bootloop on Galaxy A5 2016 SM-A510F

If something went wrong and the update installation procedure was clearly delayed (longer than 10 minutes), then do the following:

press the buttons again Volume Down+Home+Power and turn it on Recovery Mode ;
but first, in the menu that appears, click Wipe Data/Factory Reset And Wipe Cache Partition (we move through the menu with the volume up button, select an option with the power off button);
We start the update installation again.

Keep in mind, the command " Wipe...» resets the entire built-in memory of the smartphone, so the files will remain only on the SD card.

Instructions for flashing the Samsung SM-A510F Galaxy A5 (2016) smartphone to the new official or custom firmware. Obtaining Root superuser rights on Samsung Galaxy A5 (2016) SM-A510F, installing custom recovery (TWRP).

How to flash Samsung Galaxy A5 (2016) SM-A510F? In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download Official Firmware for Samsung Galaxy A5 (2016) SM-A510F – A510FXXU1APAE ( RU), A510FXXU1APAE ( U.A.)

After you have downloaded everything, unpack the archive with the driver for Samsung Galaxy A5 (2016) SM-A510F and install it. Then unpack the archive with Odin and the firmware.
Run the Galaxy A5 Odin firmware program as administrator. To do this, hover over Odin and right-click and select "Run as administrator", then click "Yes".

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the field "BL"
The AP……….tar.md5 file is inserted into the field "AP"
The file CP……….tar.md5 is inserted into the field "CP"
The CSC file……..tar.md5 is inserted into the field "CSC"

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy A5 (2016) SM-A510F into flashing mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program. That's all!

Obtaining root rights (root) on Samsung Galaxy A5 (2016) SM-A510F

Go to the phone settings and enable developer mode (settings > about device >
Then go to settings >
Download the cf_autoroot_sm-a510f_ported.zip archive and then unzip it to the root of the C drive on your computer.
Run the Odin flasher program as administrator (if you don’t have it download above) and flash the archive cf_autoroot_sm-a510f_ported.tar.md5 (AP button in Odin)
The phone will restart itself, after which the supersu and Root program will already be installed on your Samsung Galaxy A5 (2016) SM-A510F smartphone.

Installing custom recovery TWRP v3.0 on Samsung Galaxy A5 (2016) SM-A510F

Go to the phone settings and enable developer mode (settings > about device > software information and click on the “build number” line 7 times).
Then go to Settings > Developer Options and activate two options – “usb debugging” and “unlock pre-installed... OEM” - if you don’t do this item, the phone may not start - you will have to restore the stock firmware!!!

For those who have just become a beginner or are not an expert in the vast world of Android and are not particularly familiar with the concept of how - Root Android, as well as why it is needed, what can be done after obtaining Root rights, or how to subsequently get rid of them if they are no longer needed, all this can be found in the detailed article -!

First of all!

There are no "left" links or unnecessary actions in this article! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on obtaining Root rights is divided into two parts: The first part is Required components and conditions, the second part is Instructions How to get root rights using the received files and programs. If, in the process of obtaining root rights, Android constantly reboots or is in the process of eternal loading (happens extremely rarely, but still), then it’s worth it. Now let's start getting Root rights!

Android manufacturers sometimes release new firmware on which you cannot get Root using one of the suggested methods. If the article contains alternative methods, try them. Doesn't work anyway? Indicate the Android version and firmware version in the comments (don't write angry, shitty comments, it won't do you any good, or anyone else). Android is frozen (will not load), read and re-read from the very FIRST PARAGRAPH, all the necessary links are present in the article!

Still have questions?

Do you have any questions or can’t get root rights to your Android? Leave comments about what worked or didn’t work for you, or what you did differently.

Many novice smartphone users, when they hear the word “firmware” for the first time, do not understand what we are talking about, why it is needed in general.

This is why you can so often see questions asked on forums: “What is firmware and how to flash a Samsung Galaxy A5?”

In this article you will find out why this is necessary, and also receive detailed instructions for flashing the Samsung Galaxy A5 firmware.

The term "firmware": meaning

A smartphone, like any modern computer, runs an operating system (Android, Linux, Windows or another).

She is completely responsible for the operation of the device, in other words, being its “brain”. “consciousness”, which is controlled by the computer.

Without an operating system, smartphones, tablets, and computers remain simply sets of dead hardware. Everything is simple with a computer, we install an operating system on it.

In smartphones, the operating system is located in the internal memory, and it is the installation procedure that is called “firmware”.

That is, the system is recorded on the internal, permanent memory of the phone. If you compare the procedure with a computer, this roughly means that you are reinstalling Windows on it.

Now let's move on to the main question - how to reflash the Samsung A5.
Instructions

To install new firmware on the Samsung Galaxy A5 2016, download the following files to your computer: the Odin flashing program, the official firmware for the Samsung Galaxy A510FXXU1APAE (UA) and the SAMSUNG USB Driver.
Unpack the archive with the driver and install it.
Then do the same with the flashing program and the official firmware.
Run the firmware program, doing it as an administrator. To do this, hover over Odin and right-click “run as administrator.” Then confirm “yes”.
The firmware files must be placed in this order: File BL...tar.md5 is inserted into the “BL” field, file AP...tar.md5 – into the “AP” field, file CP...tar.md5 file – into the “CP” field, file CSC …tar.md5 – in the “CSC” field.
Make sure the checkboxes are located in “F. Reset Time" and in "Auto Reboot".
Put the device into firmware mode. To do this, you need to turn on the smartphone, press and then hold the following buttons: “power”, “home”, “volume down”.
After this, a menu will open. Press "volume up".
You connect your smartphone to your computer using the included USB cable, and “COM” appears in the Odin program.
Click "Start".
The smartphone firmware process has started.

Peculiarities

If for some reason your computer cannot recognize your phone, try reinstalling the driver or try a different USB port.

After flashing the firmware, the smartphone reboots automatically. The corresponding “Finish” message appears in the Odin program.

To get root (root rights), you will need to go to the settings of the Galaxy A5 (2016) and enable developer mode: settings / about the device / software information.

Click the “build number” line seven times. We activate “OEM unlocking” and “usb debugging” in the settings (it is important not to skip this point, otherwise the stock firmware will have to be restored again). Download the “cf_autoroot_sm-a510f_ported.zip” archive and place it in the root of drive C on your PC.

Run the flashing program and flash the archive “cf_autoroot_sm-a510f_ported.tar.md5” archive. The smartphone will restart automatically.

If you have any difficulties or were unable to flash the Samsung Galaxy A5 yourself, contact the service center. Good luck to all!