Nokia lumia 530 firmware for android. How to flash a Windows smartphone: step-by-step instructions

FirmwareNokiaLumia 530 or software update is carried out by downloading the installation package from the official Microsoft resource. The advantage of this method is that there is no need to use a cable, computer or programmer to update. The entire procedure is performed directly on the smartphone itself.

Why do you need an update on Nokia Lumia 530?

Firmware or updating of a smartphone is carried out in order to improve the performance of the device, gain access to new applications and correct previously identified bugs. As a rule, a new version of software has better performance characteristics and opens up new capabilities.

Important: you cannot update on a non-working phone if the smartphone is infected with a virus or freezes at loading. In these cases, it is recommended to contact a service center or perform a complete flashing of the device.

Nokia Lumia 530 firmware – preparatory stage.

Remove the SIM card and MicroSD memory card.
Wait until the battery is fully charged.
It is recommended to save data, photos, contacts and other important information first.
Free up enough memory on your phone, approximately 1.5 GB.
Ensure stable communication and uninterrupted power supply.

Important: Lost connection or low battery may cause smartphone firmware Nokia Lumia 530 may interrupt. This moment can lead to the fact that the phone stops functioning normally, in some cases it won’t even turn on!

Nokia Lumia 530 firmware in wireless mode.

The over-the-air update method (OTA) is carried out by installing software from the phone's memory, or in some cases from a memory card. As a rule, this procedure does not affect the contents of the user memory and smartphone settings.

Algorithm of actions:

Download firmwareNokiaLumia 530 to the phone's memory. By the way, some models support installing updates from a memory card. You can find out about the current version and the availability of a new update in the corresponding menu item on your smartphone. You can also set up automatic notification when a new version becomes available.
The downloaded package can be installed immediately or postponed until a more convenient moment.
Launch update. The procedure can take on average 15-30 minutes. It should be remembered that a global update takes much longer, about two hours.
Follow the instructions until a message appears indicating that the update process is complete.

Attention: normally, the process of updating the Nokia Lumia 530 smartphone may be accompanied by a reboot of the device. In case of reboot, you should not take any action, you need to wait until a message appears indicating that the update was successful.

You should remember that you need enough free memory on your smartphone. You should free up about 1.5 GB of free space because NokiaLumia 530 firmware may be quite large.
To save mobile traffic, it is recommended to use a Wi-Fi network to download.
Before starting the update, you need to fully charge the battery. You can also connect the charger to avoid draining the battery during the update process.
You cannot use your Nokia smartphone until the update is completed!

No similar articles

How to flash Nokia Lumia?

There are several ways to flash a Nokia Lumia smartphone based on Windows Phone. In this article, we will tell you how to do this using the official Nokia Care Suite application, which is suitable for any smartphone with Windows Phone 7 and 8.

Download Nokia Care Suite

The Nokia Care Suite application is designed for official firmware flashing of smartphones in specialized service centers. However, it can be freely downloaded online using a link from the official Nokia website. This way you will get NokiaCareSuiteForStore-2013.49.3.30 version.

After downloading, install the application, and if you have Windows XP, then also update Windows Media Player to the latest version.

How to flash Nokia Lumia: instructions

Launch the Nokia Care Suite application and select the Product Support Tool for Store utility. To search for firmware, open the “Tools > Firmware Download” menu and enter the Product Code of your smartphone. You can find out either through the application itself, or look at the battery, and if the battery is built-in, at the information next to the SIM card slot. This code is usually seven digits long and looks like 059xxxx. Having specified the code, click “Check online” - and the application will find the appropriate firmware, after which it can be downloaded using the “Download” button.

After downloading, disconnect your smartphone from your computer and close Nokia Care Suite, then open the application again and select the Product Support Tool for Store utility again. Go to File > Open Product and select your smartphone model number. It looks like RM-*** and is indicated on the box next to the barcode, as well as in the battery compartment and in the application itself.

After selecting the number, click the “Programming” button and then “Recovery”. Information about the selected firmware will appear. Click “Start” and wait for the error message to appear with a “Retry” button.

After that, connect your smartphone, hold down the volume down key and the power button on it, and in Nokia Care Suite press the “Retry” button. As soon as the smartphone vibrates, release both keys on it and hold down the volume up button. Wait until “Rebooting” appears in the Nokia Care Suite window. Then the Nokia logo will appear and flashing will begin. Once the process is complete, the smartphone will reboot on its own. After this, you will have to configure it again, since all parameters will be reset to factory settings.

You may also be interested in the article and other useful publications on our website in the section.

Selling used Nokia Lumia 530 Dual SIM

Nokia
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]

*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]
To access the service menu of the device, you need to dial *3001#xxxxx#, where xxxxx is the security code, which by default is 12345. Thus, to enter the menu you will need to dial *3001#12345# In this mode, for example , you can change the network operator name displayed in standby mode. To do this, select NAM1, scroll to the Alpha Tag sub-item, change it as desired (for example, write Vovochka and press OK. Exit the mode by turning the phone off and on.
It is possible that this code will also work on other phone models (51xx, 61xx).

*#0000#—birthday and phone software version
*#06#-on many imei phones
*#92702689# - some kind of *broken menu - I don’t know why
*#3370# and *#3370* - on and off call quality - something like that, but not all operators support this crap. Nokia itself was re-flashed v 5.79

NOKIA 5120&5125 service code:
In addition to the above, there are a couple more SERVICE CODE
1) *#639#(*#NEW#) is used to add a number, i.e. you can register several phone numbers and switch between them.

2) *#92772689#(*#WARRANTY#)
1) Serial number
2) Release date
3) Date of reprogramming
4) Date of last repair.
5) Includes data transfer
6) Total talk time.

3) *#837# or *#VER# phone version (not supported by all models)

4) *#9999# or *#6120# softa version (not supported by all models)

before changing anything in the settings
THINK WELL IF YOU CAN RETURN EVERYTHING IN PLACE LATER
ESPECIALLY IN POINT 1
It is not possible to change the operator name on all NOKIA models; in the latest models, this feature is blocked by the manufacturer.
the only (almost) plus of this code service *#3001#12345# is the ability to recover a “FOGOTTEN” password to turn on your mobile phone.
And the second plus is that the level of the received signal is visible.
NOKIA 2110
Show EMEI number *#06# >
Show phone software version *#9999# > or for 2110i *#170602112302# > or *#682371158412125# >
Show phone production date *#3283# >

3110
Show EMEI number *#06# >
Shows software version *#3110# >
Restores factory settings *#7780* >
Entering the special menu *#92702689# > Commands in the special menu:

5110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function #3370# >
To enable the EFR function *3370# >
To reduce the battery discharge rate and enable the HR (Half Rate) function *4720# >
To enable the HR function #4720# >
To disable SP encodings (provided that the device PIN code is enabled): When prompted for a PIN code, press “C”, then “up arrow” or “down arrow”. Press "C" until the display clears. Then enter the command to change the PIN code, but do not actually change it - **04*PIN*PIN*PIN# > The only problem is that this procedure will have to be repeated every time you turn on the device.

6110
To reduce electricity consumption, you can disable the EFR (Enhanced Full Rate) function #3370# >
To enable the EFR function *3370# >
To reduce the rate of battery discharge and enable the HR (Half Rate) function *4720# > then turn off and turn on the phone again.
To enable the HR function #4720# >
To view IMEI number *#06# >
Show software version *#0000# >
Entering the special menu *#92702689# > Commands in the special menu:
6232 OK shows the month and year of manufacture
7332 OK shows the date of the last change in the program
7832 OK shows the date of sale (if entered)
37832 OK, you can enter the sales date MMYY (be careful! You cannot change it later)
9268 OK shows serial number (IMEI)

7110
View firmware version *#0000# >
View IMEI *#06# >
Enter the service menu: *#92702689# > By successively pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2 MM/YY (issue date)
3 Date of purchase (here you can enter the date of purchase if your phone is new. Remember that the date is entered once and if you entered the wrong date, it will be impossible to correct it later!
4 Date of repair (if repairs were made)
5 Date transferred to user? ATTENTION: to exit this mode you need to turn off and turn on the device again.
Checking the card's support for SIM-clock-stop mode (only for firmware version 5.24 or later) *#746025625# >
Enable Enhanced Full Rate Codec (EFR): *3370# > will be enabled after phone reboot (consumes more power) Disable Enhanced Full Rate Codec (EFR): #3370# > and EFR will be disabled after phone reboot
Enable Half Rate Codec: (available only for firmware version 4.33 or earlier) enter *4720# >and Half Rate mode will be enabled after rebooting the phone Disable Half Rate Codec: enter Enable #4720# >and Half Rate Codec will be deactivated after rebooting the phone

Smartphones

*#06# - IMEI of the smartphone (IMEI number - consists of 15 digits, it is unique and every phone has it). This number must match the number on the box.
*#0000# - firmware number
safe mode ("PENCIL"+Power)
*#7780# - restore original (working) smart settings
*#7370# - reset the smart to factory settings (i.e. all software, contacts, calendar, etc. are deleted - the smart becomes clean!)
ATTENTION! To use the last two codes you will need to enter the phone lock code (default 12345)!
Safe Mode when you turn on the phone - “PENCIL” + “Power Buttion”
Loading into Safe:
1. Turn off your phone
2. Press "PENCIL" (and DO NOT release)
3. Press the power button
4. Hold the “PENCIL” until it is FULLY loaded!!!
*#2820# - unique address of the Bluetooth module of your device (may be needed by other devices that cannot display names).
*#7370925538# - clearing the “Wallet” (for 6600 and higher - which have a “Wallet”).
*3370# (phone must reboot) improves sound quality (using EFR), but reduces battery life.
#3370# - resets the sound quality to normal (cancels the *3370# code).
EFR CODEC (Enhanced Full Rate)
This feature, when enabled, should, in theory, significantly improve the quality of transmitted speech, but, unfortunately, it must be supported by the cellular operator. When it works, the phone's power consumption during talk time increases slightly (about 5%). As far as we know, none of the Russian mobile operators support this function. The principle is based on a different speech compression algorithm (ACELP) and occupies a wider frequency band.
*4720# - enable Half Rate Codec (HFR)
#4720# - disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly degrades speech quality, but saves battery by about 30%. Again, must be supported by your cellular operator.
*#92702689# - enter the service menu [*#war0anty#]

Secrets of NOKIA 6600 and other Smartphones

*#06# - IMEI of smartphone

*#0000# - Firmware number

*#7780# - Restoring the original (working) settings of the smartphone

*#7370# - Reset the smartphone to factory settings (all software, contacts, calendar, etc. are deleted - the phone becomes clean)

*#2820# - Bluetooth code (unique address of the Bluetooth module)

*#7370925538# - clearing the “Wallet” (for 6600 and above - and which have a “Wallet”).

Safe Mode when you turn on the phone - "ABC" + "Power Buttion" (in 3650 "ABC" is a "pencil")

Loading into Safe:

1. Turn off your phone
2. Press "ABC" (and DO NOT release)
3. Press the power button
4. Hold "ABC" until the phone is FULLY loaded!!!

And here is another additional way to format your phone (with the loss of all data), in case you can’t even dial the treasured code *#7370# or even start the handset: in the off state, press three keys at the same time, green for answer, asterisk and key "3". And now turn on the pipe without releasing the keys. Formatting will begin.

To use the codes *#7780# and *#7370#, you will need to enter the blocking code (default 12345).

##002# cancel all forwardings.

**004*number# enable forwarding of all calls to the entered number.

Secrets of NOKIA 3210, 3310, 3330, 8210, 8250, 8850, 9110

Shows phone serial number (IMEI)
*#06#

Software Version
*#0000#

1 Line - Version
2 Line - Date of release of the program. provision
3 Line - Phone type.

Warranty codes:
*#92702689# (= *#war0anty#)
You will be prompted to enter a type of "warranty code"

The service menu will be displayed on the screen:
IMEI (International Mobile Equipment Identification)
Phone release date MM/YY
Phone purchase date
Repair date
Transfer user data?

*3370# - Activation of full-bit encoding mode (Increases communication quality, reduces battery life)

#3370# - Deactivate full-bit encoding mode.
Note: After entering these codes, the phone will restart with new settings.

Check if you can stop SIM Clock:
*#746025625# (= *#sim0clock#)

Codes for determining whether LOC is installed on the device or not
Your Nokia can be blocked by 4 types of locks:
SPROVIDER-LOCK - 1
NETWORK-LOCK - 2
COUNTRY-LOCK - 3
SIMCARD-LOCK - 4

To check the status of these locks, enter the following line:
#pw+(MASTERCODE)+(y)#, where
- p = press * 3 times
- w = press * 4 times (in the original, on the contrary, w - 3 times, p - 4)
- + = press * 2 times
- MASTERCODE = exactly the thing that was used to lock your device. But to check the status, enter 1234567890
- y = number from 1 to 4

If your phone is locked by an SP (Service Provider) code that is unknown, then try the following:

1. The Pin code request must be enabled;
2. turn on the phone;
3. When asked for a Pin code, press C, then the up or down arrow;
4. press C and hold until the display clears;
5. Now enter the command to change the Pin code, but without changing it;
**04*Pin*Pin*Pin#
This operation must be repeated every time the device is turned on.

Half Rate Codec:
Inclusion:
*4720# - Half Rate will be activated after the phone is overloaded (power consumption is reduced)
Shutdown:
#4720# - Half Rate will be turned off after the phone is overloaded
Enhanced Full Rate mode allows you to get much better sound quality with the same number of bits of transmitted information, but it loads your provider’s network more, and the call time is reduced by about 5%

Half Rate mode degrades sound quality, but unloads the network and allows the provider to pass more calls through it, the duration of the call time increases by about 30%

Security code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code).
FAC = Final Assembly Code (For Nokia FAC=10).
SNR = Serial Number.
SP = Spare (always SP=0).

**04*oldPIN*newPIN*newPIN# - Change PIN code

**042*oldPIN2*newPIN2*newPIN2# - Change PIN2 code

**05*PUK*newPIN*newPIN# - Unblock PIN code

**052*PUK2*newPIN2*newPIN2# - Unblock PIN2

*#35# - Check the blocking status of all incoming calls

**35*code# - Activate blocking of all incoming calls

#35*code# - Disable blocking of all incoming calls

*#33# - Check the blocking status of all outgoing calls

**33*code# - Activate blocking of all outgoing calls

#33*code# - Disable blocking of all outgoing calls

*#330*code# - Check the status of blocking all calls

**330*code# - Activate blocking of all calls

#330*code# - Disable blocking of all calls

ANDROID CODES FOR Nokia Lumia 530 Dual SIM

*#06# - show IMEI Nokia Lumia 530 Dual SIM IMEI is an international mobile equipment identifier specified in the phone software. This function is necessary to unambiguously link the phone to the GSM network. You can find out the IMEI of your phone by dialing *#06# on your phone. After this you will see a 15-digit number. This is the IMEI number of your phone. Also, this number is duplicated on the phone box.

*#8888# - shows Hardware Version Nokia Lumia 530 Dual SIM

*#9999# - show the firmware version of Nokia Lumia 530 Dual SIM

*#8999*8376263 - Nokia Lumia 530 Dual SIM firmware data

*#8999*324# - various technical data

*#8999*636# - technical specifications of Nokia Lumia 530 Dual SIM

*#8999*523# - display contrast, the same as through the main phone menu

*#0523# - contrast

*#2255# - call log of Nokia Lumia 530 Dual SIM

*#0837# - display the software version

*#0001# - show serial number

#*7337# - unlock Nokia Lumia 530 Dual SIM

*#8999*377# - Nokia Lumia 530 Dual SIM error log

*#4777*8665# - setting up GPRS Nokia Lumia 530 Dual SIM

*#0020# - setting the default menu language

*#0007# - sets the text mode to Russian

*#9125# - setting emoticon modes in charging mode

*#7465625# - block list

*7465625*638*# - network blocking

*#9998*228# - battery status (capacity, voltage, temperature)

*#9998*246# - software status of Nokia Lumia 530 Dual SIM

*#9998*289# - change the alarm frequency

*#9998*324# - debugging screen

*#9998*364# - Watchdog

*#9998*544# - Jig detect

*#9998*636# - Nokia Lumia 530 Dual SIM memory status

*#9998*746# - SIM file size

*#9998*837# - Nokia Lumia 530 Dual SIM software version

*#9998*842# - vibration alert test for Nokia Lumia 530 Dual SIM

*#9998*872# - diagnostics of Nokia Lumia 530 Dual SIM

*#8999*8378# or *#8999*test# -Test Mode

*#9998*999# - last check

*#9998*523# - contrast

*#9998*947# - reset in case of a critical error (entered without a SIM card, deletes all files, may cause the camera to malfunction)

*2767*3855# - full EEROM reset (SP unlock, but can change phone IMEI)

*2767*2878# - user reset EEPROM

*#0228# - find out battery temperature, type and charge of Nokia Lumia 530 Dual SIM

*#9998*JAVA# - JAVA - CSD and GPRS settings for the Internet Nokia Lumia 530 Dual SIM

*#9998*VERNAME# - extended information about firmware, hardware, time and date of software creation, etc.

STANDARD GSM CODES FOR Nokia Lumia 530 Dual SIM

Change PIN - **04*, then enter the old PIN, and the new PIN twice.
Change PIN2 - **042*, then enter the old PIN2, and the new PIN2 twice.
Unlock SIM card (PIN) - **05*, then enter PUK and new PIN twice
Unlock SIM card (PIN2) - **052*, then enter PUK2 and new PIN2 twice

Call forwarding Nokia Lumia 530 Dual SIM (you must order the service from your operator)
Cancel all forwardings - ##002#
Cancel all conditional redirects - ##004#
Activate all conditional forwardings - **004*Phone number#

Unconditional forwarding (forwarding all calls)
Turn off and deactivate - ##21#
Deactivate - #21#
Enable and activate - **21*Phone number#
Enable - *21#
Check status - *#21#

Forwarding in case of "no answer"
Turn off and deactivate - ##61#
Deactivate - #61#
Enable and activate - **61*Phone number#
Enable - *61#
Check status - *#61#

Setting the call time before the "no answer" call forwarding is triggered
When setting up call forwarding on "no answer", you can set the time in seconds that the system gives you to pick up the phone. If you do not pick up the phone during this time, the incoming call will be forwarded.
Example: - **61*+709576617601234**30# - sets the wait time to 30 seconds
Set the waiting time - **61*Phone number**N# , N=5..30 (seconds)
Remove previous installation - ##61#

Forwarding in case of "not available"
Turn off and deactivate - ##62#
Deactivate - #62#
Enable and activate - **62*Phone number#
Enable - *62#
Check status - *#62#

Forwarding when busy
Turn off and deactivate - ##67#
Deactivate - #67#
Enable and activate - **67*Phone number #
Enable - *67#
Check status - *#67#

Call barring (you must order the service from your operator)
Change password for all bans (default - 0000)
- **03*330*old password*new password*new password#

Activate - **33*password#
Deactivate - #33*password#
Check status - *#33#

Barring all calls on Nokia Lumia 530 Dual SIM
Activate - **330*password#
Deactivate - #330*password#
Check status - *#330#

Barring all outgoing international calls on Nokia Lumia 530 Dual SIM
Activate - **331*password#
Deactivate - #331*password#
Check status - *#331#

Barring all outgoing calls on Nokia Lumia 530 Dual SIM
Activate - **333*password#
Deactivate - #333*password#
Check status - *#333#

Barring all incoming calls on Nokia Lumia 530 Dual SIM
Activate - **353*password#
Deactivate - #353*password#
Check status - *#353#

Barring all incoming calls when roaming
Activate - **351*password#
Deactivate - #351*password#
Check status - *#351#

Call waiting Nokia Lumia 530 Dual SIM (you must order the service from your operator)
Activate - *43#
Deactivate - #43#
Check status - *#43#

Send your phone number (Anti Caller ID)
Deny - #30#phone number
Allow - *30#phone number
Check status - *#30#

Display the phone number of the person calling you (Caller ID)
Deny - #77#
Allow - *77#
Check status - *#77#

Questions about Nokia Lumia 530 Dual SIM secret codes

Idk	10.07.2018
Codes don't work

Ask a question about secret codes on Nokia Lumia 530 Dual SIM

Flashing your phone's firmware is sometimes the only option to restore its stable operation without having to contact a service center or private technicians.

Let’s say your smartphone starts to freeze, won’t turn on, doesn’t respond to commands, can’t update, can’t find the network, etc. In such cases, it is not necessary to immediately contact specialists; you can first try to reboot, reset the settings, or, as a last resort, reflash it with the official Windows Device Recovery Tool.

If you are looking for information on how to flash your Nokia, Microsoft Lumiya or any other smartphone based on Windows Phone and Windows 10 Mobile yourself at home, then these instructions will help you with this.

Firmware for smartphone on Windows Phone 8, 8.1, 10 via computer

Important! Before you start flashing your device, make a backup copy of your data, as all files and documents will be deleted. After the procedure, you will receive a completely clean phone. Read how to backup data through the Windows 10 Mobile interface. You can simply transfer all the files to your computer.

What is required for the firmware

PC or laptop with Windows 7, 8, 8.1, 10 installed;
Working USB cable and port;
Firmware program;
The victim itself, whose battery must be charged at least 50% (preferably fully).

Download and install Windows Device Recovery Tool

This program is specially created for updating smartphone software. You can download it for free from the official Microsoft website at.

Download the installation file;
Install the utility;
We launch it and connect the phone to the computer.

Step-by-step flashing process

Important! Before you begin, keep in mind that you cannot turn off the device during the procedure. It is also prohibited to close the program, turn off the computer, etc. Otherwise, instead of a smartphone, you will get a lifeless brick.

So, we launched the program and connected the smartphone. The following window will open:

Click on the image with the device, after which we see information about the available firmware version. Select "Reinstall software".

Click “Continue”.

In the next window, you can leave nothing marked and select “Continue without filling.”

and then installing it.

After some time, the phone’s firmware will be completed, click “Finish”.

In this simple and official way, we updated the software of our smartphone. After this, the device will reboot several times and you will need to configure it before the first launch.

First launch after flashing

After the smartphone starts, you need to select a language and continue setting up by accepting the terms of use.

In the next step, you can select the type of settings - recommended or custom. If the latter, then I advise you to uncheck all the boxes except the first two and last two points. After this, you need to configure the region and time: set the country, time zone, exact date and time.

This firmware method is suitable for all phones (for example, models 520, 535 Dual Sim, 800, 920, 710, 610, 925, 620, 914, 630, 510, 525, 1020, 620, 625, 635, 820, 900, 830 , 430, 435, 1520, 930, 640 XL, 550, 735, etc.).

This utility can also flash Windows phones from other manufacturers, such as LG, BLU, Alcatel, Acer, HTC (One M8 and 8X), VAIO, UniStrong, HP.

If you have Nokia and it does not work on Windows Phone, then for firmware there is a program called Nokia Software Recovery Tool, which you can download from