How to connect and configure wired Internet through a router. How to install and connect a wireless Wi-Fi router How to install a wireless router

The site invites you to read the article on connecting the network and the Internet using a WIFI router; we will try to connect the WiFi router yourself without calling a specialist to your home. There are two types of routers - without Wi-Fi and with it, let's try to configure our computer and router to use a wireless network.

And so we have a router in stock, no matter what manufacturer your router is, the principle of connecting WiFi routers in most cases is the same for different models. Now almost every house and apartment has a device that supports WIFi connection, laptops, phones, TVs, smartphones, tablets, game consoles and printers.

How can you connect the Internet yourself through a router, and organize a rough diagram of how the Internet works at home? All we need is a communication channel that comes to your home using a regular network cable or a coaxial cable (in the form of an antenna). In this review, we will look directly at connecting a computer and laptop to an access point. Now let's take a closer look at the WiFi router itself and what it is. Externally they may differ, but the rear panel has the same outputs and connectors.

And so we see an interface for connecting the incoming Internet, as well as a couple of interfaces for organizing an internal network using cables. The incoming Internet can be a regular network cable, or a telephone cable if you have an xDSL connection. In addition, there are also USB modems, but they are rare.

To connect a computer to a WIFI router, we need a wired network cable (Patch Cord). Even if your desktop computer has built-in Wi-Fi, it is recommended to connect using a cable. This is the fastest connection method, providing a reliable connection between your computer and the router. If your router is still located far from the computer, you can connect it via WiFi, but I recommend using a cable. Since you will not carry the system unit with you like a phone or laptop, it would be more advisable to use a cable. The patch cord usually comes with any WiFi router and looks like this:

In addition to the computer, a cable can be used to connect a TV and other devices that require a more stable connection to your router. You can, of course, use a WiFi connection, it’s just that a wired connection is initially designed for higher bandwidth. The cable is plugged into one of the free ports on the router LAN1 or LAN2, etc., and the second end of the cable is inserted into the system unit as in the figure:

Next, we wait until the access point gives our computer a network address, and go to the router to configure it directly. Typically, the network address for a router is 192.168.0.1 or 192.168.1.1. This address is specified in the router instructions. If you entered the address correctly, a window will appear asking you to enter your name and password for authorization. The password and login are also indicated in the instructions. If they suddenly don’t work, you can use the Reset button and reboot the WiFi router.

Let's say you get into the modem interface, all that remains is to check and configure the type of your Internet connection.

The first thing you will need to do is replace -, which the router will distribute, and turn off broadcasting of this name publicly. To do this, enter the network name and uncheck the box next to “Enable SSID broadcasting”. Don't forget to click "Save" and write down the given name in your notepad.

Now the name of your network will not be visible to third parties: instead, they will see a message that there are some “Other networks”, and without knowing your SSID they simply will not be able to connect to your router, which will increase its security. To connect to the router via -, you also need to specify the encryption type (the “Wireless Security” tab).

Select encryption and set a password

For maximum security and internet speed, the best choice is WPA2. Enter the password for your wireless network and write it down. Click “Save”.

There is very little left to figure out how to connect to the router. Some models will need to be rebooted for the entered network name and password to take effect. In this case, you need to select “System Tools” and then “Reboot”.

As soon as a user, in addition to a computer, begins to use another gadget to use the World Wide Web, he immediately faces the problem of providing him with Internet access without incurring additional communication costs. But, more often than not, there are even more than a few home devices with the function of surfing the global network. For an optimal solution to the problem, as a rule, a device distributes the Internet, i.e., routes it to all computers and gadgets available at home.

However, simply purchasing this device in a store will not solve the problem, but you also need to know how to properly connect the router. Below, in simple words with pictures, is all the steps on how to connect the router to a computer using Wi-Fi or a “patch cord” cable for the router, as well as how to correctly connect a wireless router so that everything works well later, and as people say - it becomes Wi-Fi, making the Internet available where it is needed.

In order to eliminate frequently encountered difficulties, at the end there is a guide on how to correctly connect a router to a router and configure them. The instructions presented are equally applicable to any models of wireless and wired access points.

The essence of the device

Before proceeding directly to the issue of connecting the device, you need to know the basic principle of its operation. Advanced users can simply skip this section of the guide and move straight to the next one.

A router is a device that independently connects to the global network using the parameters entered into its interface; in fact, this small-sized device acts as a computer, but with a routing function, so the router can distribute the Internet to many devices via Wi-Fi or cables.

Only the router itself is physically connected to the worldwide network; the router is assigned a specific IP address. Therefore, you will not need to pay additionally for many computers or smartphones connected to it, of course, if no additional services have been purchased.

Connection procedure

The router itself is very simple, and it is not necessary to have a significant amount of knowledge for this. On the body of all routers there is a special “Internet” socket, where you need to connect a wire from your communication service provider (this connector is called “WAN”).

Next to it are the “LAN” connectors; it is to one of them that you need to connect a patch cord to the network card of your PC or laptop. And also through these ports, wired communication is carried out with various set-top boxes, Smart TV, additional computers, etc., which also play an important role for the home.

Now let’s look at the question posed step by step, how to connect the router. You only need to perform a few sequential steps:

1. Insert the wire from the provider into the “WAN” connector;
2. Using the supplied wire, establish a connection between any of the router’s “LAN” connectors and the same slot on the PC’s network card;
3. Supply electricity to the device through the supplied adapter, connecting it to a 220 V network. Then, if available, press the “On” key. activate the device on the router case (special indicators on its case will light up);
4. Ready! The router is connected. All that remains is to enter the necessary settings.

It is possible to connect the router for further configuration without having a cable connection to the PC, but by connecting to it via Wi-Fi. But this is a less reliable method. Especially when this is done by a beginner, after entering the parameters, having already connected again, malfunctions often appear. Of course, they can be quickly eliminated, but if the owner of the device is insufficiently experienced, correcting them will require a significant investment of nerves and time. Therefore, it is strongly recommended to use a wired connection to enter settings.

Procedure for connecting an ADSL router

The principle of operation is completely similar to the algorithm described in the previous section of this manual, but this router does not have a WAN port and is replaced by a connector called “Line”. After connecting, you can immediately begin entering the ADSL Wi-Fi router settings.

How to connect a router to a router?

If you need to cover a large area with wireless signal coverage, for example, in the case of a large apartment or house, then this is effectively done by connecting router to router. This is guaranteed to increase the Wi-Fi coverage radius.

This can be shown schematically as follows:

In total, there are 2 main methods for achieving the task:

1. Using cable;
2. Via Wi-Fi.

1 method: Wired

You will need a cable called twisted pair cable that is long enough to connect 2 routers to each other.

To connect, you must perform the following steps:

1. Install one end of the wire into the “LAN” socket of the router connected to the global network;
2. Insert the other cable plug into the “WAN” connector of the 2nd router;
3. Next, enter the settings in the 1st router to configure it for the Internet provider, and in the 2nd router for dynamic ip.

Method 2: via Wi-Fi

If it is not possible to stretch the wire between the devices (which is extremely common), then you will have to use the second method, which is characterized by the complexity of the settings, so we will pay more attention to it in this guide.

The user has access to a router with access to the global web (let’s call this router “1st”) and another device for use as a repeater – “2nd”.

At the first stage, you need to connect “1st” to the PC and configure the Internet on it. Then connect the “2nd” to the PC and configure the connection to the access point.

The algorithm of actions includes the following sequential steps (given for the Windows 7 operating system, but the algorithm is completely similar, with minor changes, for other versions of Windows):

Recently, more and more subscribers of Internet providers are puzzled by the question; how to connect and configure a router using an existing router; with or without WiFi?! For what? There may be several events. The first and most common reason; The WiFi coverage area of ​​the existing device is not enough for the entire apartment or house and it needs to be expanded somehow. The second reason; saving money. Let’s say one person has connected the Internet and the tariff is 100 Mbit. And his friend lives next door. And so they decide to use the same Internet channel together, both want to have a wireless network. Another reason; When you connect to your provider, you have already been given an access device: a modem or an optical terminal, but its functionality is lacking. Connecting another one to the existing wireless router will help them with this. In this article I will tell you how to do this more correctly and give two ways to set up a router-to-router network: via WiFi and via cable.

Method 1. Connect via WiFi.

This method, in my opinion, is more correct; one device simply extends the WiFi coverage of another. In general, at first there was simply a repeater mode, which was either supported or not. Later a new development appeared; WDS, which manufacturers of wireless devices have begun to actively implement in their creations.
WDS (Wireless Distribution System) is a special development that allows you to expand the coverage area of ​​a Wi-Fi wireless network by combining several access points (or several WiFi routers) into one network without the need for a wired connection between them. The main requirement when organizing such a network is; All WDS base stations in a network must be configured to implement the same frequency, encryption method, and encryption key.
As a result, in order to connect a router via WiFi, the first one should simply distribute the wireless network and no additional options need to be made on it. And the second one must be able to work in repeater mode, or support WDS technology, which is practically the same thing. To know; can your device do this? You can either go to the manufacturer’s website or go through the settings. As an example, I'll look at two wireless routers that can be connected to others via WiFi. 1st; Asus RT-N12 D1, which can work as a repeater. And the 2nd example; TP-Link supporting WDS technology (TL-W741ND, TL-W841ND, TL-W941ND, TL-W1043ND).

Connecting an Asus router to a network via WiFi

In order to switch Asus into repeater mode, you need to go to the web interface, find the Administration section; and on the Operating mode tab; check the Repeater mode box:

This is a list of available wireless networks. You need to find an existing network, enter the network key (password) and click the Connect button;. After this, Asus must connect to the network, obtain an address and expand its coverage area.

Connecting a TP-Link router via WiFi

Most modern TP-Link models have WDS support. In order to configure the connection of 1 router through another, you first need to go to the Wireless Settings section of the web interface; and check the box Enable WDS;:

Some more options below will become available to you. Click the Search button and see a list of Wi-Fi wireless networks available for connection:

We find ours among them and press the Connect button;. After this, you will be taken back to the Wi-Fi functions, where you will need to enter the network password and click the Save button. After this, TP-Link will connect to the 2nd access point as a repeater and expand its wireless network coverage area.

Method 2. Connect via LAN cable.

The router-to-router method of creating a wired network will suit you if the distance between them is more than 30 meters. There are 2 options for connecting routers with a network patch cord:

; Option 1. Connect the LAN port of the 1st device and the WAN port of another. The second device will work as an ordinary client of the first one and will have its own, separate . With all this, it is important to connect the devices to each other correctly. The ports must be connected as shown in the photo:

In other words, you must connect one of the LAN ports of the first device, into which the provider cable comes, with the Internet (or WAN) port of the second. I would not recommend connecting them via LAN ports (although I discussed this option below), since this is not entirely correct. After this, you still need to configure everything correctly. On the first router, in principle, you don’t need to do anything. The only thing; Check that the DHCP server is enabled in the LAN section. On the second; You need to go to the WAN section and select the Connection Type; ; Dynamic IP; (WAN Connection Type; Dynamic IP):

After this, you will need to configure the WiFi network in the usual way, save the functions and reboot the device. After which, the second device must obtain an IP address from the network of the first one and work as one of its clients, distributing what it has already acquired to its clients.
By the way, on some WiFi routers the connection type is; Dynamic IP; used by default, at industrial settings. These include devices from D-Link:

Here, to connect it to another, you just need to connect the cable and set up the Wi-Fi network.

; Option 2. Connect the LAN port of the 1st device and the LAN port of the other. In this case, both devices will logically be located in the same sector of the network. With all this, the wireless networks of both routers will have related addressing, but different network names; SSID Setup: First, you need to disable the DHCP server on the second device:

Later, if they have the same IP address on the local network, then it is necessary to change it on the second device to another one so that there is no conflict:

The second router must either be assigned an IP address in the same subnet, but somewhere at the end of the range; for example, 253rd or 254th address. Or change the subnet altogether to 192.168.2.x for example. Don't forget to save the features.

I have listed the more optimal, in my opinion, methods for the connection function. If you have any other ways to organize a network via cable or WiFi between routers; write in the comments.

Today, most modern apartments and houses are equipped with wireless Wi-Fi, which allows all computers and mobile gadgets to freely access the Internet. If you don’t have Wi-Fi at home yet, then most likely you opened this article to remedy the situation.
So, what do you need to connect to Wi-Fi at home? Below we will look at the main steps, where, in fact, you need to start to set up wireless Internet at home.

What is needed to connect Wi-Fi at home?

Step 1: concluding an agreement with the provider

You can skip this step if you already have the Internet connected to your home, but it only works via wire.

Today, Russian providers offer users three types of Internet connections: ADSL, FTTB and xPON.

You can check whether your home is connected to the services of a particular provider on the official website, where, as a rule, there is a page for checking the connection by house number. The situation is such that even in large Russian cities on sparsely populated streets in houses there is no provider equipment, which means the only option is to use ADSL, which is offered by the telephone operator (aka provider).

As a rule, the provider’s website offers you to choose one of the desired tariffs, each of which differs in available Internet speed and additional functions. So, as a rule, the cheapest tariff will provide limited Internet connection speed during the day and unlimited speed at night.

An expensive tariff will provide Internet without restrictions, but will also allow you to connect to IP television with a certain number of free HD channels.
The choice of tariff is made solely on the basis of your financial capabilities and preferences. But we draw your attention to the fact that if you are not going to purchase a Wi-Fi router separately, make sure that it is provided free of charge by the provider at the chosen tariff.

Having chosen a tariff, you will usually be asked to either call the provider or fill out a form to call a specialist.

Next, at the agreed time, a specialist comes to you, who enters into a service agreement with you, provides equipment, and immediately connects it (the task is easier if the provider provides its own router).

Step 2: purchasing a Wi-Fi router

If you have a wired Internet connection or if you were not provided with this equipment when concluding an agreement with your provider, you must purchase it separately.

If you purchase a router separately, then this task must be approached with all responsibility, taking into account many nuances when choosing. How to choose the right Wi-Fi router for your home has already been discussed on our website.

Step3: connecting the router to the computer

So, you have everything to set up the Internet - all that remains is to configure it. Until the router is configured, Wi-Fi will not work on it. You first need to connect the router to your computer.

Time does not stand still, and with it we all observe the development of technology. The number of gadgets using the Internet is steadily growing, and therefore it is advisable to provide yourself with convenient access to the World Wide Web. Tablets, laptops, TVs, smartphones - all this variety of digital equipment requires a Wi-Fi network. Below we will tell you how to install a router yourself and get wireless access to the Internet.

What should I know before installation and connection?

Solving work issues, studying and searching for information, entertainment, making payments and other operations are carried out every day by many of us. If you need to simultaneously connect more than 2 devices to the Internet in your apartment, you should think about buying a router. With its help, you can access the Internet from different devices. Routers come in several types, with some differences between them. It's worth knowing about these differences.

Types of connection

The most popular among buyers is a router with an Internet connection. Essentially, this is a standard network cable with the ability to connect to a computer. A twisted pair cable is connected to the router for wireless distribution of unlimited traffic. The main convenience of the device is the ability to simultaneously use several gadgets anywhere in the house. The connection speed reaches 1 Gbit/second, which depends on the capacity of the network card, as well as the service provider.

Another option - ADSL - provides a connection via the telephone network. This method is optimal for the private sector, where the ability to connect to a wired Internet is often not available. However, in this case there is a significant disadvantage - the speed limit (24 Mbit/second is the upper limit).

LTE connection is the third router option. It provides a wireless connection using 3G and 4G networks. At the moment, the third option for accessing the network is the most expensive for the user, as a result of which its distribution remains minimal. Once you've identified the right router for your home, start figuring out how to install the equipment. First of all, you will need to decide on the choice of installation location.

Location

Where to place and where to hang the equipment? Many router buyers are interested in this. When deciding to install a Wi-Fi router yourself, know: before connecting, it is recommended to determine the optimal location of the equipment in the house or apartment, avoiding placement on concrete lintels. It is also not recommended to place the distribution device in remote areas of housing, since otherwise the signal quality may be poor. The best option is to place the device on the wall in the center of the room. Immediately after receiving an answer to the question of where it is best to place the router, it is reasonable to configure the equipment.

Where to start connecting?

The cable should be connected to devices that are de-energized. The network cable located on the back panel of the router (the socket marked WAN) is connected to the designated connector. If you have resorted to an ADSL connection, use the splitter included in the kit. This component serves to separate Internet and telephone signals.

To set up Wi-Fi, you will need a network cable (supplied as standard). Connect the cable to your computer. This procedure is performed to direct to the administrative panel of the device. Let's look at the connection procedure, taking as an example the establishment of connections from routers manufactured by TP-Link. The principle of connecting a router from different manufacturers is approximately similar. Now you can consider that you have figured out how to install equipment in an apartment or house.

We visit the administrative part

To visit the interface, you will need some data, including IP, login and password. Information is indicated on each device in its lower part. It is worth noting that most router models have the same login information: address – 192.168.1.1.

1. The browser line is filled with the address
2. After the data has been entered and confirmation has been entered, you will see a window for entering personal data - login and password (by default - admin)
3. Now go to the administrative part, where you will need the DHCP Server tab. Open it
4. Check Enable to activate the server
5. Click the "Save" button

During the installation process, the type of connection matters. Be careful when installing and configuring equipment!

Connection type

Do you know anything about the connection type? Find out information from the service provider, because without correct data about the functioning of the Internet it is worth forgetting. The simplest option is a “dynamic IP address”. Select this type of connection, and then click the “Save” button. Sometimes you may additionally need to fill in the “Tail Name” field.

Less commonly, you can come across a static address that requires an additional step - filling in the fields with the IP address. In this case, you need: a default gateway, a subnet mask, and a DNS server. If you are using a PPPoE connection, you must fill in the fields with personal information (name, password and confirmation). After installation and connection setup, wireless mode is established.

About setting up Wi-Fi

To set up Wi-Fi at home, the following algorithm is provided:

1. To configure Internet access, you need to use the “Wireless Mode” tab (the name of the tab may differ slightly)
2. Now you need to enter the SSID name of the network, and then select mode
3. If you are not sure that all devices support n-mode, prefer the mixed bgn option
4. You will need to save the settings, reboot the equipment

Now let's look at how to connect to the Internet in protected mode. You will need the Network Protection section located in Settings. Select WPA-PSK/WPA2-PSK encryption mode and a 12-character password. In the future, the password will be useful when entering data on each gadget.

Possible difficulties

If you can't log into the administrative panel, try changing your browser. Sometimes owners of different devices may experience similar difficulties when using the Google Chrome browser. Be extremely careful when entering the router's IP address. When replacing a router, some difficulties may arise with the address. After setting up your router, are you experiencing a weak wireless signal? Nothing better than changing the location of the router will help. In the settings of some equipment models, it is possible to select the signal power level.

Some equipment models have removable antennas that can be replaced with more powerful ones. Thanks to this action, you will be able to expand your coverage area without having to replace your router. All stages of connection and configuration are easy to perform yourself, however, if difficulties or controversial issues arise, we recommend that you contact a competent specialist.

Video:

Conclusion

The above instructions are for users of various router models, regardless of manufacturer. Distinctive features between different router models can only be observed in the administrative panel interface or minor nuances. Do all the steps correctly and enjoy high-quality and high-speed wireless Internet with any device.

There are several ways to connect to Wi-Fi from a mobile phone (Android and iOS) or from a computer. In the instructions, we will also look at what problems you may encounter and how to solve them. We will also consider in detail the issue of setting up a network connection through the interfaces of the router itself and Windows.

How to connect Wi-Fi on your phone

Every modern smartphone has a Wi-Fi module in its hardware. Typically, you can connect your device to Wi-Fi in just a few steps. Use the quick access menu or connect through your phone settings. These steps for devices running iOS and Android will be described in more detail below.

On iPhones

Modern versions of the iOS operating system have a quick access menu, which is called up by swiping up. If your phone automatically connects to your home network, then you can safely turn on Wi-Fi through the bottom toolbar. Press the wireless connection indicator until it lights up and becomes active. Afterwards, you will automatically connect to a known network.

If this is your first time connecting to a home or public network, you must complete the following steps:

Now you know how to connect Wi-Fi on any iOS device.

Possible problems and solutions

There are situations when a phone or tablet does not connect to Wi-Fi. The first and most common problem is a password-protected access point. You need to enter it in the appropriate field when connecting.

If the point does not have a password, but you cannot connect, take the following steps:

• check the Internet connection to see if the network is accessible from a computer or other device;
• make sure you are close enough to the router;
• make sure that automatic IP address distribution is enabled (DHCP function);
• reboot the router;
• reboot your mobile gadget;
• reset your router.

If other devices connect to your wireless network without problems, this means that the problem is with a specific mobile phone. We recommend taking it to a service center for diagnostics.

On Android devices

Despite the differences between Android and iOS, fundamentally connecting to Wi-Fi follows the same principle. To access the quick menu, swipe down on the unlocked screen, and then tap the corresponding Wi-fi icon.

Users can activate Wi-Fi through settings:

1. Go to your phone settings.
2. In the wireless networks section, click on WLAN (or Wi-Fi).
3. Move the slider to the activated state, and among the available networks, click on the desired one.
4. Enter your password if the system prompts you for one.

If you encounter problems, follow the same steps as described in the troubleshooting section for iOS.

If the connection to the router is hidden

When devices are connected to Wi-Fi, a corresponding icon appears at the top. However, in some situations, you may not be able to connect to a wireless network because it is hidden. The user will not find it in the search list. To connect to a hidden wireless access point, follow the instructions:

If all parameters are entered correctly, the phone will automatically connect to the hidden network. Make sure you are within its coverage area.

When DHCP is disabled

When trying to connect to the router, the user may see a persistent “Obtaining an IP address” message. Each device connected to the router receives its own IP address. DHCP (Dynamic Host Configuration Protocol) is responsible for the function of distributing addresses. It may be disabled on some routers, so you must enable this protocol manually.

To activate DHCP, you need to go to the router settings. How to do this is described in detail in the subsequent paragraph “Access via the web interface”. Once you are in the settings, find the DHCP (or equivalent) section, and then select the Settings sub-item. It should enable the Enable inscription. Click "Save" and reboot your device.

DHCP may be disabled due to a problem in the router. Try a hard reboot. Press the button on the back of the router that says reset, and then hold it down for more than 5 seconds. Your password settings will be lost, but this will allow you to restore DHCP functionality.

Connecting Wi-Fi on a laptop

If you are connecting to a wireless network via a laptop, follow these steps:

WPS technology allows you to connect to the router quickly and easily. Using it, you do not have to enter a password on your computer or laptop. To do this, go to point 3 of the previous instructions. As soon as the password entry window appears, find the button on the router that says WPS, and then click on it. The laptop will automatically connect to the network.

WPS is often disabled by software. You can activate it in the router's web settings. Go to the WPS section, and then click the “Enable WPS” button. If necessary, you can add a new device through the web interface by clicking the “Add device” button.

Now you know how to connect to Wi-Fi with a password.

Enabling on the case or using a keyboard shortcut

On some laptops, Wi-Fi is disabled by hardware. It must be turned on before connecting to a wireless network. The first way is to press a special button. Some manufacturers place a similar key on the keyboard or on the side of their devices.

You can also connect your laptop to Wi-Fi using key combinations. On many models, there is a button among the functional ones (F1-F12) to activate Wi-Fi. It should display the appropriate icon. To activate Wi-Fi, you need to press it together with the Fn key.

These are current ways to connect your laptop to Wi-Fi using buttons.

Do you want to install Wi-Fi so you can use the Internet and be able to access the network from any device? But there is only one catch: how to properly install a Wi-Fi router (router) - a device necessary for creating and connecting computer networks?

After all, you have never done this and have no idea about installing this device. This article will help you solve your problem.
You can connect a WI-FI router in 2 ways:

• Wireless connection.
• Wired connection using twisted pair (a special network cable that comes with the router).

Choosing a router

The first step is to choose the right equipment. It is worth noting the fact that not all models of Wi-Fi routers are suitable for laptops. It is necessary to study the parameters of a computer or laptop and accordingly purchase a router with suitable characteristics. Before purchasing, check with the seller about the signal transmission range of the router.

Before purchasing a router, you need to clearly understand what kind of local network you need to build - for personal use in the apartment from all gadgets, or to build a powerful network with internal storage in which various files will be stored - music, videos, documents. In the first case, not very expensive models are quite suitable - within 1,500 rubles.

In the second case, you will need more powerful and expensive equipment, for which you will definitely have to prepare about 5,000 rubles, or even more. It is very important that the router has high performance, supports the IEEE 802.11n wireless standard, and supports gigabit speeds. You can read more about this in the corresponding article.

Router connection steps

If you plan to connect the router via a wired connection, then the sequence of your actions should be as follows:

Setting up a wired network

First, go to the menu, from there go to the “Network” tab (internet setup), and then click on the “Connections” tab (manual internet connection setup). Next, look at the screenshot.

In the “IP Settings” tab, assign a network address to the LAN ports, as well as a subnet mask. These settings must be specified in the Internet connection agreement. Or call your office and get this information from a specialist.

The router can be configured so that the network address can be obtained automatically if it is connected to another router. Don't forget to click the "Save" tab.

Establishing a wireless connection

To install the router, in the router menu you need to go to the “Wi-Fi” (Wireless setup) tab. Then select manual wireless connection setup. Do everything as in the screenshot.

In this case, Wi-Fi is configured in 2 stages:

• Basic settings.
• Setting up network security.

Go to the main settings and in the “SSID” field you need to come up with and enter a name for the Wi-Fi network. This name will be displayed on the computer in the list of all found networks. The next stage is choosing a country. Select the channel in which the data will be transmitted; it is better to leave it in automatic mode.

The next step is to select Wi-Fi standards; it is recommended to choose a mixed one. The final stage is choosing the maximum number of clients that can connect to the network. If you need to select an unlimited number of users, then select 0.

Be sure to set up Wi-Fi security to protect yourself from those people who like to surf the Internet at someone else’s expense. Here you need to enter a password to connect to the Internet. Go to “Security Settings”. In the top line you need to select the type of protection; it is better to give preference to WPA2-PSK, since this protection is the most resistant to hacking.

Enter the password in the “key” field. We leave the encryption settings at default. By clicking the “Change” button, the password is activated.
Be sure to save all settings and reboot the router.

If you did everything correctly, all the network connection indicators on the router are on, then you can start using the Internet, everything works.

Have you already connected a wifi router?

Do you want to be smarter than others? Earn more? Read also:

• . Have you tried that?
• . It is advisable to always know how many pages are in the index.
• ? Or is it still not?