How to connect and use wireless headphones. Bluetooth earpiece: tips for using How to use a bluetooth headset

Instructions forBluetoothheadset

Charger:

The headset has a built-in lithium battery; charge the battery to a full charge before use.

2. Connect Charger to the headset, through the charging port.

3. During charging, the LED indicator will be on, after the battery is fully charged, the indicator will turn off.

Note:

1. A full charge takes about 90 - 120 minutes.

2. When charging for the first time, please charge the device for at least 4 hours.

3. The first 3 charges should be carried out only after complete discharge until the headset is fully charged.

4. The device will charge at temperatures between -10 and +45 degrees Celsius.

Turn on/off:

1. Hold the "On" key pressed for about 3 seconds, until the indicator turns on, the device will be turned on.

2. To turn off the device, hold down the "On" key for about 3 seconds; after the indicator flashes 3 times, the device will be turned off.

Establishing a connection with a mobile phone:

1. Make sure the headset is turned off before making a connection.

2. Turn on the Bluetooth function on your phone.

3. Keep the "On" key pressed for about 5 seconds; the indicator will flash red and blue alternately (for Jabra and Motorola headsets, the indicator will be lit), this means that the device is in pairing mode.

3. Search for new Bluetooth devices on your phone.

4. In the device window of the mobile phone, you will find the inscription "SANYO BL812", "Jabra" or "Motorola".

5. Select the line "SANYO BL812", "Jabra" or "Motorola" and create a connection.

6. Enter the pin code of the connection 1234 for "SANYO BL812" or 0000 for "Jabra" and "Motorola", press the “yes” button, the indicator will stop flashing red and blue alternately, and start flashing blue (for Jabra and Motorola headsets, the indicator will stop constantly glowing blue and start flashing blue). This means that the connection was successful.

7. After connecting the headset to the phone, be sure to restart the headset (turn it off and on after 10 seconds).

8. Now the headset will be in standby mode, you can make and receive calls.

Note:

1. If the connection is not established within 90 seconds, the headset will automatically enter the ready mode. However, you cannot use the headset. Repeat steps 1-6 to create a connection.

2. When creating a connection; the recommended distance between devices is less than 1 m. In this case, there should be no metal obstacles between the devices. This headset has a pin code "1234" or "0000". Different mobile phones have different setup methods, please refer to the manual of your phone model for instructions.

3. If a connection is created, it will be saved even under the following circumstances:

1) the device will be turned off

2) one of the devices stopped working

3) one of the devices will be rebooted

How to receive calls:

1. When you receive a call, press the "Talk" key after you hear the call.

How to end a conversation:

1. After the conversation ends, press the Talk key to end the conversation.

2. You can also wait until your interlocutor disconnects, then you will disconnect automatically.

Redial last call:

1. If your phone has the Last Call Redial feature, you can use it with the headset.

2. The function is activated by double pressing the Talk key.

Volume control:

1. To increase the volume, press the Volume + key.

2. To decrease the volume, press the "Volume -" key.

The microheadphone manufacturer is NANO phones.

Representative of NANO phones in Nizhny Novgorod.

If your device cannot be configured to work with the headset in the standard way, please contact Plantronics technical support.

Professional solutions for the modern contact center

At Plantronics, we understand that high quality customer service is your number one concern. Professional communications solutions can help transform customer service employees into real superheroes. Modern contact centers have gone from simple call centers to customer service centers where relationships are built according to strict rules and the company's reputation is tested with every call.

Unified Communications - unified communications for modern business

The concept of Unified Communications allows you to establish communication with a single click. This makes voice and video communication much easier, so you only have to worry about what to say, not what device to use. Interoperability with Plantronics' UC (Unified Communications) solutions ensures clear speech, noise-free conversations and connectivity to any device.

Sound masking systems for an efficient working environment

Sound masking systems are a new step towards creating an efficient and comfortable working environment. Today, the most common type of office is "Open-office", when there are no partitions in the office, and employees can move freely and communicate with each other. This has a positive effect on the atmosphere in the team and the exchange of information, and at the same time creates additional distractions, the main of which is the speech of colleagues. It is very difficult to concentrate on work when you are surrounded by all sorts of conversations, and which have to be distracted unwillingly. The solution to this problem is the use of sound masking systems from Cambridge Sound Management.

Wireless earbuds are no longer a novelty for a modern person. This technology has a very high demand in the market of multimedia devices because of its versatility and compactness: no wires, no plugs. But often there are situations when an ordinary user has difficulty connecting them. Let's look at this issue in more detail.

Wireless headphones for phone

To exchange sound information between wireless headphones and a phone, smartphone or tablet, Bluetooth technology is used, the module of which is endowed with almost all modern devices.

First you need to activate Bluetooth on your phone or tablet. Make sure that the visibility of the module is active for all nearby devices, otherwise you will not be able to successfully connect the headphones to your mobile device. Next, you need to turn on Bluetooth on the headphones themselves. How to do it? It all depends on the manufacturer. In some cases, you need to press and hold the corresponding key for ten seconds. More detailed information on this issue can be clarified either from the seller or in the documentation. How to determine that the headphones are ready to sync with the phone? This can be signaled by a built-in LED or a specific sound signal.

The next step is to scan the phone for devices that can be connected. If your mobile device has detected a new multimedia device, this indicates that you have correctly activated the wireless headphone module. Confirm the connection and enter the password. Note that passwords may vary. It depends directly on the manufacturer and the features of a particular model of headphones. The default password is 0000.

Your mobile phone in automatic mode will fix both the new connection and the password to it. This means that the next time you connect your headphones, your smartphone will instantly synchronize with them.

Can I use a Bluetooth headset to listen to music? The answer is simple: you can. Turn on the power on the headset, connect to your phone (just like with wireless headphones) and enjoy your favorite songs.

Wireless headphones do not have the ability to work with multiple devices at the same time (for example, a tablet and a computer).

Wireless headphones to PC

As we have previously found out, wireless headphones work by connecting via Bluetooth. Therefore, to connect them to personal computer, it must contain the appropriate module that allows you to synchronize between devices. You can buy it at any store that specializes in computer technology. As a rule, this module is connected to a PC via a USB port. For it to work correctly, you will also need to install all the necessary drivers.

We will assume that you have successfully completed the previous stage. Now you need to do the following on your computer: open the "Start" menu, go to the "Devices and Printers" tab and in the window that opens, click on the "Add device" button. Windows will automatically search for active devices (Bluetooth must be enabled on both the PC and the headphones). Next, you will need to enter a password. But that's not all. You also need to configure and sound card– select the connected device as the main equipment for audio playback.

Wireless headphones are also good for watching movies on your home theater or your favorite football on TV. The four best wireless headphones are presented in the following article:.

Connecting branded Beats headphones

Many people know that headphones from dr. Dre are very popular among professional musicians, DJs, as well as connoisseurs of high-quality and surround sound. Most headphone models from this company have a very significant feature: they can connect to other devices both via an audio cable and via Bluetooth. Below we will consider connection sequence of these headphones wirelessly:

The initial step is to turn on the power (the audio cord must be disconnected).
A special indicator is installed on the left bowl, which will flash when the Bluetooth module is successfully activated.
Next, you need to connect to the headphones from your phone, tablet or laptop (according to the instructions that were described above).
If the LED blinks 4 times, and then starts to glow continuously, this is a signal of successful synchronization between devices.

It is worth noting that the manual activation of the module is carried out as follows: the “b” button is held for 2 seconds.

Wireless technologies in metal detectors

Wireless headphones for a metal detector are a very versatile, useful and affordable solution for everyone. What will be required for this? The presence on your metal detector of an input connector for ordinary headphones, an FM transmitter or an external Bluetooth module and, directly, the headphones themselves.

This video describes in more detail one of the ways to connect headphones to a metal detector via a Bluetooth transmitter.

The procedure for connecting wireless headphones to any other devices via the Bluetooth module is quite simple and mundane. If you encounter any difficulties during this operation, it is recommended that you familiarize yourself with the documentation for your headphones in more detail, and also check that the modules are activated correctly on both devices.

In contact with

To listen to music through a headset on your PC without worrying about extra wires, you need to know how to connect Bluetooth headphones to your computer.

The instruction below is universal way connection that does not depend on the headset model or PC type ( or ).

After connecting the external adapter to the computer, everything will be downloaded from the official website of the manufacturer (Internet connection is required) or, and an active Bluetooth tab will appear in the task manager.

Rice. 4 - an example of using an external Bluetooth adapter

So, the module is working in normal mode, which allows you to proceed to further connection settings. Follow instructions:

Go to the additional tab (arrow "hidden icons"). By default, this is where the adapter's basic management icon is located. Click on the bluetooth icon and in the context menu that appears, select the option to add a new device.

Rice. 5 - adding a new bluetooth device

Now take your headphones. Press and hold the power key until the colored power indicator lights up. Thus, you activate the gadget and it can be connected to a computer.

It should be noted that in bluetooth headphones, a color indication system is used to determine the status of the device. Depending on the gadget model and its settings, a certain color may show a different state. However, most manufacturers use red and blue diodes. They indicate the active operation of the device.

In the Bluetooth device management window on your computer, wait until the name of your headphones appears. This means that the computer has successfully identified the device. However, it is not connected yet;
Now you should click on the headphone icon. The system will ask you to enter a passcode to confirm the connection. Type four zeros in the text box. This code is suitable for absolutely all wireless headsets;
Wait until the connection is completed. As a result of a successful connection, an inscription will appear next to the headset icon in the PC window: “Paired”.

Rice. 6 - setting up the pairing of the gadget and the computer

Step 2 - Connecting Headphones and Testing Operation

In addition to successfully establishing a connection, some headphone models require additional configuration.

If you cannot hear sound immediately after pairing your devices, or if you experience intermittent failures, your system may not be set to audio playback mode.

Because of this, malfunctions occur.

Go to and open the sound playback manager window.

In the tab "Playback" select the priority device that will be responsible for playback.

In our case, you should click on "Headphones". Confirm the action and exit the settings window.

Now connect your Bluetooth headphones again. Henceforth, during the playback of audio tracks there will be no failures and stutters.

Rice. 7 - configuring the device to play sound in Windows

Connecting a wire free headset to Skype

If you connect bluetooth headphones to work with the program, note that you need to make additional settings for the headset:

Turn on the application and open the "Tools" tab;
Click on the tab "Sound Settings";
A set of parameters for operation will appear in the right part of the window. In the "Microphone" field, select the bluetooth device connected to the computer. For speakers, also select a headset - it will be used not only for playback, but also for reading sound signals (like a microphone).

Rice. 8 - setting up reading and playing audio in Skype

Possible connection problems

If there is no sound in the headphones, check that the desired volume level is set in the mixer.

There is a separate field for headphones, do not confuse it with the speaker volume slider.

Rice. 9 - Adjusting the headset volume

If you have made the connection following all the above tips and instructions, but the sound is not reproduced, you should update the drivers of the connected device and the built-in adapter.

To do this, go to the device manager and right-click on the tab with bluetooth devices. Select from the dropdown list "Update Configuration".

Rice. 10 - update adapter drivers

This action will be performed automatically if there is an active Internet connection.

On the manufacturer's website and install it. The procedure will take less than one minute.

Rice. eleven - automatic search and driver installation

If you are using an external Bluetooth adapter, you need to update the drivers for the USB Controllers tab in the same way as for the tab with the built-in communication device:

How to connect bluetooth headphones

How to connect bluetooth headphones to a computer. IF you already have a built-in bluetooth in your computer, then an adapter is not needed!

Some users of older phones have difficulty installing the headset. The interface of these devices is far from perfect, but they are reliable, inexpensive and therefore still popular. In this article, you will learn how to set up a bluetooth headset to work with some popular phone brands.

How to set up a headset: instructions

First of all, make sure that both the phone and the headset are turned on. After that, put the headset into device search mode.

On the M2500 headset model from Platronics, this is done by setting the multifunction wheel to the up position and pressing the call button. If you have an M3000 or M3500 headset, then you also need to move the wheel up, then press the answer button and lower the volume control knob. Until the green and red LEDs of the headset flash, do not change anything in its settings.

Phone setup

After setting the headset to search mode, you need to set up your phone. To do this, select "Search for Bluetooth headsets" in its menu. When the phone and the headset detect each other, you need to specify the headset model in the mobile phone menu. In this example, this would be "M2500 by Plantronics" or "M3000/3500 by Plantronics". The setup procedure for some specific phone models is described below.

When the phone asks for a password, dial "0000". The headset is now set up and paired with your phone. If after several attempts to set up the headset, you are unable to connect it to the phone, you need to contact Plantronics support. Now let's touch on how to set up a bluetooth headset on individual phones.

Siemens S55

Press the key located under the word Menu, which is present on the screen. Then move the cursor to "Setup" and press the "Select" button. Switching with the "down" and "up" buttons of the joystick, select the "Connectivity" item, open the "Bluetooth" sub-item in it, select "Options" and then "Activate".

Next, in the "Options" menu, select "Search for" and click "Access". The Bluetooth devices will appear on the screen. Choose from them M2500 (3000/3500) Plantronics and press "Select". The phone will now ask you for your password. You need to enter, as already mentioned, "0000" and click Ok.

Nokia 6310

Go to the phone menu and select Bluetooth there. Select the "On" position and press "Select". The phone will then see your headset if it is in search mode. Select it (M2500(3000/3500) Plantronics) and press "Select". You will then be asked to enter a password (“0000”).

Ericsson T39

With the phone turned on, visit the "Extras" menu and click "Yes". Now look for the "Bluetooth" section, select the "Operation Mode" item in it and set it to the "On" position.

To search for nearby Bluetooth headsets, go to "Paired Devices". Select the option "Add Device" -" Phone Initiates" -> "Headset" in it. Then select your headset in the list of devices that appear, enter the password "0000" and click "Yes".

How to connect a garnish to a computer

Before you set up the headset on your computer, you need to connect the Bluetooth adapter to the USB port and install the driver for it. Now put your headset into search mode, just like you did when you connected it to your phone, and follow these steps.

On the Bluetooth tray icon, right-click and select "Bluetooth Setup Wizard" from the context menu.
From the new list that appears, select "I want to find a specific Bluetooth device..." and click "Next".
The computer starts searching for nearby Bluetooth devices. It is important that the headset remains in search mode at this point. If suddenly she left this mode, start it again, and on the computer, click "Search Again".
When the headset is found and its name appears on the computer monitor, double-click on it.
A window will appear asking you to enter your PIN. Enter "0000" and press the "Initiate Paring" button.
The available services for the headset should now appear on the screen. Opposite each of them, check the box and click the "Finish" button.
Now, as soon as you press the answer button on the headset, it will connect to the computer as an audio device. Another way to connect it is by right-clicking on the Bluetooth tray icon and selecting the submenu "Quick connect" - "Head Set" - "Headset". With the same actions, the headset is disconnected from the computer.

The headset is connected to the computer. Now, in order to communicate through it in Skype or listen to music through it, you need to set this device as the default in Skype or Windows, respectively.

Instructions forBluetoothheadset

Charger:

The headset has a built-in ; charge the battery to a full charge before use.

1. If your phone has the Last Call Redial feature, you can use it with the headset.

2. The function is activated by double pressing the Talk key.

Volume control:

1. To increase the volume, press the Volume + key.

2. To decrease the volume, press the "Volume -" key.

The microheadphone manufacturer is NANO phones.

Representative of NANO phones in Nizhny Novgorod.

How to use bluetooth headset? Despite the fact that such devices have been in wide demand for a long time, the number of users is still growing every day. This is not strange, because wireless HandsFree is very convenient, even for listening to music at home.

But, before moving on to the question of how to use a Bluetooth headset, you should understand what it is all about? After all, this is the basis that will allow you to better understand the principle of operation of such equipment.

What is a wireless headset

It is worth noting that there are a huge variety of different types, types and options for such accessories:

Stereo or mono.
Supporting different standards (2.1, 3.0, 4.0 and so on).
With additional features, for example, the ability to connect to two phones at once.
Vacuum, liners and overhead, and much more.

To answer the question of how to properly wear a Bluetooth headset, you should start from what type it is. For example, on-ear headphones are worn on the head and fixed with a bow. If we are talking about vacuum, then they are inserted into the ear canal, as well as ordinary earplugs.

The main rule is that you should be comfortable in them. In addition, you should hear the interlocutor well when talking.

How to connect a headset to a phone or tablet

There is nothing terrible and complicated here. As a rule, instructions are included with the headphones. But in any case, everything happens according to the same principle. Turn on the Bluetooth adapter on your smartphone. Now on the headset, find the power button and press it. Hold the button until the indicator flashes blue and red (color may vary depending on the model).

If you do not have an indicator light, then just hold the power button for about 15-20 seconds. In this way, you will turn on the discovery feature so that the phone can find and connect to the equipment. Now go to your Bluetooth settings on your smartphone.

Here you will see a list. Select a headset and click Connect.

How to connect Bluetooth headphones to a computer: Video

Charging the headphone battery

Since Bluetooth headphones require additional power to operate the adapter, as well as to play sound, it is logical to assume that there is a battery inside. Hence another question, how to charge a Bluetooth headset?

Immediately it should be noted that not every model has the ability to charge. In other words, some headphones run on conventional batteries that cannot be recharged. In this case, the interface for connecting charging is simply not provided, and at certain times you need to change the power source.

In addition, there are also such options, complete with which the docking station is attached. She is also a charger.

However, these options are more expensive. In the bulk, however, Hands Free has a standard interface for connecting charging. It can be of different types. Since the vast majority of smartphones and tablets nowadays use a micro USB connector, it is recommended to choose a headset with the same interface. This will allow you to charge all devices with one power supply.

Listening to music on a wireless headset

Often users ask the question whether it is possible to listen to music through a Bluetooth headset. There really is no single answer. The fact is that some models support the Headset and A2DP functions. These features allow you to listen to music through a wireless headset, but are typically only available on stereo headphones.

If you are using a budget option with one speaker, then in this case, you will not be able to listen to music in the usual way. But, do not rush to get upset. You can download and install the "Mono Bluetooth Router" program. The application allows you to use any type of Hands Free to listen to music. This is the answer to the question how

Make sure that the phone to which you plan to connect the wireless headset is equipped with Bluetooth data technology. If your phone does not have this technology, you will not be able to connect a wireless headset to it. You can check the presence of Bluetooth in the phone by reading its instructions, or by looking in the phone menu.

Turn on the wireless headset. It is necessary to press the multifunction button on it and hold it until the operating mode indicator turns on. Then turn on the phone with which you want to connect the headset and turn on Bluetooth. In the Bluetooth menu, you need to run the search for compatible devices command. The scanning process, depending on the speed of Bluetooth on the phone and headset, can take from several seconds to a minute.

When the scan is completed, a list of compatible hardware will become available. From it you need to select a wireless headset. You may need to enter a passcode to transfer data via Bluetooth. In this case, you need to enter the code indicated in the instructions that tell you how to set up a wireless headset. This is usually 0000. After entering the code, a connection to the wireless headset will be established. The introduction of the code is required only for the first time, in the future it will not be required.

When the phone is successfully connected to the headset, the indicator on the headset will flash. Now you need to go to the Bluetooth menu, then to the list of paired devices and select a wireless headset. So, the headset is connected and ready to go. Such manipulations need to be done only once. In the future, you just need to go to the Bluetooth menu, then to the list of paired devices and select a headset.

If you don't know how to set up a headset to connect to your computer for Skype, try the following steps. First, you need to switch the headset to discovery mode. Secondly, run a program on your computer to search for Bluetooth devices. If there is a label "Bluetooth environment", you need to click on it, and if not, right-click on the Bluetooth icon and select "open Bluetooth environment" or "Add device".

Next, you need to carry out the process of pairing Bluetooth devices. The last step is to launch and work with the wireless headset. To do this, open the application settings: Tools, then Options, and then Sound Devices. In the Audio Out and Audio In fields, select Bluetooth Audio. In order to start chatting, you need to activate the connection between the headset and the computer. To do this, open the "Bluetooth environment" and double-click on the headset icon.

Some users of older phones have difficulty installing the headset. The interface of these devices is far from perfect, but they are reliable, inexpensive and therefore still popular....