How to set up a universal remote control for a TV from a smartphone? . How to set up a GAL universal remote control for a Samsung TV How to use a universal remote control for a Samsung TV

This article provides detailed instructions on how to set up a universal remote control for all TVs. One such device can easily replace all other remote control devices in the house. The UPDU can give commands to various equipment thanks to a special chip that can generate several pulses at once.

Experts recommend purchasing control units with LCD or touch screens, as they are more convenient and reliable. Today, the range of remote control equipment on the market is large; remote controls can vary in configuration, cost, design, and most importantly, have different codes for control.

Codes for universal remote controls can be viewed on the Internet; many resources provide the entire list.

Below are options on how to set up a universal remote control to control the most popular brands of TV.

The universal remote control of the Supra brand is configured using two options.

Manual setting

Find and download on the Internet a suitable code that will correspond to the user’s television panel.
Connect the screen to the network.
Point the Supra remote control at the TV.
Press the “Power” key and simultaneously enter the desired code.
The “Power” key must be kept pressed until the light on the remote control blinks twice.
The basic setup of the universal remote control is completed.
Then you need to check all the buttons of the device. If the device does not work, try downloading another code.

Automated

Instructions on how to configure the Supra remote control using automatic configuration:

Turn on the equipment.
Point the remote device at the screen.
Press the “Power” key and hold for a few seconds; the indicator on the remote control should light up.
If the setup operation was successful, a volume label will appear on the monitor.
Check how the configured device functions.

UPDU Supra is ready for work.

Brand HUAYU

You need to configure the Huayu remote control according to the following scheme:

Press the “SET” and “POWER” buttons on the huayu remote control simultaneously, after which the device will enter programming mode. During the programming process, the LED on the Huayu remote control is constantly lit.
Using the VOL key you need to specify the required command.
To exit the mode, press SET again.

Remote devices from this manufacturer are best suited for LSD and LED panels; you should also know that there is a configuration diagram on the back of the device.

Thus, you can also configure remote controls for TVs from the manufacturer Unimak.

Old versions of the Beeline PU had many difficulties during setup; they could only be connected using a set-top box; it did not have a remote control and a Setup key. But the Beeline company has improved the technology, so new versions already have a Setup button, and now it has become quite easy to configure the equipment. By design, this is not a very large remote control with many buttons.

Instructions on how to connect the Beeline remote control to Cisco.

Turn on TV.
Press the Setup and C buttons simultaneously on the Beeline control panel.
After which you need to wait for a while, the Stp key will initialize.
After the diode blinks twice, the buttons are released.
The operation of the device is checked using the VOL key.

If binding occurs to other set-top boxes, then the circuit is slightly disabled, namely step number 2.

on the Motorola set-top box you need to hold the SETUP and B keys;
and if the binding is to the Tatung prefix, then the command is executed using the SETUP and A buttons.

This is basic information on how to set up universal remotes of different brands for your TV.

Conclusion

If the device does not work after the performed steps, it is recommended to look at the codes again and carefully study the instructions. The user manual provides a complete description of what a universal TV remote control is, how to set it up correctly, and is also described in detail.

If repeated connection attempts are unsuccessful, it is recommended to contact a service center for help, as the device may be defective. If this is confirmed, then you need to return the low-quality equipment to the seller. Read also, and.

To control TV equipment from a distance, equipment manufacturers try to equip the device with a remote control. In some cases, you have to buy a universal TV remote control to perform such actions. What this device is and the differences from the original version is discussed further in the article.

In order for the Smart TV to receive high-quality images, you must use the digital television function. In most cases, a special receiver attachment is used to connect such equipment. In this case, the user has two devices for remote control at once.

Not many people like having an additional remote control, and therefore users try to get rid of the unnecessary old one so that it does not clutter up the space inside the room. For this purpose, you need to purchase a special universal remote control, which will replace two remote controls at once - to control the TV and the set-top box.

Despite the development of modern technologies, PU remains unchanged over the years. It may differ slightly in shape, but the design remains the same - electronic circuit, the presence of a large number of buttons and a plastic body with LEDs. Also, the equipment must include a power source - batteries.

The universal remote control has the same functionality as the standard version, but it will have to be configured in such a way that unnecessary remote controls remain unused.

Many users are interested in the question: “can any remote control become universal for all TVs?” The answer is simple - no, not any. Externally, the remote control units will be very similar, but the filling is slightly different for the universal sample.
Having purchased a universal remote control, you need to look for codes for the desired TV models and configure the remote control to manipulate several devices.

Top 3 best universal remotes

REXANT 38-0011.
Vivanco UR 2.
One For All URC 6810 TV Zapper

The difference between the original and universal remote control

If a set-top box is used in the house, for example, Tricolor TV or Dom RU, then the remote control for these equipment itself is useless without a corresponding pair - from the TV.

The operating principle of any remote control consists of three main actions:

When the user presses a certain key, the desired microcircuit is activated, and the electrical impulse is transmitted to the TV.
The signal is transmitted thanks to an LED, which receives a certain command and sends an impulse to the TV with which it is paired.
Every TV has a phototransistor. It receives an infrared signal from the control unit and converts it into an electrical impulse, which is sent to the control unit. As a result, the TV responds to the perfect command.

To control the TV from the remote control, a special communication method is used, which is called PCM. This principle is also called a pulse walking modulator.

The peculiarity of the equipment is that for each command from the remote control a three-digit code is assigned, for example:

000 – deactivate the TV;
001 – switch to the next channel;
010 – return to the previous channel;
011 – turn up the volume. 100 – reduce volume;
111 – activate TV equipment.

From this we can conclude that when you press the remote control key, the installed electronic circuit inside the control unit activates an infrared diode, which will work according to a certain pattern: "111" - ON, ON, ON.

The signal length will be interrupted in standard steps of a few milliseconds. When adjusting the volume, the code “011” is used. This means that the diode will perform three such actions at once, but with a certain delay: it will deactivate, turn off, and then turn on again.

You can find several types of remote controls in stores:

original;
universal;
unoriginal.

Non-original and original control units are designed to control certain TV models. The difference between them is that the original version goes on sale along with a specific TV, and a non-original version is bought to replace a damaged or lost model.

A universal control panel, it can be programmed according to the instructions for a specific TV, it is suitable for different options. It is recommended to connect the equipment to the TV if the original control panel is lost or broken.

UPDUs vary in shape, color, size and design. The user will have the opportunity to choose depending on his preferences. A special program is built inside the equipment, consisting of several codes that match the signal of each TV device. To configure it correctly, you will need to know this code in advance.

How to set up a universal remote control

To activate the universal control unit, you need to power it by inserting the correct type of battery into the appropriate connector. Some remote controls do not come with batteries, and you will have to purchase them.
Helpful advice: It is advisable to purchase non-AAA batteries, rechargeable batteries that can be charged many times. This will save a lot of money. Together with the nutrient cell, they sell a special slot where they can be installed for recharging. To carry out the operation, you will need to connect the device to the electrical network at home.

As soon as the universal remote control is powered up, you can proceed to pairing with your Smart TV. On the remote control, you need to select the appropriate mode: TV, DVD or Audio(some models have other parameters).

You can watch the remote control settings in the video below, but for each specific case we will look at the settings manually and automatically.

To connect to a TV device you need to use the “TV” button. To activate, you need to hold down the key for about 3 seconds and wait until the indicator on the front control panel lights up.

Next, you should enter a specific code from the model of your TV equipment. To find out this parameter, you will need to study the operating instructions.
There are several ways to set up a universal remote control for your TV - manual and automatic.

Manually

As mentioned above, for each TV unit there is a specific pairing code, which is necessary for fine-tuning the universal control unit.

After its introduction, you need to perform a certain procedure.

Setting up a universal remote control for your TV:

For the Supra remote control, point the remote control directly at the TV and hold down the Power button, after which a window will appear where you will need to enter the code from the device. If the numbers are entered correctly, the LED will blink several times. At this point, you can release the Power key.
For the Huayu universal remote control, you need to hold down the Set and Power buttons at the same time. You must wait until the LED starts flashing. Next you will need to enter a 4-digit code. After the diode goes out, you must press the Set button.
For the universal Beeline PU, you should activate the “TV” button and simultaneously press Setup and C.

After installation is complete, the device will blink several times. This is a sign that the keys can be released. To check the functionality of the equipment, you need to increase the volume of the TV. It is important to note that if you do not enter the code within a certain time (60 seconds), then all settings will have to be done again.

Automatically

To configure the remote control in automatic mode, you need to press a combination of four nines on the remote control button panel without removing your finger from the “9” key. If everything is done correctly, the TV will be deactivated.

After this, automatic selection of channels will begin. The operation may take approximately 15 minutes. This option is used if the user does not have a code to configure the universal remote control.

How to set up a universal TV remote:

For the Supra remote control, you need to turn on the TV, point the remote control directly at it, and hold down the Power button for 6 seconds. The LED should light up. If the TV device responds to a decrease or increase in sound, then the setup in automatic mode was successful.
On the Huayu control panel, you need to hold down the Set button and immediately after it Power. It is important to do the operation correctly - the keys are not activated simultaneously, but with a short interval. After this, you can release the digs. Press Power again. Make sure that the volume level appears on the TV device screen. To exit the program, you will need to click the Set key several times.
There is a third setting option that can be used for universal remote controls. The television receiver, as in previous cases, should be turned on. Next, press the “TV” button and hold it until the LED starts to light (on some models it may start blinking). Hold down the Mute button to start searching. At the end of the process, you need to activate any key of the universal control panel and make sure that the TV unit responds to commands.

Universal remote control codes

To set up a universal control unit, you need to know a specific number from a specific brand of TV device. Codes for universal TV remote controls are written in the device data sheet. Information is also available on the manufacturer's official website. There is a table of codes with the correct meanings.

It doesn’t matter what kind of TV the remote control is from (Samsung, Philips, Toshiba, Panasonic or other popular brands), you won’t be able to set up the equipment without the appropriate code. Therefore, before purchasing, it is advisable to find out all the available information about the TV and the control unit.
Using a universal remote control is easy - point at the TV and press the desired key. Everything is the same as with a standard remote control.

If you lose your TV remote, you don’t have to worry about it. There are always universal remote controls on sale that, after a fairly simple procedure, can easily replace the original model. The process of connecting to the TV will take no more than 10-15 seconds. It is only important to know how to set up a universal remote control.

Device structure

The design of the universal remote control is no different from the original models. Both types of devices have buttons for selecting channels, adjusting sound, setting a timer, and others.

Typically, both devices run on the same AA or AAA batteries. If you use one remote control for a large number of devices, then the batteries will have to be changed more often than in a conventional model.

Some features of the internal device may determine which devices can be controlled and how to configure the universal remote control. Gal LM p001, for example, has the ability to quickly connect to TV and SAT. Some other models do not have this feature.

Comparison of the original remote control with the universal one

There is no external difference between the two types of control devices. They differ only in the set of functions.

The first and main difference is that universal remote controls can be connected to a large number of devices and devices. They can be used simultaneously. For example, using one universal remote control you can turn on a TV, air conditioner, stereo system and any other electrical unit that allows remote control. The remote control will also allow you to control home theater functions, satellite dish and cable TV.

In addition, the cost of a universal remote control is lower than the original model, and the service life is usually longer.

For owners of older TV models, such a universal device will be a lifesaver if the original controller is lost. Original remote controls for previous years' models are simply not produced.

Are they really universal?

Any remote control can be used with different models of TVs, players and air conditioners. Of course, there are exceptions. For example, what should you do if you can’t set up a universal remote control? How can I check if it fits a given device model? First, you need to look at the list of compatible models in the instructions for the remote control itself. If there are no instructions regarding this, and the connection cannot be established, the problem may be in both the remote control and the TV.

The versatility of remote controls is determined by the fact that, unlike original devices, which can be configured to work with only one device, they can simultaneously work with different devices from different manufacturers. At the same time, they do not have to be reconfigured every time.

How to set up a universal remote control

To establish a connection between your TV or other device and the universal remote control, you need to follow these steps:

Turn on the remote control and point it towards the device.
Simultaneously press the OK or SET button (depending on the remote control model) and hold for 3-5 seconds.
Enter the code corresponding to your device model.
Then press the TV button to make sure it is connected.

If for some reason the remote control does not connect to the TV, you need to do these steps again. The device code may have been entered incorrectly.

There is another way to configure the Huayu universal remote control. To connect such a device, you can use auto search:

Turn on the device you want to configure.
Press the SET button and then POWER.
Release the buttons simultaneously.
Press the POWER button again and release.
Check if the sound volume indication appears on the screen.
Press the SET button twice in a row.

Not all universal remote control models support the automatic search function. It is also possible that the auto search function is not supported by the TV model itself. Therefore, for some cases, there is only one way to configure the LM P001 universal remote control - manually.

Some brands have a quick search function. To connect in this way, you need to perform the following algorithm:

Turn on the device you want to connect to.
Press and hold the TV button for a while.
Release the button when the power indicator lights up.
Press and hold the MUTE button.
When the connection occurs, release the button.
It's easy to check the operation of the remote control - just change the channel or adjust the sound.

If none of the methods worked and the code specified in the instructions did not work, you can use the last method - sequentially searching through the code manually.

How to determine the TV code

Each device model has its own universal code, which allows you to connect a remote control to it. It comes in three, four and five characters.

For example, to find out how to set up a universal remote control for Samsung, you need to look at the code information in the instructions for your TV or air conditioner.

It is important to remember that you need to enter the code of the device being connected, and not the universal remote control.

Smartphones with universal remote control function

Some newer brands of phones allow you to use them as a universal remote control. As a rule, they can only be connected to TVs with the SMART TV function.

To set up a universal remote control on your smartphone, you will need to download a special application and follow the installation instructions that will light up on the screen. Using the program, you can interact not only with the TV, but also with other devices that allow remote control functions.

This useful feature is available for a limited number of smartphone and TV models. To use your phone as a remote control, both devices must have a Wi-Fi module, an infrared port, or Bluetooth connectivity.

The times when you could only switch the TV manually are long gone: today all TVs have a remote control, and sometimes more than one.

Unfortunately, the remote control is a rather fragile thing: it can break or get lost, and buying a new one can be a serious problem.

To prevent this from happening, universal remote controls have been developed that can make the life of the equipment owner much easier.

How do they work

Many people have probably noticed that a TV can only be controlled with its “native” remote control: for example, the remote control for LG equipment will not work for Philips or Toshiba.

The work of the universal remote control is to intercept the signal, recognize it and further use it.

The advantages of such remote controls include ease of use and the ability to easily replace the main one. In addition, universal remote controls are usually inexpensive and can be easily purchased in all stores.

In this case, the remote control can be reprogrammed when changing the TV itself or use it as a remote control for an air conditioner or other equipment. The cost of such remote controls is usually low: for example, “Supra” remote controls cost less than 500 rubles.

It is worth noting: universal remote controls may not be suitable for all equipment: it is worth checking with the seller in advance about the “compatibility” of devices.

It is also important to remember that when replacing batteries, most will need to reset. Another unpleasant feature may be a mismatch between the buttons and the action being performed: this can happen if the remote control is poorly compatible with the device or is not configured correctly.

According to the settings options, the remote controls can be:

trained: all programs are already “packed” inside, the owner only needs to select a program;

programmable: manual adjustment required.

Based on control capabilities, they are divided into:

TV remotes;

remote controls for all household appliances: thanks to them, you can control all appliances with one remote control - air conditioner, VCR, etc.

In appearance they can be:

traditional, for example, remote controls “Rexant rx 7 7e”, “139f”, “Gal Imp 1”, “Hama”;

in the form of a keychain, for example, “Mustery”, “Huayu”.

It is important to know: remote controls in the form of key fobs usually have little functionality: they can turn the device on and off, adjust the volume and switch channels, and also call up the settings menu.

Among the most popular manufacturers are “Sony”, “Inc”, “Philips”, “Sharp”, “Rolsen”, “Benq”, “Hyundai”.

Setting up the remote control

If the choice falls on a trained remote control, the owner will need to program it in several steps:

find the code for your TV in advance in the instructions or on the Internet;

press the “SET (TV)” button and wait for the diode to light up;

press “POVER" and enter the desired code; if the diode does not go out, you need to press "MULT".

When connecting a programmable remote control you must:

press the “SET (TV)” button;

hold down the “POVER” button and point the remote control at the TV that is on;

the remote control will begin to read the signal and select the built-in code independently, at this time the diode will blink;

As soon as the TV “responds” to the remote control (changes the channel, turns off the sound), you must press “MUTE".

The reaction of the equipment can be anything: it depends on the model of the TV and the remote control. When choosing a remote control, you need to check its compatibility with the equipment and, if possible, purchase a device from the same company as the TV.

A universal remote control can be extremely useful in many situations: when you lose the main remote control or the ease of control. Most often it is used as a replacement, but a universal remote control can become a full-fledged replacement.

Watch the video in which an experienced user explains how to set up a universal remote control for TVs:

Dear readers! Our articles talk about typical ways to resolve legal issues, but each case is unique.
If you want to know how to solve exactly your problem - contact the online consultant form on the right or call:

Recently I encountered a banal problem - the remote control of a Samsung LE-32S81B LCD TV died. More precisely, he didn’t die, some buttons just stopped working, as luck would have it, the most used ones are channel switching and volume. Disassembling the remote control and wiping its insides with alcohol gave some effect, but it was temporary - after 3 days, you had to press the button as hard as you could to change channels. Tired of it!

Puzzled by the purchase of a new remote control, I conducted a raid on online stores and realized that I couldn’t buy an original remote control for less than 800 rubles. I went to the M-Video store, they offered me a non-original remote control for 900 rubles, for which they were sent along the fence to read the inscriptions, and during a visit to Auchan they purchased a “good cheap” GAL LM-P003 remote control for 350 rubles and 2 AAA batteries for him.

The most interesting thing was ahead - setting up the GAL remote control to work correctly with a Samsung TV.

The remote control came with detailed instructions on how to do this; it contains several methods - manual, automatic and semi-automatic. A separate piece of paper contains a list of codes for different types of equipment - a piece of paper almost the size of a TV, and filled on both sides - at least 1000 codes! Fortunately, there is a grouping of codes by device type (TV, Audio, Video, DVD, etc.) and by manufacturer.

Automatic method is that the remote control goes through all the codes from this table and gives a command to turn off (by default the TV should be turned on). If the TV turns off, then the code has been selected and you need to press the OK button within 2 seconds. I first launched this method of selecting a code, but quickly realized that I could sit from morning until evening while it sorted through all the codes. Moreover, you cannot leave the TV in time to press the OK button. I don’t know who to recommend this method to - except maybe housewives or retirees who have a lot of free time :)

Manual method faster and more practical. In the section with codes we look for the type of equipment and its manufacturer, in my case - TV / Samsung. There will be about 40 four-digit codes in this section. We proceed as follows, here are step-by-step instructions:

1. Press the TV button on the remote control and hold it for 3 seconds, the indicator on the remote control lights up.

2. After this, enter the code using numbers, for example, 0064. The indicator goes out, the code is accepted.

3. To check, press the channel switch button. If the TV does not react at all, go back to step 1 and enter the following code. And so on until the TV responds to commands from the remote control.

I was able to enter a working code after about the 20th attempt, the remote control controlled the TV, but incorrectly - the channels were switched, the volume was adjusted, but the setup menu did not work - instead of going through the items (with the joystick), the channels were switched. I continued my search and found at least 5 more working combinations. The optimal code for the Samsung LE-32S81B TV was 0565. All functions work - menu and teletext (although I don’t use it) and other rarely used settings.

Let's summarize. The GAL-P003 remote control turned out to be a fully functional and inexpensive replacement for the original remote control. I had to tinker with reading the instructions and setting up the remote control for about 15 minutes. The remote control range is at least 5 meters (on fresh batteries).

In terms of tactile sensations, the GAL-P003 remote control is, of course, not ideal - it feels cheap in everything. The body is made of inexpensive and lightweight plastic, painted silver. There are small nicks along the junction of the top and bottom panels. The volume and channel switching buttons do not have the most convenient shape; they are pressed tightly, and a click is felt at the end of the button. The remaining buttons have a convex shape and are easier to press. The labels on the main buttons are easy to read, but I think they will wear off over time with heavy use. If you value expensive and high-quality things and accessories, this remote control is not for you. But if you just want a remote that works, the GAL-P003 is a perfectly practical choice.