What to do first if your Apple Watch does not turn on and does not respond to presses. Methods to reboot Apple Watch: easy way and hard reboot Apple watch frozen

If you have Apple Watch won't turn on, first of all, try to figure out the reason yourself. In our publication, we will give recommendations on what to do when your Apple watch does not turn on. Thanks to them, you will be able to understand the causes of the problem without consulting specialists at the service center.

By the way, if you have the same problem with your iPhone or it might happen, we recommend a useful publication - what to do if this article has already helped many, perhaps it will help you too!

Why Apple Watch won't turn on - reasons

Apple Watch won't turn on

The main reasons why the Apple Watch may not turn on are:

  1. The smart watch froze after the update.
  2. Apple Watch won't turn on due to a software glitch.
  3. The seal was broken and moisture got into the Apple Watch.
  4. The power button is broken.
  5. The clock does not turn on due to mechanical damage.

Apple watch does not turn on or is frozen - what to do?

The surest way to freeze any device, including Apple watches, is to force a reboot!

How to reset Apple Watch:

  1. Press and hold the Side button and Digital Crown.
  2. Hold the buttons until the “apple”  starts to light up on the screen and do not press for 15-20 seconds.


After the watch restart is complete, WatchOS will make changes and optimize the operating system version by updating it to the latest version. The reboot process will take 3-5 minutes. If these manipulations with a forced reboot have no effect, then the problem is different, we recommend moving on to the following tips.

Apple Watch won't turn on, what to do - put it on charge!

The most likely reason why the Apple Watch does not turn on is the discharge or failure of the battery in the device. You need to charge or replace the battery in your Apple Watch.

Before you suspect your Apple watch is malfunctioning, check the functionality of the charger and adapter, and also see if the cable is tightly inserted into the adapter - there may be no contact with the contact elements and this is precisely the reason. That's the reason: The Apple watch does not turn on because it is discharged, and the charger is either not in working condition or is simply not connected to the network properly.


 Why Apple Watch won't turn on

Cleaning your Apple Watch

Another reason why a smart device may not turn on is that the contacts are clogged, causing the charger to not connect to the device. To clean, you need to take a soft cloth (microfiber) and carefully wipe the contact elements.

Cleaning Apple Watch Series 3

If you are the owner of a Terte series watch, you need to use the Digital Crown and spin it to push water out of the smart device's case.


Apple Watch stopped turning on due to mechanical damage

No matter how carefully we treat our gadgets, mechanical damage is one of the most common types of equipment failure.

For example: the Apple Watch power button may be broken, so it cannot turn on!

Perhaps there was a strong impact that damaged the internal boards and mechanisms of the smart watch and disrupted its performance. To determine the causes of “mechanical” malfunctions, you will need a specialist. equipment and special inventory, knowledge and “direct hands”, in other words, you need to contact specialists at the official service center!

Apple Watch is the first smartwatch on the global market. Having developed and improved the iPhone, the Apple company invented a unique device that can work synchronously with it. The two gadgets provided not only excellent battery life, but also a great complement to each other.

The developers of the latest operating system have corrected all the shortcomings. There have been isolated cases where the clock froze, similar to a PC. This is due to intensive use, which places excessive stress on the device. The article discusses in detail the question of how to restart the Apple Watch. The conditions for a correct and safe procedure are also indicated here.

To restore operation, sometimes it is enough to turn on standby mode. Once the screen is unlocked, operation will return to normal.

You can control the watch using keys, gestures and a sensor. There are three ways to unlock Apple Watch:

  • Click on "Power"
  • Make a “view time” gesture
  • Touch the screen with your finger

If the watch does not start, try charging it.


For a complete freeze, there are 3 solutions:

  • Normal shutdown
  • Factory reset Apple

Warning! Resetting may result in incorrect operation. This action is not recommended. The usual option is the first method, the last resort is the second.

Standard shutdown

If your Apple Watch is frozen, try turning off your watch using the standard method. It involves performing the following actions:

  1. Hold down the “Power” key;
  2. Hold it for 2-3 seconds;


Note! These actions bring up a menu of shutdown, lock and economy modes.

  1. Click on the shutdown command;
  2. Expect the logo to display.


If you're a heavy Apple Watch user, you probably know that there may be times when you need to restart your Apple Watch. Eg:

  • A forced reboot of the Apple Watch may be necessary when you need to disable the eco mode that was manually activated on the watch. Rebooting is the only way to disable this mode;
  • The clock freezes and does not work correctly. If you see that your watch has started to slow down or work incorrectly, then the first way to solve the problem is to restart your Apple Watch.

Below we will look at two ways to reset the watch:

  • Easy reboot method - this method involves simply turning your device off and on. It’s very simple to do, below we’ll look at everything in more detail;
  • Hard reboot - this method involves a forced reboot if your device is completely frozen and does not respond to button presses or screen touches.

How to Restart Apple Watch

To perform a normal reboot, follow these steps:

Now the question “how to restart Apple Watch” is almost closed.

How to Hard Reset Apple Watch

Only hard reset your Apple Watch in emergencies. Initially, it is better to use a softer reboot option.

Perform a hard reset only if the watch does not respond to pressing and holding the “Power” button, or to touching or swiping on the Apple Watch screen. The hard reset procedure is simple and does not require any special knowledge or skills from you. Follow the instructions below to perform a hard reset:


After all the above operations, the reboot process will be completed.

These are the only two ways to painlessly and safely restart your Apple Watch. If you are offered to reboot in other ways or using special applications, then think several times before agreeing to it.

Since Apple's smart watches appeared on the market, they have become loved by many users. It's not just a watch, it's also an accessory. The functionality of the device is so great that it can be called a small smartphone, only on the wrist. But even Apple gadgets are prone to breakdowns. What to do if the watch does not turn on?

If your gadget doesn't turn on, don't panic. A common reason why Apple Watch does not respond to commands is a low battery. Unfortunately, the battery is their weak point. The manufacturer claims that the device can easily work for 2 - 3 years. If we translate this time into the number of charge-discharge cycles, then it is about 1000 times. But there are always factors that can reduce this number.

The reason for not turning on may be a system malfunction. In such a situation, a flashing of the gadget is required. After it passes, it is better to disconnect the connection with the phone and re-establish it. Another reason could be a broken display. Repairing a display is a complex task and should only be carried out by specialists. Contact the service center.

Charging problems

If this is your first time when the battery runs out, then put the watch on charge. You can find out that the gadget is charging by the appearance of a green lightning bolt (small icon) on the display. If the watch is not completely discharged, this icon will glow red. If you see just a black display with no images and no indicator icon, let the device charge for at least 30 minutes. There is no display due to the battery being completely discharged.

If recharging is not observed or a message appears stating that the battery cannot be recharged using this charger, do the following:

  • Check that the charging cord from the magnetic charger is inserted all the way into the USB connector on the adapter. Make sure the adapter is fully plugged into the outlet. If not, adjust the connection until it makes full contact.
  • Make sure that the outlet to which the adapter is connected is working and there is access to electricity in the room (check the light by turning the switch on and off). If the outlet is not working properly, connect the charger to another one.
  • Make sure that the charger for the Apple Watch and the adapter for it are included with the gadget. The use of non-original accessories may cause malfunctions of the device. Check the cord for kinks, damage or twists. Their presence can block the flow of electricity. If damage is found, replace the cable. Make sure there is no oxidation on the connecting elements. If there is one, carefully remove it.
  • Remove the plastic protective film from the charging tablet. It is glued on both sides.
  • Remove dirt from the back of the watch and from the magnetic tablet.
  • Reboot your gadget. To do this, press and hold two buttons: the side button and the Digital Crown wheel. It will take about 10 seconds until the “apple” logo appears on the display. After this, apply the back of the watch to the tablet, it will lie flat on its own. If you put the watch on the wrong side, it will “resist” contact with the tablet thanks to magnets. If there is no result, try the next step.
  • Try connecting the watch to charging using a different adapter and USB cable, or use a different tablet. Wait a little, if the battery is completely discharged, the device needs time to replenish the minimum energy level of the battery. If there is still no response from the watch, contact a service center for diagnostics and subsequent repairs.

Wireless charging for Apple Watch

If, after connecting another charger, it turns out that your charger is not working properly, it’s time to buy a replacement. Apple has released wireless charging for Watch. The advantage is, first of all, that this is a device from the same manufacturer. A pair will work perfectly. The device can replenish the battery charge from 0% to 60% within 30 minutes. Wireless transmission is carried out via the open Qi standard.

The battery capacity of the charging device is 200 mAh. In 1 hour 30 minutes you can replenish your energy reserves up to 80%. Within two and a half hours the battery will be fully charged. The exterior design is minimalist and ergonomic. This product will find a place in any corner. The shape is round, there is a thinning around the circle. White color.

Stations for recharging watches and phones

Below we will highlight some docking stations designed to charge your watch and phone at the same time. It’s very convenient when you can charge both gadgets on your nightstand at once.

Studio Neat Material Dock

This docking station is released by Studio Neat. The reputation of this company among users is very good, it is famous for its exclusive accessories. The station's construction includes walnut and balsa wood. The second material is used for the supporting parts. There is a place for a watch in front of a place for a smartphone. This allows the structure to make the most efficient use of space.

The back panel hides both cables for charging devices. There is a lock at the base that ensures a stable position of the entire structure. You can be sure that your devices are safe. Another advantage is the ability to adjust to different types of charging. The fit of the gadgets is adjustable; you don’t have to worry that one of the gadgets won’t fit in thickness.

The clamp provides a strong attachment to the surface while you remove or place the gadget in the station. The disadvantage of the station is that the kit does not include charging cables for connection and the need to assemble the structure.

FUZ Designs EverDock

The company does not have a docking station directly for watches and iPhones. But, the EverDock accessory supports compatibility with Apple watches. You can purchase a watch holder separately. It is attached to the smartphone seat. This device is perfect for another gadget, for example, a tablet. Then you can use EverDock Duo . This product is much cheaper in price than the docking station described above.

The design is equipped with silicone inserts. It is secured with a lock, so you don’t have to worry about the safety of your devices. The design of the design matches perfectly with Apple devices. The housing is made of aluminum, which allows for even greater integration of devices. The disadvantage of the station is that you will have to assemble it yourself. But don't worry about it, the kit comes with clear instructions.

Belkin PowerHouse

Belkin products are perfectly adapted for Apple devices. One of the advantages over the two stations described above is that the kit already includes the necessary cables for recharging. There is also everything necessary for switching.

The kit includes a cord and a charging module. You will not spend much time installing the structure. Wires sticking out in all directions won’t spoil the picture here, they simply don’t exist. A single cable, 1.5 meters long, provides power connection. The appearance of the product is beautiful, ergonomic, and goes well with chargeable gadgets.

The gadgets are arranged so that you can see them at the same time. In the first two products they were located one after another, here next to each other. The product does not have a special base lock, but it is quite heavy and stable. Don't worry, it won't tip over. The cost of the product is a little steep for the average buyer. But you won’t have to spend extra money on buying cables and a holder.

There are many stores in Moscow where you can buy such docking stations. If your place of residence is the Moscow region, then branded stores are also at your fingertips. Although many have been buying goods online through electronic stores for a long time.

If your Apple Watch won't turn on and refuses to respond to button presses, try to figure out the cause of the problem yourself. With the instructions and necessary tools, you can quickly fix simple problems. You can find out why the device does not turn on, check the integrity of the control board and the reliability of the contacts even without special skills.


Most often, the Apple Watch device fails for the following reasons:

  • the power button is broken
  • moisture has entered the protective housing
  • The watch is frozen after an update or due to a software glitch
  • due to mechanical damage, the watch display was damaged

A common reason why an Apple Watch device won't turn on is a low or damaged battery. In this case, the battery needs to be recharged or replaced. Hold the button on the side of the device and the Digital Crown to restart the watch until the Apple icon starts to light up.

Why does the device not start?

If your Apple Watch suddenly stops turning on, the problem may be due to a settings issue. Pay close attention to alerts that appear on your Apple device screen. In them, developers describe problems and give options for eliminating them. If your Apple Watch is running low, connect it to the charger and wait for the company logo to appear.

If your Apple Watch stops turning on or responding to charging, you can fix the situation in the following ways:

  • check the depth of insertion of the cable into the connector and the adapter into the socket
  • remove the protective film from the charger
  • clean the device from dirt and dust
  • restart the device (press the side button)


How to quickly reboot an electronic device

You can also check if the charging is working properly. If the Watch icon is lit, Apple should be charging automatically. To restart your Apple device and make sure your installed apps are working properly, press the button on the side of your watch and press the Digital Crown.

A common reason why the Apple Watch does not turn on is that the power saving mode is running. In this case, tapping the screen will not start the clock.

What you need to know before you start restoring your device

To turn on your Apple Watch, press the power button located on the right side of the device. At the same time, you will notice that the “apple” is lit. The download time is determined by your Apple device model and is usually about a minute.

The iWatch device belongs to the category of mini-computers, the installed applications on which must be updated periodically. Apple Watch users note that after updating the software, the devices begin to work faster. If you want to put your Apple Watch into battery-saving mode, hold down the button on the right side of the device until the Eco Mode slider appears.

No messages on display

The Apple Watch is unable to function after being discharged. The watch display on which notifications appear consumes a significant amount of energy. Often the reason why notifications do not appear on the device is that the clock is locked or the Do Not Disturb mode is activated. You can solve the problem in the following ways:

  • remove the password that is keeping your Apple Watch from turning on and keeping your watch display locked
  • make sure your Apple equipment settings are correct

Simple ways to fix devices

If you want to check if the charger is working properly, try restarting the watch. To do this, hold the Side button and Digital Crown for 10 seconds. If the charge icon is not visible, leave the Apple device connected to the charging device for several hours.

Simple ways to repair smartwatches that turn off spontaneously:

  • drying devices
  • replacing charger
  • setting up Apple technology parameters


Complex troubleshooting options

If your Apple Watch stops turning on and you can't immediately diagnose the problem, the problem could be serious. The malfunction may be due to a failure of the button responsible for turning on the device, a malfunction of the microcircuit, or other reasons.

To determine the cause of the malfunction, you will need special equipment and tools. With their help you can perform the following repair operations:

  • remove and replace the button responsible for turning on the Apple device
  • update the software if the watch freezes or turns off spontaneously
  • restore Apple watch power chip
  • replace the charger connector

Apple Watch users often have such problems - after discharge, the watch freezes or turns off. To force a restart, press the side button and the Digital Crown at the same time. If after rebooting the watch turns on, but you do not see that the “apple” is lit, or a notification with a red exclamation mark appears, this means that the device cannot be used due to a broken microcircuit or other parts.

An effective method for solving device problems

If your Apple Watch device does not turn on and you need professional help, contact the YouDo service providers. Specialists will quickly and inexpensively find out the reason why the device does not turn on, the clock is frozen or the power button has stopped functioning.

Cooperation with Yudu performers provides the following advantages:

  • provision of on-site services to any specified address
  • replacement of parts with original components
  • 24/7
  • experience in servicing all models of iWatch devices

Leave a request on this page, describing your problem (for example, “Watch logo is on, Apple is not charging”). Experienced performers will help you inexpensively any day of the week if your Apple Watch device does not turn on at all.

mob_info