Remove autostart programs. How to remove a program from startup
- This is the automatic launch of programs when you turn on the computer. Most often, this function is turned on independently when installing the program into the operating system. In some cases, autoload can be a very useful feature. You can configure it yourself and leave only the necessary programs in startup. It is worth considering that with a large number of active programs in autorun, the computer's RAM is consumed in a larger amount, as a result of which the system startup can slow down significantly.
Why are programs added to startup?
We have already said above that the installed utilities can independently add themselves to the startup registry. If necessary, the user can independently place any desired program to autorun so that when the computer is turned on, the system automatically starts a frequently used utility.
Why clean the startup registry?
First of all, this manipulation should be done if the computer system began to “slow down” and boot very slowly. Thus, you can free up a significant amount random access memory, the presence of which is an essential criterion for the quality of your computer.
Autoload may also contain super-important programs that contribute to the correct operation of the operating system. Therefore, when cleaning the registry, you should be extremely careful.
Shutdown in Windows 7
Read also: How to speed up Windows 10? TOP 6 Main ways to overclock the operating system
There are several answers to the question of how to disable startup programs in windows 7. Each of them implies a separate method of removal.
Method number 1. Uninstall via the start menu
Users who have been using this version of the operating system for quite a long time must have wondered "What is "hiding" in the Startup folder in the Start menu?".
More advanced users have long guessed that this folder can be used to disable autorun programs. To do this, open the Start menu, go to All Programs, then find the Startup folder and open it.
If there are no third-party programs in startup, when you open the folder, it will say "(empty)".
If third-party programs are present at startup, you can remove any of them yourself. For this, by necessary program right-click and select the "Delete" item, after which the item will go to the trash, from which it can be permanently deleted using the Shift + Delete key combination.
This method is the easiest, but in this case it is impossible to see all the programs that are in autorun. Some of them are hiding.
If clearing this folder did not resolve unwanted automatic program loading when you start your computer, we recommend that you try one of the methods listed below.
Method number 2. Using MSConfig
Read also: [Instruction] "Service Host: Local System" loads Windows 10 disk
This program is present by default in any version of the Windows operating system. There are 2 ways to call it.
In the first case, open the Start menu and enter "msconfig" (without quotes) in the search bar. After the system detects it, double-click LMB to launch it.
In an alternate run version, you need to run command line by pressing the Win+R hotkey combination. In the window that appears, enter the command "msconfig" (without quotes) and click the "OK" button.
After starting the utility, a window will open in which you can remove programs from the startup registry.
To do this, go to the "Startup" tab, and then uncheck the boxes for those applications that you want to disable. Turning off unnecessary programs, click the "Apply" and "OK" buttons.
If you do not know what this or that application is responsible for, it is not recommended to disable it yourself, as you can disrupt the correct operation of the operating system.
After that, you will be prompted to restart the computer, automatically sent by the system. It is not necessary to restart the computer, so in this case the choice is yours.
When using this method, installation of additional programs is not required, since MSConfig is a standard pre-installed utility for all versions of the Windows operating system.
However, this method will not allow you to remove absolutely all programs and applications from autorun, so we recommend that you consider the methods below.
Method number 3. Removing manually from the registry
Read also: [Instruction] How to reinstall Windows (7/8/10) on a computer or laptop | 2019
The registry can also be launched in two ways - through the search menu "Start" or the command line.
In this case, you need to enter the command "regedit" (without quotes). After starting, the main registry window will open in front of you.
In the left part of the window there are two autorun folders - local and personal. The first address is:
Computer\HKEY_ LOCAL_ MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ RunAnd for the second:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
To clean the registry from unnecessary applications, we need to get into the final folder (“Run”), navigating through the “tree” of folders as indicated in the address.
To remove applications from autorun, right-click on its name, and then select the "Delete" item in the context menu.
Cleaning is required in both sections.
In this case, we will use the program, which is freely available to all users on the official website. The utility is easy to use, takes up a small amount of memory on your hard drive, but at the same time, is best solution to clean autorun. Download
On the developer's website, the program is provided only in English. We will tell you how to use it correctly without knowing foreign languages.
The program is downloaded in a ZIP format archive, which can be unzipped using any archiver (7zip, WinRar, etc.).
After you unzip the downloaded file, four shortcuts will be presented in the window in front of you. To install the program, we need the autoruns.exe file, which needs to be run as an administrator.
When you first launch the application, you will be required to accept the license agreement by clicking the "Agree" button.
After that, the window of the program itself will start. This means that the utility does not require installation on the computer system.
By default, the application window will open in the "Everything" tab at startup. It presents all, without exception, programs and applications included in autorun.
For the convenience of users, there are also tabs in which applications are divided into categories (Winlog, Driver, Explorer, etc.).
To remove autorun, you need to uncheck the box next to the unnecessary application. If you select a line with a single click of the LMB, then from the bottom of the window you can see information about the program that is in autoload (version, size, location path, etc.).
When you go to the “Logon” tab, you will see a list of programs that were previously disabled in other ways.
The links provided lead to trusted sources and do not carry malicious files or viruses. In no case do we recommend downloading programs from dubious resources, as you can cause irreparable harm to your computer system.
"OK" .
The window that opens will display the autoload data for the current user.
To view the startup registry data for all users, enter the "shell: common startup" command (without quotes) into the command line.
The window that opens will display the autorun applications for all users who have account on this computer.
To disable autoload, delete folders of unnecessary applications.
Have you noticed that over time, even the most powerful PC starts to slow down. Why is this happening? The reason is the software installed in the system, which starts automatically after the OS starts. To solve this problem, consider how to remove autorun Windows programs 7.
Is it necessary
What happens after turning on the PC? System utilities and programs are loaded for which automatic loading in the background is configured. It can be: Skype, ICQ, antivirus. They are displayed in the system tray (near the clock).
The more there are, the longer it takes to load. The installed software runs in the background and can be demanding on system resources (RAM).
Why do they automatically start
Some applications do this automatically. Invented by the developers with the following considerations:
- Be in touch. Refers to Skype, ICQ applications;
- Torrent clients for downloading files;
- DropBox, Google Drive services. Automatic launch is needed to synchronize the cloud and data on a PC;
- Utilities that control equipment. For example, software for switching monitor modes, programs for working with a video card.
Let's take a closer look at where to disable autorun programs in Windows 7
Do not disable applications whose purpose you do not know. This will lead to unstable operation of the system.
How to disable autorun programs in Windows 7
When using popular software, the launch is disabled in the application settings. For example, in Skype, to do this, disable the "Run at startup" checkbox. 
But not every program has such an opportunity. What to do? Consider popular methods
Disabling using the Msconfig system utility
Use this method if you need installed software and don't want to remove it. There is no need to install or download anything from the Internet. To remove the application, press the Win + R keys. A window will open where you write the command "msconfig.exe". 
A window will open where go to the "Startup" tab. 
A list of applications that start automatically after download will be displayed. Remove unnecessary ones. Disable the checkbox next to the program. 
Click OK. A window will open where the OS will offer to restart the PC or exit without restarting. Select the second option, then when you turn off the PC, the system will be updated and the changes made will be activated.
The easiest way to open autorun programs on Windows 7
Go to "Start" - "Programs". Click on "Autoload". Everything that is displayed in it starts after the OS is loaded. How to limit startup? Delete all applications in this directory. 
Disabling autorun programs in Windows 7 in the registry
Open the Registry Editor. Press "Win + R", then write the command "regedit". We find the registry branch, as in the screenshot. On the right, a list of programs and services that start at system startup will be displayed. 
Do not remove services whose purpose is not clear to you. This will make the system unstable. If software is installed that you do not use at work, remove it from the HDD, and not just from startup. I recommend using .
How to disable autorun flash drive Windows 7
When the flash drive is connected, a window opens. 
This is convenient, but if there are many files on the removable media, the system will freeze. This is especially true on weak PCs. It is also a way to distribute malicious software and viruses. To ensure the safety of it.
Click "Start" - "Control Panel" - "AutoPlay". A window will open where disable the checkbox from the item: "Use for all media". 
How to turn off using third-party software
Conclusion
We looked at how to disable autorun applications in Windows 7. I recommend that if there are programs on the PC that you do not use, delete them. Use a specialized one for this.
The Windows XP operating system has a huge number of useful features. One of them, of course, is.
When installed, some programs add special information about themselves to the system registry, thereby causing the operating system to start them on every boot. This saves you time, for example, you do not need to run the antivirus when you turn on the PC - it will load automatically using the information stored in special sections of the system registry. Program Microsoft Office, for example, also stores some of its elements in Autoload, allowing you to increase the speed of starting Word or Excel.
As you accumulate all sorts of programs on your computer, the "Startup" list grows and grows...
At first glance, everything is fine, convenient and fast, but if you look in more detail, you can find quite a lot of pitfalls and disadvantages of Autoload. It can be used by viruses, spyware and just unwanted applications, so we will look at ways to remove a program from Startup Windows tools.
So, we have already said that all information about downloaded programs is stored in the system registry. Many programs use the Autoload feature to speed up or facilitate the user's work, but there are those that PC users would like to permanently exclude from the list of automatically loaded programs. In order to remove a program from Startup, there are a huge number of utilities and programs, but it happens that they are not at hand. This is especially true for novice PC users who are not burdened with such problems until some kind of virus infects their operating system. Fortunately, operating system Windows contains built-in tools to combat unwanted software, which strives to start up with the operating system and go unnoticed.
1. How to remove a program from Startup in the Start menu
The easiest way: You need to open
Here you see a list of programs that are loaded with your operating system.
You can simply drag the shortcut of the desired game or program here to let Windows know that you want it to run every time you start the OS.
By removing this shortcut, you remove the program from the list Startups, but not from a computer, so you don’t have to be afraid that you will overdo it! Nothing complicated, right?
However, the Start menu is not the only way that viruses use to get away from the eyes of a novice user. There is a much more complicated method - an entry in the system registry.
2. How to remove a program from Startup in Msconfig
The method described above often does not work, since viruses and spyware on our PC are able to hide much more reliably. The menu is used only by benign programs that do not hide their presence.
You can launch a more powerful utility for finding and removing a program from Startup by opening Start - Run
- msconfig. I usually use this method, so I will describe it in more detail.
So let's press Start - Run.
A small sign will come out - type msconfig in the line- press "OK" (or Enter)
After that, another plate will crawl out. Select from the top tabs
Be here ATTENTION- do not click on other tabs and do not change anything :-)
We go strictly by points.
Carefully review the list for names that are similar to recently installed programs.
Here, too, - don’t touch what you don’t know :-) And you can always clarify what kind of process this is from Google :-)
To remove from Startup, just uncheck the boxes next to suspicious and unnecessary programs. Let's look at my example:
Because I know exactly what these processes are, and I know for sure that I don’t need them - I uncheck the boxes on the left of the processes.
Novice PC users need to be extremely careful here, since disabling a system program or component can damage the operating system
Then press Apply (or OK)
Then just close this sign with a cross. After that, this will pop up:
Restart your PC to apply the settings.
If something went wrong and your OS does not boot or reboots during boot, log in and return the unchecked boxes back.
I'll just add -
Now, when you turn on the computer, two signs will crawl out -
1.- the same one in which we changed the "autoload"
2.- with the text something like "you have changed the settings. If this did not worsen the computer's performance ...." and even there :-) This is not so important, we did not change anything special, except for autorun. But, just in case, we just close these plates, we work with the computer as usual.
If everything is fine (which it should be if nothing extra has been turned off) - the next time you turn on the PC in this plate, check the box "do not show this window again" and that's it :-) It will no longer bother you :-)
3. How to remove a program from Startup in Regedit
Here we have reached the System registry. Here we can find the most complete list Automatic download and its parameters. To enter the built-in registry editor, go to Start - Run - regedit .
In the window that opens, you see all the keys (tweaks) of the registry, sorted into folders. We need to get to the information about Autoload, so we open:
HKEY_LOCAL_MACHINE - SOFTWARE - Microsoft - Windows - CurrentVersion - Run
On the right side of the window you will see a list of programs Startups. This removal method is much more convenient, since by double-clicking on the desired element, you will see a link to the executable file. That is, speaking for beginners, you can see which program is loaded without your knowledge and from which folder.
After reviewing the list, remove unnecessary programs by pressing the button Del.
To do this, select the section Run and press File - Export.
In case of problems, you can restore the registry information by double-clicking on the resulting file.
4. Ways are more complicated, but more effective and suitable for almost all operating systems:
Use XP Tweker, built into Total Commander or as a separate program, there is a separate menu - Startup - where you can select startup programs. Well, the Total Commander program can be easily downloaded on the Internet by typing its name in a search engine!
Almost every program installed on a computer tends to put itself into startup. Therefore, the icons in the system tray (Tray - next to the clock) are becoming more and more, and the boot time of the operating system, every day, is increasing and increasing!
In most cases, there is no need for automatic loading of programs. How can I turn off program startup and reduce the number of icons near the clock?
Removing programs from startup in Windows 7 is done like this.
Press the START button 1, then enter the word in the search line 2 msconfig and press the search button 3 . Although, most likely, you will not need to press the button - the search will be performed automatically.
Rice. 2
Named msconfig, 1 program was found (Fig. 2). Click on the name msconfig.exe
Rice. 3
The System Configuration window will open (Figure 3). In this window, select the Startup tab (circled in red pencil).
Rice. 4
In the list of startup items, calculate those programs that are brazenly loaded when Windows startup, put their icons next to the clock, and sometimes even open their dialog boxes when no one asked for them!
In my picture, you can see: the programs that run in automatic mode are marked with checkmarks. But this is the tip of the iceberg! Below is a list of several times larger programs whose autorun is disabled.
Your actions on this tab are to remove the checkmarks in front of programs that are automatically loaded when Windows starts, but you do not want this!
Of course, by name Startup element it can be difficult to determine which program the item belongs to. Then see which program folder the Command leads to. If you can't see the entire Command line, then use the mouse cursor to drag the separating element between the words Command and Location to the right. Then the whole line will open.
You don't need to turn off autoload. antivirus programs and firewalls.
In addition, for example, I have a Punto Switcher program that automatically switches between Russian and English keyboard layouts. When you work on the Internet, this program is simply irreplaceable. Naturally, every time you will get tired of launching it yourself. Therefore, the best option is when it is in autoload.
But the programs Download Master, Adobe Reader and many others can be launched if necessary - why should they hang around at startup all the time.
After you remove the checkmarks in front of some programs, click the Apply button, and then OK (Fig. 4). The following message will appear.
Rice. 5
If you want to immediately admire the result of your actions, then click the Restart button. And if you take your time, then press the Exit without restart button, and all the changes you have made will take effect after the next shutdown or reboot of the computer.
If the result is unexpected - somehow I accidentally disabled the system clock along with the language bar, don't worry! It is enough to set the checkboxes back, reboot and everything will return to its place!
Removing Startup Programs in Windows XP
In Windows XP, removing programs from startup is done like this. Press the Start button and open the main menu.
Rice. 6
In the main menu, click the Run button.
Rice. 7
The Run Program window opens. In the Open field, type: msconfig and press the OK button.
Rice. 8
You will see the System Settings window. You will see 6 tabs in it. On five tabs, you don’t need to touch anything! Immediately click the cursor on the tab -. Its general view is as in Fig. 8. Only the programs you will have are those that you set, but not the same as mine.
In my picture, you can see: green checkmarks mark programs that run in automatic mode. But this is the tip of the iceberg! Below is a list of several times larger programs whose autorun is disabled.
You look through the list of programs and remove the green checkmark in front of unnecessary, in your opinion, programs.
After you select the startup items to disable, click the Apply button, and then OK (Fig. 8). The following message will appear immediately.
Rice. 9
If you want to immediately admire the result of your actions, then click the Restart button. And if you are not in a hurry, then click the Exit button without rebooting, but all the same, the changes you made will take effect after the next shutdown or reboot of the computer.
Disabling startup in Windows XP and Windows 7 are similar, so in order not to repeat yourself, you can see my tips under Figure 4.
Disable startup programs in Windows 10
Easier and faster, you can disable startup programs in Windows 10 through Task Manager.
To call the Task Manager, press the keys Ctrl+Shift+Esc and a window appears in front of us:
Disable startup programs in Windows 10 In the Task Manager window, click the Startup tab. The tab shows a list of programs installed on your computer, where the Startup status is indicated: enabled or disabled.
Click on the program for which you want to disable autoload. The line will be highlighted in blue1 . Click the Disable 2 button and autorun this program during Windows boot will not work.
By the way, on button 2, instead of the Disable command, Enable will appear. That is, if you accidentally disabled the wrong program, you can correct the error and, by pressing the button again, enable autoloading of this program.
In this article I want to tell you how to remove a program from startup. Many users of their computers do not even suspect that if you remove some programs from autorun, their computers will boot many times faster.
Let's take a case from life. You bought a computer, it has just installed windows, everything works quickly, everything suits you. You start installing various programs on it, mail agent, google chrom, adobe products and other programs you need to work. And at such a pace for a month or two, you put, and put programs. Then comes the turning point, when the computer starts to boot for a long time. You are indignant: how so? One of the reasons why the computer takes a long time to boot after entering a password or a welcome window is that you have a lot of programs in autoload that start with windows when the computer boots.
There are many third-party programs that can help fix this issue. I'll tell you how to remove programs from startup, without any programs.
In Windows XP, windows vista, windows 7 - the removal of unnecessary programs from startup is configured in the same way.
Enough preamble, let's get down to the process.
Click Start => Run. You will see a window like the following:
In windows 7, if you click Start, then there you will not see the item run, so windows 7 users press the keyboard shortcut. Win + R. These keyboard shortcuts can be used on any operating system.
In the "Open" field, enter the command msconfig, click OK. You will see the following window.
Be careful not to change anything in this window or its layouts unless you are sure.
Here we are seeing a lot of programs that load automatically, you will have checkmarks everywhere, I have already unchecked them so that my computer boots faster.
You can turn off all the programs you don't need. How do you know what is needed and what is not?
Now I will list the programs that should not be disabled.
Antivirus; (antivirus, in no case should you disable it, you yourself understand that a computer without an antivirus will be susceptible to virus infection)
Ctfmon; (tracks active windows and provides text input service support for speech recognition, handwriting recognition, keyboard, translation, and other user input technologies)
All other programs can be safely disabled, your computer will not receive harm from this, only benefit.
Once again, you can disable all programs, except for those that I listed above. If someone is eager to find out in more detail what each program is for and what it is responsible for, then I can give you good advice, use google. We enter the name in the search engine and read what it does. There is also another option. There is a column called "command", in this column you can find out where the program you are interested in is located - just go to the directory where the program is located.
We have learned how to remove unnecessary programs from autorun in windows XP / Vista / 7 operating systems.
To date, the operating room is breaking forward windows system 8. She has a slightly different sequence of actions for removing programs from startup.
Let's look at this sequence in more detail.
If you also press start => execute, and enter msconfig. The same window will open, but if you switch to the autoload layout, you will see the following window.
Where they write to you that it’s not fate, go to the task manager. Click "Open Task Manager", you will see a window like this.
I disabled all the programs I don't need, in the "status" column you can see the status of the program, disabled or enabled. To disable or enable the program, click in the column on the word, for example, enable, right-click, the context menu will drop out, where you can select the next item, disable, open the file location, search the Internet, properties.
Let's look at an example: hkcmd Module. I don’t know if I need this program or not, the name is incomprehensible, the publisher is intel, it’s not clear from the name and the publisher what this program can do, the state is on. I right-click and select search on the Internet. The second link from the top, I read, it says that this program is installed with graphic cards, provides support for hotkeys, and many more letters. I do not need this program, feel free to turn it off. Now my computer will boot, even a little faster. I hope you understand more after this example.
In this article, you learned how you can free up some memory by removing unnecessary programs from the startup of the operating system.
Video tutorial on removing programs from startup
