Batch photo processing in GIMP. Batch Image Processing

The free Easy Image Modifier program is designed to batch reduce the size of images. Using the program, you can reduce the size of several photos at once with the specified settings. Naturally, you can reduce the size and change the properties of an image one by one, processing only one specific photo in the Easy Image Modifier program.

Easy Image Modifier also allows you to enlarge images. Just keep in mind that if you increase the image size, the quality of the photo may suffer.

Resizing an image may be necessary in many cases. Much more often you may need to reduce the size of photographs than, for example, enlarge images. Uploading images to the Internet, sending images by email, all this requires reducing the weight of photos.

To reduce the size of an image, you can use a simple, tiny free program called Easy Image Modifier. You can download the Easy Image Modifier program from the official website of the developer.

Easy Image Modifier download

The free program Easy Image Modifier has an older paid version - Easy Image Modifier Plus, in which some options are added to the program (saving in JPG2000, PDF formats, more advanced editing).

The Easy Image Modifier program supports the Russian language and does not require installation on your computer. After downloading the program to your computer, you will need to unpack the archive with the program. To launch the program, you will need to open the folder and run the “EasyImageModifier” file (type - application).

Since this program is portable, you can run Easy Image Modifier from any place convenient for you on your computer or, for example, from a flash drive. For ease of launch, you can create a shortcut to the program on the Desktop.

After launch, the main window of the Easy Image Modifier program will open. Below the menu bar on the left are sections with buttons to perform certain actions. On the right are the buttons “Upload image”, “Upload folder”, “Process”. Below these buttons is the program's work area.

Using the “Upload images” and “Upload folder” buttons, images for processing are added to the program.

Adding images

To add a photo to the Easy Image Modifier program, you will need to click on the “Upload Images” button. An Explorer window will open in which you can select the desired images to add to the program. You can add just one graphic file or select multiple images to add.

Files can also be added by dragging them into the program window.

After this, in the “Uploaded Images” area, which is located in the central part of the program window, you will see a list of added photos. You can process one image or add multiple photos to the program to resize the photo.

The added image will be displayed in a special window, which is located close to the main program window.

You can start editing one photo or add several more graphic files to this list for batch processing.

If you no longer want to edit some images, you can delete them from the Easy Image Modifier program by first selecting these photos using the “Delete Selected” button. If necessary, you can delete all photos added to the program by clicking on the “Clear list” button.

To add the contents of a folder to Easy Image Modifier, you will need to click on the “Upload Folder” button. All images from the folder will be added to the Easy Image Modifier program, including those folders that are inside the selected folder.

Then you can proceed to editing by selecting the appropriate item in the “Editing” section.

In this review, I added one image to the program. When batch reducing photos, exactly the same actions are performed. In most cases, it will be enough just to select the size for the images, the format in which the images will be saved, and select the folder to save. After this, you can start the photo processing process.

Resizing Photos

To reduce or increase the size, you will need to click on the “Resize” item on the left side of the program window. In the new program window, you will need to activate the “Activate resizing” item. In the appropriate fields you can change the image size by selecting the numerical sizes suggested by the program.

You can set your own values in the corresponding fields to resize the image. Images can also be changed by percentage if you activate the corresponding item. The photo will be resized to a percentage of its original size.

By default, the “Keep proportions” item is activated in the program. Depending on what exactly you will be doing, you can uncheck the box next to the “Decrease” or “Increase” items.

Rotate and flip

If you need to rotate the image or make a mirror image, then click on the “Rotate/Flip” button.

Next, activate the “Activate reorientation” item. After this, you will need to select the appropriate setting from the drop-down list to rotate by the required number of degrees, or select a mirror image horizontally or vertically.

In a special window you can observe the changes that are displayed immediately after the settings are made.

Using the “Add Upholstery” item, you can fill the background around the image with some color by selecting the color and size of the background. This is a kind of photo frame.

Adding a watermark

You can add a watermark to your image to protect it from being copied and used by others on the Internet. To do this, click on the “Add watermark” button, and in the window that opens, activate the “Activate watermark” item.

In the “Watermark” field, enter the desired entry or the name of your site.

Then click on the button opposite the “Font” item (the button displays the font type and its size). After this, the “Font” window will open, in which you can select the font to apply the watermark. You can choose the font type, its style, size, and character set.

After setting the font, click on the “OK” button.

Finally, using the drop-down menu buttons, you can select the location of the watermark on the image.

Removing metadata from an image

If you post your images on the Internet, then you may be advised to remove the metadata (EXIF) that is stored in the images. To do this, in the “Advanced” section, click on the “Edit file properties” button.

In the window that opens, activate the “Delete meta data” option. Here you can, if necessary, also change the file date by activating the “Change file date” item.

Saving images

In the “Save” section you can select the format for saving the image. By default, the program will save images in JPG format.

The Easy Image Modifier program offers the following formats for saving images:

JPG - lossy compression, small file size.
PNG - compression without loss of quality, average file size.
BMP - uncompressed, largest file size.

After activating the “Quality” item, you can additionally, if necessary, adjust the image quality by moving the slider along the quality adjustment scale.

After clicking on the “Rename” button, if necessary, you can activate the “Activate name change” item to rename images.

After clicking on the “Set Destination” button, in the window that opens you can select a location to save the processed images. Here, by default, the “Activate Destination” item is activated so that the processed photos are saved in another location and do not replace the original files.

A folder has been selected in the program to be created on the Desktop. You can choose to save to any other folder on your computer.

Finally, in the main program window, click on the “Process” button to start the image conversion process. Next comes the process of converting the file or files if the photos are processed in batch mode.

After image processing is complete, you can open the folder and look at the result.

Conclusions of the article

Batch editing photos in the free Easy Image Modifier program allows you to reduce the size of images, choose a display method, add a watermark, and remove metadata from the image.

Easy Image Modifier - batch image processing (video)

A digital camera has long ceased to be a curiosity and has become one of the necessary and familiar things. Outdoor trips with friends or a festive feast with the family are saved in the form of hundreds of pictures. Sorting and editing memorable images is a tedious task. This can be made easier by batch processing in Photoshop from Adobe Systems - an effective tool that saves time when working with large arrays of images.

Application of batch processing: benefits and convenience

The Adobe Photoshop graphic editor, popular among amateurs and professionals, does not need advertising. It is a powerful and versatile image processing software tool designed to bring a wide variety of creative tasks to life. But professionals valued it for another feature - its ability to make routine machining work easier and faster, such as reducing size and weight, renaming or changing file extensions.

Processing several photos in Photoshop, as a rule, does not take much time and does not require you to delve into the intricacies of automation processes. But what to do if the archive begins to take up too much space? But you never know the troubles await a photographer: insufficient lighting, bad angle... You don’t want to delete pictures, and editing takes up scarce time. When correcting errors of the same type or if you need to perform other mechanical processing that does not require individual understanding of each image, use the process automation package available in each version of the graphic editor.

Dialog Box: Description

First, get acquainted with the settings in which batch processing of photos is performed. In Photoshop, use the path: menu “File” → “Automation” → “Batch Processing”. The window that opens is characterized by design changes depending on the modification of the program, but the main dialogs remain unchanged.

The Setup window reflects the Default Operations value. By creating new sets, the creation of which will be discussed below, the user expands the functionality of using automation for the necessary tasks.
"Operation" window. The drop-down list is made up of macros offered by the program developer. When you add custom operations, they will appear in the drop-down list and become available for batch processing.
The “Source” window and the adjacent “Select” button—defining files for processing:
- the line “Folder” indicates a directory with photographs;
- the “Import” line selects imported images;
- line “Open files” - processing of files opened in the main working window of the program;
- the Bridge line synchronizes the program with the Adobe Bridge application.
Output Folder window and Select button. Specifies the directory to save modified files and other options for completing the operation.

Extra options

The parameters left without consideration are intuitive and highlighted with developer tips and recommendations.

Checking the “Ignore “Open” commands” checkbox leads to the opening of files only if this action is specified in the operation. Otherwise, quick photo processing in Photoshop will not be performed.
The line “Include all subfolders.” The function extends the operation to directories located in the source folder.
The following lines cancel the display of service dialogs informing about the opening of image files and program messages about the built-in color profile.

Default set: built-in assistant

The operations built into the program by default are more of a visual illustration of process automation than the useful functionality that batch processing of photos in Photoshop provides. But to understand the work, it makes sense to understand the preset operations in the editor. To do this, go to the “Operations” tab. It is located among the floating palettes located on the right side of the program's workspace. If the Operations tab is not visible in your workspace, turn it on. To do this, go to the “Window” menu and click on the “Operations” line or use the keyboard shortcut ALT + F9.

The tab that opens contains operations predefined by the developer. By clicking on the triangle in front of the operation name, a sequence of actions opens, which is played back when the command is executed. The macro starts running when you click on the triangle located at the bottom of the “Operations” panel. Double-clicking on the name of an operation initiates the appearance of a dialog box that allows you to change the name of the operation or assign a shortcut key to it.

Create your own sets: for all occasions

For ease of use, create custom sets for storing recorded macros. This will be its own folder with processing operations placed in it. This approach helps organize image editing tools and pinpoints their location and purpose.

The process of recording sets is not difficult even for a beginner.

Open the Actions panel (Window → Actions menu).
Click on the “Create a new set” icon at the bottom of the panel.
In the dialog that appears, enter the name of the set and click OK.

The new set is now ready for recording operations and is reflected in the Set drop-down list in the Batch Photo Processing window. Photoshop allows you to create an unlimited number of sets for storing custom macros.

Operations: The Basis for Batch Processing

Batch processing of photos in Photoshop (CS6 or another version of the editor) is carried out according to rules common to all versions. By recording a macro with its own algorithm of actions, the user creates a template (blank), which is subsequently used to process single files or batches of images.

To get started, go to the "Operations" tab using the ALT + F9 key combination.
At the bottom, click on the “Create a new operation” icon.
In the window that opens, give the future macro a name, determine its place in existing sets, and, if necessary, set a keyboard shortcut.
Clicking the “Record” button initiates the start of the process, and a red circle icon is activated on the bottom panel of the “Operations” window. From this moment on, actions performed with the open image are recorded.
To complete recording, left-click on the square located at the bottom of the “Operations” tab to the left of the “Record” button.

Image operations: recording

If you managed to find the location and understand the purpose of the dialog boxes described above, then it’s time to apply theory to practice. Before you start editing, decide what to do and how to do it. Resizing a photo on a computer is the most common task that users set themselves. Using this example, we will consider the sequence of actions.

Step 1. Open the original image for editing.
Step 2. Create a new set. For convenience, call it “Reduce Size”.
Step 3. Create a new operation based on the instructions described in the Operations section. After clicking the “OK” button, the round red button at the bottom of the panel is activated. This means the macro is being recorded.
Step 4. Reduce the image size in any way you know. For example: menu “Image” → “Image Size”. In the dialog box, change the horizontal (vertical) size or reduce the resolution.
Step 5. Save the image and click on the square icon at the bottom of the Actions panel. The macro recording is complete and the user is ready to start batch processing files.

Image weight reduction: 100 shots in 60 seconds

The recorded and saved operation is the foundation of actions, the continuation of which is batch processing of photos in Photoshop. Reducing the image size solves another important problem for amateurs - reducing the weight of the file. Follow the sequence of actions that will help you process an array of photographs in a short time.

Open the Batch Processing dialog: File menu → Automation → Batch Processing.
In the drop-down window, select the set in which the size reduction operation is stored.
Select operation.
In the “Source” line, specify the folder containing the files to be changed.
In the “Output folder” line, specify the directory to save.
In the “File naming” block, select the necessary values for assigning new names to the processed images. A minimum of two lines must be filled in: the file name and extension. Without this condition, the automated batch processing process will not begin.

To begin the operation, click on “OK” and watch how the images independently open in the working program window, change size and are saved in the folder designated for them.

Renaming: quickly and usefully

In the section “Operations with Images,” an illustrative example was considered on a computer using Adobe Photoshop. Using the algorithm (sequence of actions) of this example, you can perform other image processing operations. Owners of digital cameras are faced with the need to do this because after clearing the drive, new numbering of pictures begins. This causes a conflict when adding photos to the shared pictures folder on your computer. The problem can be easily solved using the automation process.

Step 1. Open the Actions panel using the keyboard shortcut ALT + F9.
Step 2. Open the image.
Step 3. Create a new Rename operation, click OK to start recording the macro.
Step 4. Without doing anything, save and close the image.
Step 5. Click on the square icon at the bottom of the “Operations” panel and finish recording.
Step 6. Open the “Batch Processing” window (menu “File” → “Automation”).
Step 7 Specify the source folder and the folder to save the renamed files.
Step 8 In the “File naming” block, select the appropriate naming option from the drop-down list. Please note that it is possible to combine names using multiple lines. Don't forget to add the file extension as the final line.

Changing the extension

Even simple photo processing in Photoshop provides functionality and ease of use. It is not difficult to master the interface of Adobe's graphic editor in Russian. For users working in the English version of the program, we will illustrate the following example using English menu terms.

Let's consider the operation of changing the format. The need for such actions often arises when you want to save photos to mobile devices. For example, there is no point in transferring images in .raw format to a tablet running Android OS. It is preferable to save a file that can be easily played by all devices.

Open the image file.
Enter the Actions panel from the Window menu.
Create a new operation by clicking on the icon in the form of a sheet with a curled corner at the bottom of the panel.
Without changing anything in the file, save the image using the Save as... item in the File menu. In the save dialog box, select the desired file extension from the bottom line.
Click the square at the bottom of the Actions panel to finish recording the macro.
To start batch processing, go to File → Automate → Batch.
Select the name of the operation, source folder and directory for saving images from the drop-down lists. Click the "OK" button to begin processing.

Conclusion

It is impossible to describe in a short article all the lessons of photo processing in Photoshop (CS6 or another version), demonstrating the software's potential for automating image editing processes. The described examples give an idea of the principles of batch processing. By recording complex macros, amateurs will expand the range of use of this function and the list of creative tasks that can be solved. All versions of Adobe editors support the described algorithm of actions, so there is no problem with which Photoshop is best for processing photos.

Often there is a need to bring a large number of photographs to the desired size or place a logo on each one. If you do this manually with every image, you can go crazy. Therefore, in this lesson I will describe one of the methods batch photo processing in Photoshop.

In this lesson, we will consider the following problem as an example:

There are many large photographs and they need to be placed on a blog with the site logo. Photos should be no more than 552 px in width and saved using “Save for Web” with a quality of 60% and a sharpen filter should be applied to them for sharpening after resizing.

Let's start implementing batch photo processing in Photoshop

First. Let's create two folders on the computer. Let’s call the first “sources”, the second “results”. We place all our raw photos in the “sources” folder.

Second. Open any image from the “sources” folder in Photoshop and write an Action for it. To do this, on the Action panel, first create a new set (click on the folder icon):

Let's call it “Size + logo”. Immediately after creation, the Action begins recording your actions (the record indicator lights up red).

Third. We make all the necessary changes with the image:

a) Resize using Image/Image Size . Check the boxes Constrain Proportions And Resample Image , and in the Width field set the value to 552 px (this is the width of the column with text on my blog).

b) Add a logo. To do this, click File/Place and find a file with a pre-prepared logo (or watermark) and press the Place button. After this, the logo will appear on the image; you need to place it in the desired place and press Enter.

c) Sharpim. Select the layer with the image in the layers panel and apply Filter/Sharpen .

d) Save the image to the “results” folder using the “Save for Web” command

Fourth. Our Action is ready, so it needs to be stopped. To do this, click on the corresponding icon:

We close the image and delete it from the “results” folder so as not to get confused in the future.

Fifth. Now we need to apply an Action to a group of images. To do this we go to File / Automate / Batch…

Fill in the required fields and check the boxes as in the screenshot:

Click ok and watch how Photoshop does everything for us.

This method is very convenient when you need to prepare some kind of report for a blog or process a bunch of photos with the same settings (for example, increase sharpness or make all photos black and white). These actions can be performed with other programs, and some people claim that it is easier, but for me personally it is easier to do the processing in Photoshop.

When a novice photographer is faced with the need to process a large number of photographs, the question inevitably arises: How to reduce the time spent on processing, how to automate routine operations?

To do this, Adobe Photoshop has several tools in its arsenal: operations or actions, scripts or scripts, and droplets.

Operations, otherwise also called action, macros or macro commands are recorded and saved actions on an image that can be applied to another image and also used in batch processing. Actions are also the basis for creating droplets.

Droplet is a small application, a kind of program that automatically processes all images dragged onto it. The droplet icon can be placed, for example, on the desktop and folders with images can be dragged onto it for processing.

Scripts or scripts are also programs, but written in one of the scripting programming languages. The use of scripts allows you to automate operations for which it is impossible to write an action, that is, the possibilities of scripts are much wider. The only negative is that to write scripts you need to master certain programming languages, for example, Java Script.

In this article we will record a simple action and look at how to use it in batch processing using the command Image processor

As an example, let's take the method of toning photographs using color fill in blend mode Hard light. Here is the original photo

First, let's create a set into which we will place the operation to be recorded. To create a set, click on the folder icon in the Operations palette. In the dialog box that opens, enter the name of the set.

Now, with active typing, click on the icon for creating a new operation

In the dialog box that opens, enter the name of the operation. If necessary, assign a color and keyboard shortcut so you can quickly launch the operation. Click Write down to start the recording process. Now in the palette Operations The recording icon will be active and turn red.

Before you start recording, it is advisable to plan all the steps and write them down on paper. A well-planned action works without errors and the stability of its operation does not depend on which version of the program is used, Russian or English. A properly recorded action will work in any environment. If this is not the case, it means that methodological errors were made during planning and recording, for example, the names of layers or channels were written down.

Now let's create an adjustment layer Color. To do this, click on the icon for creating an adjustment layer in the palette Layers, then select a layer from the list Color.

In the dialog box that opens, select the desired color. It is necessary in advance, even when preparing for recording, to write down the values of this color along the RGB channels, so that you can then enter it and immediately get the desired color.

Change the layer blend mode to Hard light

We will get something like this

Now you need to weaken the effect of the correction layer on the skin. Skin is known to be lightest in the red channel of the image. Let's make the adjustment layer mask active. To do this, press the key combination CTRL+\. The active layer mask will be surrounded by a frame

Now let's load the red channel of the image onto the mask. To do this, go to the menu Image - External channel. In the dialog box that opens, set the following settings Layer - Background, since it is from the background layer that we will use the red channel. Channel - Red, you need to check the box on the right Invert, since for the mask we need just the inverted red channel, Overlay - Normal, Opacity - 100%. After completing the settings, click OK. The adjustment layer's effect is now rendered through a mask based on the inverted red channel, which looks like this:

We got a slight toning effect on the image

You can now stop recording the action. Then, returning the image to its original state using the palette Story, you need to check the operation of the action. Now it can be used for batch processing.

Batch processing is best done using a script Image processor. It can be found in the menu File - Scripts - Image Processor.

Or, which is much more convenient, you can run the image processor from the module Bridge, having previously selected photos for processing in it. In Bridge Image processor is in the menu Tools -Photoshop - Image Processor.

Set Batch Processing Options in the Dialog Box Image processor is not difficult. You need to select the location to save the files, the format and quality of saving, as well as a set of actions and the action itself that needs to be applied to the selected images.

In this lesson we will look at the basics of automated photo processing in Photoshop and their practical application. We will create a set of operations and then apply it to other images.

Batch processing will significantly save your time and eliminate the need for tedious repetition of the same steps when editing images. Let's explore this useful technique in practice.

Creating operations.

Preview of the final result:

Step 1.

Not everyone is a fan Photoshop is a graphic or web designer. For convenience and ease of use in the program for ordinary users or people indirectly interested in Photoshop, there is a function for recording all actions performed on an image, and then applying these actions to edit other documents in the program.

The first thing we have to do is select the photos to which we want to apply some changes and place them in one folder anywhere on your computer. Then, select one photo from your collection and open it in Photoshop.

Step 2.

Now let's start creating operations. To do this, go to the top menu of the program to the Window-Operations tab (Window > Actions) or press the keyboard shortcut Alt+F9 to open the options window. At the bottom of the Actions panel that opens, click on the folder icon to create a new set of your actions. Enter a name for the folder (in this example, "Psdtuts+").

Now, after you have created a New Set of Operations, click on the New Operation icon at the bottom of the panel (a piece of paper with a folded edge, like a new layer icon). In the dialog box, enter a name for the operation: Vintage Halftones (Vintage Halftone), and then click on the “Record” button (Record) to start from this moment recording all your actions on the image. As you can see, at the bottom of the operation panel there are three icons designed to control the actions being performed: record, play and stop (Record, Play, Stop).

Step 3.

From this moment we will begin the sequential construction of operations on the photo. You need to be extremely careful when performing each step, otherwise the result will not meet your expectations.

The first step is to resize the photo. To do this, go to the top menu in the Image-Image Size tab (Image > Image Size) and in the dialog box change the width value (Width) up to 700 px. Activate the “Maintain proportions” function (Constant Proportions) and "Interpolation" (Resample Image) at the bottom of the window, and also select the option at the very bottom “Bicubic sharper (best for reduction)” (Bicubic Sharper), which is well suited for photographs of not very good quality and small size.

Don't use Transform to resize (Free Transform), since precise mathematical values are needed here. The entered parameters will be applied only for similar horizontal images, while such values will not be suitable for vertical images.

Click OK in the dialog box and proceed to the next step.

Step 4.

Now, when performing each complex step, we activate the “Reset samples” function (Reset Swatches) by pressing "D" on the keyboard. The foreground and background colors are set to black and white.

Now, double-click on the background thumbnail, unlock it, convert it to “Layer 0”, and then drag it onto the New Layer icon (sheet with a folded edge) at the bottom of the Layers panel to create a duplicate.

Step 5.

Now, on the “Layer 0” copy, go to Filter-Filter Gallery (Filter > Filter Gallery) and in it select the folder Distortion – Diffused Glow (Distort > Diffuse Glow). We make the settings for the option: grain size 2, glow level 3, original 10. Click OK.

Step 6.

On the copy layer, change the Opacity level (Opacity) by 75%, entering the value exactly into the option window. There is no need to use the slider to change the parameter, otherwise the recording will display a gradual decrease in opacity: 100, 99, 98, 97, etc., which is undesirable.

Now, while holding Ctrl, click on the original layer, selecting it and the copy in the layers panel. Right-click on the selected layers and select from the menu – Merge Layers (Merge Layers). As a result, the two layers will be merged into one “Layer 0 copy”.

Step 7

Duplicate “Layer 0 copy” by dragging it onto the New Layer icon at the bottom of the layers panel, and we get “Layer 0 copy 2”. On the duplicate, go to the Filter-Blur-Gaussian Blur tab (Filter > Blur > Gaussian Blur) and set the blur radius to 2 px, click OK.

Step 8

Next change the blending mode (Blending Mode) for a duplicate on the Floor (Overlay), without opening the blending modes window, but by clicking on the down arrow in the options window in the layers palette and selecting the desired mode. You can try different blending modes outside of recording by first stopping the recording with the Stop button (the square at the bottom of the action bar). Having selected the desired mode, turn on Recording again by clicking on the circle at the bottom of the panel.

Step 9

Next, create a New Adjustment Layer “Color” (Adjustment Layer > Solid Color). To do this, click the black and white circle at the bottom of the layers panel and select the “Color” option from the drop-down menu. In the options dialog box, select black color (# 000000) fill and click OK. Drag this layer down to the bottom of the Layers panel under "Layer 0 copy".

Step 10

Go to the “Layer 0 copy” thumbnail, and then go to the Layers tab - Layer mask - Hide all (Layer > Layer Mask > Hide All).

Step 11

Now we will change the borders of our image. To do this, select the mask by clicking Ctrl+A(“Select All”) on the keyboard. It is important to select all the pixels of the mask, otherwise the future result will not impress you.
Be sure to use the "Select All" command (Select All), rather than making a selection manually with the Marquee Tool. (Marquee tool).

If you are using custom selection then Photoshop will save these coordinates and values only for a specific image, which will not work on other images.

Step 12

Activate the Rectangular Marquee Tool (Marquee tool) and right-click on the image. In the drop-down menu, select the option – Transform selected area (Transform Selection), and in the top settings panel change the values for width (Width) and heights (Height) allocation by 95%. To apply a function, press Enter twice (Enter).

Thus, your allocation will decrease by exactly 5% from its initial state.

Step 13

Now we'll distort the shape of our selection a little to create a vintage effect. Make sure you are on the Layer 0 copy mask and your selection is reduced. Go to the Selection - Refine Edge tab (Select > Refine edge) and enter the settings from the screenshot below. Click OK.

You should end up with an uneven selection, like the example below.

Step 14

Next, fill the selection with white (ffffff). Press "D" on your keyboard to reset color swatches (Swatches). Next, activate the Rectangular Marquee Tool. (Marquee tool) and right-click on the canvas, selecting the option from the menu - Fill (Fill). Specify a foreground color (Foreground Color), opacity 100% and mode normal. Click OK. Deselect (Ctrl+D).

Step 15

Now you need to repeat the entire previous process with the frame for the layer “Layer 0 copy 2”. You can repeat steps 10 to 14, or duplicate the actions in the Actions panel. First, go to the "Copy 2" layer in the Layers panel and click the Stop button in the Actions panel to stop recording for now. Select all operations with the frame and duplicate them. To do this, go to the first action with a frame in the “Operations” panel (the “Make” line (Make)) and holding Shift, click on the most recent operation with the frame (line Define selection (Set Selection)). Then click the arrow at the top right and select the option from the list - Create a duplicate (Duplicate). Now drag the line “Select layer “Layer 0 copy 2” over the duplicated actions and stand on the line “Make” (Make), click Play to duplicate the mask. Once a copy of the mask has appeared on the “Copy 2” layer thumbnail, go to the last line in the Actions window and click the Write button to move on.

Step 16

Activate the layer mask thumbnail “Layer 0 copy” and go to Filter-Filter Gallery (Filter > Filter Gallery). Click on the Sketch folder (Sketch), and in it on “Halftone pattern (Halftone Pattern). After entering the settings, click OK.

Step 17

Go to the “Layer 0 copy 2” layer and click on the adjustment layers icon (black and white circle) at the bottom of the layers panel. Select the Photo Filter correction from the list (Photo Filter) and activate the "Color" option (Color) in the dialog box. Click on the color square and enter the color value 957345 and the density (Density) increase to 100%.

Step 18

Now, create another Hue/Saturation Adjustment Layer. (Adjustment Layer > Hue Saturation), clicking on the black and white circle at the bottom of the layers panel, and adjust the values from the screenshot below. Don't forget to activate the "Rendering" checkbox in the option window:

Step 19

In the Layers panel, create a New Layer (Ctrl+Shift+N) or a leaf icon with a folded edge at the bottom of the panel)) above all the previous ones and name it “Layer 1”. Select all by clicking Ctrl+A, and activate the Rectangular Marquee tool (Marquee tool). Set the foreground and background colors to default (“D”). Right-click on the canvas and select the option – Fill (Fill). In the dialog box, specify the foreground color (black), opacity 100%, mode normal and click OK.

Step 20.

Double-click the Layer 1 layer thumbnail to open the Layer Styles window and select the Pattern Overlay option. (Pattern Overlay). Open the Gray Paper pattern set (Grayscale Paper), and it has the texture “Gray Granite” (Gray Granite).

Step 21

To rasterize this layer, create a new layer (Ctrl+Shift+N) above the patterned one and select them both in the layers panel ( Ctrl+click on the layers icon). Then, combine them into one by pressing Ctrl+E.

Step 22

Change the blending mode (Blending Mode) for the layer “Layer 2” to Multiply (Multiply), and Opacity (Opacity) reduce to 75%.

Step 23

Now let's flatten all layers. Select all layers in the layers palette, starting with “Layer 2” and ending with the “Color” layer at the bottom, holding Shift.
Right-click on the selected layers and select from the menu – Flatten (Flatten image). Then click the Stop button in the “Operations” window (Actions). Now all our completed actions are ready to be applied to other photos or images.

Now it's time to check how our recording works for other shots. If you did everything correctly, the program will process your images perfectly.

To repeat all the steps with another photo, open it in Photoshop, select the Vintage Halftones action and click the Play button (the triangle at the bottom of the Actions panel).

Now you need to save this set of operations. Go to the name of the operation set, in this example to the line “PSDTUTS+” and click the down arrow at the top right of the window. In the drop-down menu, select the option - save operation (Save Actions). In the dialog box, enter a name for the operation and save it anywhere on your computer. Now we are ready for batch editing of images.

Creating a droplet.

The droplet applies actions to one or more images (a folder of images). You can save the droplet anywhere on your computer and use it as many times as you want. To create a droplet, go to the top menu File-Automation-Create Droplet (File > Automate > Create droplet...). In the dialog box that opens, first select the folder where you will save the droplet. In line Set (Set) specify the name of the set (“PSDTUTS+” in this example), in the operation line indicate the name of the set operation ("Vintage Halftones").

Next, select the photo folder to which you want to apply the effect, after making a copy of it, and work with it. In addition, you can customize the names of future images, add text to them, series number, extensions to ensure maximum compatibility. Once you have entered all the required information, click OK.

In the example below, you can see that I placed the droplet in a folder with a lot of photos in it.

Now select the images from the copy folder and drag them onto the droplet icon to apply its actions to the photo. The program itself will download the images and process them, saving all the images in the folder specified by you. Finally, open the folder with the changes you made and see how your photos now look.

Now you have a whole collection of vintage photos ready to print or use on your blog. Good luck!