How to increase the power of the vacuum cleaner turbine. An easy and homemade way to increase vacuum cleaner traction

Not everyone can afford to buy new household appliances. Thanks to this article, everyone will be able to learn how to increase the power of a vacuum cleaner at home with their own hands. Today there are many different methods. Therefore, if you observe that your vacuum cleaner has become worse, do not immediately panic and look at the prices of new equipment. With the help of some tips, you can eliminate this incident.

How to increase the power of a vacuum cleaner without handing over for repairs

If the operation of the vacuum cleaner has deteriorated over time, then you can eliminate this factor yourself. How to increase absorption? There are only two main reasons why this nuance can form:

The assembly of parts was not carried out according to the instructions, so some parts are fixed incorrectly or not completely.
Dirty, not cleaned filters.

If the vacuum cleaner was not assembled according to the instructions, and it does not contain a function that should notify about incorrectly installed parts, it will naturally not work at full capacity. As a result, garbage, wool, hair from carpets and even dust from a conventional laminate is not completely absorbed.

Before use, the first step is to check the filters. Most often, they are the cause of poor absorption. Depending on the brand and model of the vacuum cleaner, the number of filters will depend. The maximum number reaches 4 pieces, you need to check each one separately. If the filter is broken or cannot be cleaned, it must be replaced. If there is still a chance for cleaning, it is better to use the wet method. Models that use a bag to collect garbage require additional inspection. In this situation, you need to check whether the bag is damaged, how full it is. It is recommended that if the container is 80% full, it is first cleaned and then reinstalled.

Devices that have a tank for collecting dirt in the form of an Aqua filter are cleaned using the following method:

First, you need to pour out the dirty water.
Wash the filter container.
Pour clean water and replace the filter.

If the vacuum cleaner does not have significant breakdowns, then the above 2 methods should help you. As practice shows, 85% of people who are faced with the problem of poor absorption are solved in these ways.

Advantages and disadvantages of filters

Here we will look at the advantages and disadvantages of each type of filter for a vacuum cleaner. There are three main types of vacuum cleaners:

Vacuum cleaners without bags are cyclone vacuum cleaners or as they are also called container vacuum cleaners.

Detergents that work with water contain an aquafilter.

And the most common type of apparatus is containing a classic bag. Suitable for both dry and wet cleaning. Instead of a bag, there can be a dust collector.

These species have a wide range different models, among them are those who remain satisfied customers, but also from which one disappointment remains.

Cyclonic

Vacuum cleaners do not contain dust collectors and bags. Thanks to modern technology, it is no longer necessary to use Dyson's invention. European manufacturers for a very long time did not want to produce this type of vacuum cleaner, knowing that they have many shortcomings, but the desire of consumers turned out to be higher. Appeared on trading floors, store shelves quite recently, about 5 years ago. At that time, they had a high cost, and not everyone could afford to buy it.

Today, a lot of users of cyclone filters are disappointed with their purchase. It remains to understand why, and for this you need to consider the pros and cons:

It has very good advertising, thanks to which the vacuum cleaner has become very popular
No need to spend extra money on bags. In European countries, a couple of dollars are saved per month.
Do good cleaning air from dust, which eliminates well with the help of a rotating vortex, that is, a cyclone.
If the container is almost full, this does not affect the suction of the vacuum cleaner, there is no need to increase it.

There are benefits, but they are minor. Now consider the disadvantages:

With aquafilter

As soon as these models were released, they were very popular for cleaning in the hospital, special productions or laboratories. Both before and now they have an expensive cost, as they carry out dry and wet cleaning at the same time. Now consider why they became famous.

When using household appliances, they often encounter situations where their power drops, which reduces the performance of devices and the comfort of their use. This is especially true for vacuum cleaners, when it becomes impossible to complete a quality cleaning. What affects the drop in their power and how to restore it - more on that later.

The drop in vacuum cleaner power can occur in different ways. If this is observed gradually over time, then the reasons may be in incorrect or loose assembly of parts, clogged filters.

Devices with improper assembly show less efficiency in work than those assembled in full accordance with the technology. With a loose arrangement of parts, additional air is drawn in outside the working units, which leads to a decrease in the performance of the units, a drop in their power. You can increase the latter only by disassembling the vacuum cleaner and reassembling it correctly.

The first thing you need to pay attention to with a gradual drop in power is the condition of the vacuum cleaner filters. It is in them that most often lies the reason for the decrease in the performance of the unit.

Today, many different vacuum cleaners are produced. They may have one filter, but there are models with four filters. You need to check everything and, according to the state, decide to replace them or you can limit yourself to cleaning.

If the filter in the vacuum cleaner is in the form of a bag bag, then it is worth checking not only the level of filling it with debris and dust, but also the integrity of the fabric. If the unit is equipped with an aquafilter, then water is first poured out of it, after which it is rinsed.

If the power drop in the vacuum cleaner occurs sharply, then the most common cause of the situation is an object stuck in the hose. The problem is easily solved: the unit is turned off; the tube is checked for lumen; if any blockage is found, then it is removed by pushing with a long object.

A sharp loss of vacuum cleaner power can occur if you accidentally turn the power control lever, which is on the body and are on the hose handle. Restoration of the unit's performance occurs after bringing it to the desired position.

If all the actions described above did not lead to the restoration of the previous power, then the reason is most likely in problems with the electric motor or electronics of the vacuum cleaner. You can fix this only by contacting a specialized workshop for help.

Instruction

How to increase the power of the vacuum cleaner for better suction and dust from the rug? Do one useful thing - look at the filter system of your vacuum cleaner. It may be clogged and therefore lose suction power. The first in the filtration system is the bag, which is the main barrier to dust entering the vacuum cleaner with a stream. Open the lid of the dust container (it is usually on a latch), pull out the bag into which the garbage is collected, pour its contents into the trash can and knock out the dust container well. After that, check it for integrity; if it is without holes, then insert it back, while not pressing the bag against the hole that leads to the vacuum cleaner motor. Discard the disposable bag and insert a new one.

The second filter, which serves to protect the motor from accidental dust particles, is located in front of the motor. Check it regularly too, but not as often as the dust box. To check the second cleaner, remove the bag and pull out the filter, which is located in front of the motor opening, by pulling it up. Cleaning this equipment will slightly increase the power of the vacuum cleaner.

If you have an inexpensive vacuum cleaner, then it should have a flat filter made of pressed microfiber material or foam rubber; if it is damaged, find a similar material and cut the same part with scissors. On more expensive units, there may be non-filters that are washable. If you have one, then take the filter and wash it under a warm stream of water, then dry it and install it back. Be sure to check the filter for holes. Even more expensive filters are carbon filters. They are the most practical and reliable. They also need to be washed, dried and reinstalled in a vacuum cleaner.

The last filter in the cleaning system is located after the motor at the air outlet of the vacuum cleaner - it captures coal dust from the brushes of the electric motor. This final filter has the least effect on power, but still contributes to it when completely clogged with debris. There should be a cover at the outlet of the air jet from the vacuum cleaner - remove it and find and pull out the filter under it, they are usually made of sheet filter material marked FST 0001. If it is clogged and painted black from the dust of the motor brushes, it is better to replace it. Look for the same material in spare parts stores or pick up a similar one, cut out a new one according to the size of the old filter, and then install it under the cover. It should be noted that such filters are used not only in simple vacuum cleaners, but also in bagless vacuum cleaners and vacuum cleaners with an aquafilter.

In the process of active use of household appliances, situations may arise when their performance is no longer enough for comfortable use. This is especially noticeable with vacuum cleaners when it becomes impossible to finish cleaning properly. In this case, you need to know how to increase . Consider several ways to do it yourself.

If the efficiency of the vacuum cleaner gradually decreases over time, you can fix it yourself. two reasons his such behavior. These include:

Incorrect or loose assembly of device parts.
Clogged filters.

If the device is assembled incorrectly, and it does not have the function of protecting it from incorrect assembly, then the device may simply work with less efficiency.

If the parts of the unit are not installed tightly, then the additional air drawn in will significantly impair the operation of the device. An increase in power in these cases is possible after disassembly and subsequent correct high-quality assembly of the unit.

Be sure to check the filters of the vacuum cleaner, it is they who most often cause a decrease in its absorption.

In various device models, there may be up to 4 filters, and you need to check the status of each of them. Depending on the type of filter, it may need to be replaced or simply dry or wet.

What to do with a sudden change in power

If during the cleaning process the suction efficiency of the unit dropped sharply, then most likely the cause will be an object stuck in the tube. Solving this problem is very easy. It is necessary to turn off the device and check the condition of the tube against the light. If you find a piece of paper, a small toy or other object, simply remove it, and the device will work properly again.

However, such a situation may also occur when, during cleaning, the power switch lever on the device case was accidentally touched. If this is true, then simply return the lever to its previous position.

In addition, the tube also has a lever that controls the absorption of the device. Perhaps this lever was accidentally pressed, and a hole opened, where excess air began to be sucked in, which also reduced the efficiency of the device.

Having corrected all these points, you can continue cleaning as planned. If all these measures have not received a proper response from the device, then you will have to seek help from qualified specialists.

How to increase power without turning to professionals

If the efficiency of the vacuum cleaner gradually decreases over time, you can independently eliminate two reasons for this behavior. These include:

Incorrect or loose assembly of device parts.
Clogged filters.

If the device is assembled incorrectly, and it does not have the function of protecting it from incorrect assembly, then the device may simply work with less efficiency.

Be sure to check the filters of the vacuum cleaner, it is they who most often cause a decrease in its absorption.

In various device models, there can be up to 4 filters, and you need to check the status of each of them. Depending on the type of filter, it may need to be replaced or simply dry or wet cleaned.

In models with a dust bag, you need to check the integrity of this bag, be sure to clean it, and then reinstall it. For devices with an aquafilter, you need to pour out the water and rinse the container (for more information about servicing devices, see the eternal vacuum cleaner, or the rules for caring for household appliances).

What to do with a sudden change in power

However, such a situation may also occur when, during cleaning, the power switch lever on the device case was accidentally touched. If this is true, then simply return the lever to its previous position.